How do i find out the speed of file transfers

Hi all, first i have to admit i dont actually have a Time Capsule, i have a Western Digital MyBookLive with which i backup my MacBookPro using Time Machine.
I have also upgraded my Router to one with Gigabit LAN, my MacBookPro is gigabit and so is my WD MyBookLive gigabit !!!.
I already realise that file tranfers can in NO WAY can get anywhere near gigabit speeds, but, neverthless how do i find out how fast my gear does transfer files ?.
I am currently backing up using TimeMachine using a wire, i would like to see the actual difference between Wired and Wireless transfers.
Any suggestions would be very much appreciated !. thanks for looking.

woweee, thanks for that buddy, i should have thought of that, thanks.
I bet you guessed it already ?.
Can someone explain all the information shown in the Activity Monitor
I have the Network Tab selected: i have Data recieved at anywhere between 100 and sometimes as high as 400
whereas data sent is always under 10 !
peak is about 8 so does Data sent refer to to My Time Machine Backup GOING TO my Network Hard Drive ?
if so where is the Data recieved stuff, going to or coming from ?. it is all a bit confusing for me, i think i better go back to bed and lay down LOL.

Similar Messages

How to find out the size of files transferred over the SQL * Net?

I am trying to test the Advanced Compress (AC) for 11g Data Guard. When the AC is turned on, the archived log files are supposed to be compressed on the primary database server and sent over SQL*Net, then decompressed on the standby db server. We will see the file sizes are the same on both primary and standby servers. I want to verify that the AC works by monitoring how much data are sent over SQL*Net. Per Oracle, AC uses 35% less of the bandwith. That means the size of the files transferred should be at least 65% of the original size.
Is there a way to find out the size through Oracle utilities? If not, how to find out by OS utilities? OS is Solaris 5.10.
Thanks.

I'm not sure this can be done via SQL*Net, but a network packet sniffer between the two servers should be able to help - you might want to contact your network team.
HTH
Srini

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How can I find out the apn number of the battery without having it?

I dont have the battery of my iphone 5 anymore but how can i find out the apn number of the battery? I would like to change it but i need to know the apn number to choose the right battery.

Apple does not provide any user-serviceable parts (other than accessories or sometimes a SIM card tray).
Therefore, there are no legitimate iPhone batteries available for sale anywhere.
Anything you find will either be salvaged, counterfeit, or stolen.

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

How do i find out the tables (data)effected in a schema after a particular time stamp

how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
pls email in [email protected]

You can't do that. That would be a real security risc.
/KAj

How do i find out the tables effected in a schema after a particular time stamp

how do i find out the tables effected in a schema after a particular time stamp?
pls email in [email protected]

If you are doing a reload every time then you can issue following commands to clear data from cube.
lmt name to all
allstat
clear all from <cubename>prttopvar
You can wrap above commands in pl sql procedure using dbms_aw.execute package and execute it before cube load starts. Instead of clearing it from whole cube you can clear only from one partition also. Just take a look at clear command in olap DML 10.2 reference.
Thanks,
Brijesh
Edited by: Brijesh Gaur on Aug 10, 2010 6:47 AM

How do i find out the speed of file transfers

Similar Messages

Maybe you are looking for