How do I find out the time of my browsing history in iPad Safari
Dear all,
I require a detail of my own iPad browsing history, here is my problem:
My MBP got stolen recently and have a personal cloud service installed on it. Just checked my cloud server and found a odd IP-address record, just need to confirm if I have accessed my cloud account at that time on my iPad or possible was originated from the stolen MBP.
Cloud server indicated showed activity from one recognised IP from my own house @20.38 and an unknow IP @23.38
Hence I want to check the exact time that I visit the cloud service via my Safari browser (iPad), but as far as I could get is all the browsing history are grouped by date and I cannot find the time information, can anyone helps?
Thanks
There is no built in way to see the time in the Safari Browsing history. There may be a third party computer application that would allow you to extract the information from the iPad, but the function is not built into the iOS.
Similar Messages
-
How can I find out the overall time and not only the time of a single clip?
I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.
-
How can i find out the more than one times occurance of integer in a array?
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....
Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so. -
How do i find out the tables (data)effected in a schema after a particular time stamp
how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
pls email in [email protected]You can't do that. That would be a real security risc.
/KAj -
How do i find out the tables effected in a schema after a particular time stamp
how do i find out the tables effected in a schema after a particular time stamp?
pls email in [email protected]If you are doing a reload every time then you can issue following commands to clear data from cube.
lmt name to all
allstat
clear all from <cubename>prttopvar
You can wrap above commands in pl sql procedure using dbms_aw.execute package and execute it before cube load starts. Instead of clearing it from whole cube you can clear only from one partition also. Just take a look at clear command in olap DML 10.2 reference.
Thanks,
Brijesh
Edited by: Brijesh Gaur on Aug 10, 2010 6:47 AM -
How do I find out the version of Oracle Time Zone files?
Hello there,
How do I find out the version of Oracle Time Zone files? I'm in the process of applying the recent oracle patch and need to find out the version of oracle time zone in my db. Could you please help me?run
SELECT version FROM v$timezone_file; -
How can i find out the last time a back up to icloud was done
How can i find out the last time a back up was done to icloud?
Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.
-
How do I find out the date and time a picture was taken on my Ipad?
How do I find out the date and time a picture was taken on my Ipad?
Photo Manager Pro
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/7a2b3650710f4bded81 ab75dda6a3ee5.jpg -
How to find out the time when the ASE started?
Normally, ASE not reboot for production. Only for maintenance or performance tuning, maybe need to reboot ASE.
Question is how to find out the time when ASE was started?
one way maybe is check errorlog. Any more simple way no need to login to server OS?Hi Kent,
In ASE 12.5 and up, you can do 'select @@boottime' For older releases, a general method is 'select crdate from sysdatabases where dbid=2'
1> select @@boottime, crdate from sysdatabases where dbid=2
2> go
crdate
Jul 15 2014 9:19AM Jul 15 2014 9:19AM
(1 row affected)
Cheers
Dan -
How can I find out the dpi of an image in Acrobat.
How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.
Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties. -
How do i find out the size of a webpage?
how do i find out the file size of a webpage im viewing in my
browser? and how do i find out the size of a webpage of my
own?Hello,
Try this site out.
Just enter your URL.
http://www.websiteoptimization.com/services/analyze/
Take care,
Tim
"name294" <[email protected]> wrote in
message
news:gpiuqv$9on$[email protected]..
> how do i find out the file size of a webpage im viewing
in my browser? and
> how do i find out the size of a webpage of my own? -
How do I find out the size of a file, trying to make a DVD and told the fil
Made a slide show project with music and trying to write to dvd. Computer tells me the file is to large and to use a dual sided disk. I cut may slides out but no luck. How do you find out the file size?
Hi
And SlideShows has a limit of 99 slides per show.
I rather assemble mine in iMovie HD 6 where as QuickTimeKirk states
it only has Time as a limit dep. on encoding method selected and if Single or Double layer DVDs
Single Layer (for DL double time) - TIME includes menu - keeping it simple gives more to movie.
(I prefere "Brushed Metal" no audio, no animation.)
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
Yours Bengt W -
How do I find out the ID of a reminder created with an applescript?
I created an applescript to create a reminder from Quicksilver, but I want it to show the reminder once it has been created if Reminders was already open. If I use this, then another reminder with the same name sometimes gets shown. How do I find out the ID of a reminder when I create it and set it to a variable so that it will select the reminde I want it to, and if this is not possible, how should I do it?
Here is the applescript:
using terms from application "Quicksilver"
on process text reminderData
if reminderData is "help" then return "Syntax: \"Name:Priority Time Date List Notes\""
set isName to true
set isPriority to false
set hasBeenPriority to false
set priorityEntered to false
set isTime to false
set hasBeenTime to false
set timeEntered to false
set isDate to false
set hasBeenDate to false
set dateEntered to false
set isList to false
set hasBeenList to false
set listEntered to false
set isNotes to false
set reminderName to ""
set reminderPriority to ""
set reminderTime to ""
set reminderDate to ""
set reminderNotes to ""
set reminderList to ""
set reminderDataCharacters to the characters of reminderData
repeat with i from 1 to number of items in reminderDataCharacters
set currentItem to item i of reminderDataCharacters
if isName is false and hasBeenPriority is false then set isPriority to true
if hasBeenPriority and hasBeenTime is false then set isTime to true
if hasBeenTime and hasBeenDate is false then set isDate to true
if hasBeenDate and hasBeenList is false then set isList to true
if hasBeenList then set isNotes to true
if isName then
if currentItem is ":" then
set isName to false
else
set reminderName to reminderName & currentItem
end if
end if
if isPriority then
if currentItem is "!" or currentItem is "-" then
if currentItem is "!" then set reminderPriority to reminderPriority & "!"
set priorityEntered to true
else
if currentItem is " " and priorityEntered then
set isPriority to false
set hasBeenPriority to true
end if
end if
end if
if isTime then
if currentItem is " " then
if timeEntered then
set isTime to false
set hasBeenTime to true
end if
else
if currentItem is not "-" then set reminderTime to reminderTime & currentItem
set timeEntered to true
end if
end if
if isDate then
if currentItem is " " then
if dateEntered then
set isDate to false
set hasBeenDate to true
end if
else
if currentItem is not "-" then set reminderDate to reminderDate & currentItem
set dateEntered to true
end if
end if
if isList then
if currentItem is " " then
if listEntered then
set isList to false
set hasBeenList to true
end if
else
if currentItem is not "-" then set reminderList to reminderList & currentItem
set listEntered to true
end if
end if
if isNotes then set reminderNotes to reminderNotes & currentItem
end repeat
if reminderDate is not "" then
if reminderTime is "" then set reminderTime to time string of (current date)
end if
if reminderTime is not "" and reminderTime does not contain "am" and reminderTime does not contain "pm" then
try
if (item 1 of the characters of reminderTime) as number is greater than or equal to 8 and (item 1 of the characters of reminderTime) as number is less than or equal to 11 then
set reminderTime to reminderTime & "am"
else
set reminderTime to reminderTime & "pm"
end if
end try
end if
try
set reminderDateAndTime to date (date string of (date (reminderDate & "/" & last word of (date string of (current date)))) & " " & time string of (date reminderTime))
on error
set reminderDateAndTime to false
end try
createReminder(reminderName, reminderPriority, reminderNotes, reminderList, reminderDateAndTime)
tell application "Quicksilver" to show notification "The reminder was created successfully" text "Quicksilver successfully created your reminder."
end process text
on createReminder(theName, thePriority, theNotes, theList, theDate)
if thePriority is 1 then set thePriority to 9
if thePriority is "!" then set thePriority to 9
if thePriority is 2 then set thePriority to 5
if thePriority is "!!" then set thePriority to 5
if thePriority is 3 then set thePriority to 1
if thePriority is "!!!" then set thePriority to 1
tell application "System Events"
if exists process "Reminders" then
set wasOpen to true
else
set wasOpen to false
end if
end tell
tell application "Reminders"
if theDate is false then
try
make new reminder at list theList with properties {name:theName, body:theNotes, priority:thePriority}
on error
make new reminder with properties {name:theName, body:theNotes, priority:thePriority}
end try
else
try
make new reminder at list theList with properties {name:theName, body:theNotes, remind me date:theDate, priority:thePriority}
on error
make new reminder with properties {name:theName, body:theNotes, remind me date:theDate, priority:thePriority}
end try
end if
if wasOpen then
show reminder theName
else
quit
end if
end tell
end createReminder
end using terms fromThis seems to find the ID, which is sort of the answer to my question, but I still don't seem to be able to use it to show to right reminder. I get this error:
error "Reminders got an error: Can’t make reminder id \"1E436B16-561C-4F88-8CA6-78029BE68BBF\" into type integer." number -1700 from reminder id "1E436B16-561C-4F88-8CA6-78029BE68BBF" to integer
What is wrong, and how should I fix it?
Here is the createReminder block now:
on createReminder(theName, thePriority, theNotes, theList, theDate)
if thePriority is 1 then set thePriority to 9
if thePriority is "!" then set thePriority to 9
if thePriority is 2 then set thePriority to 5
if thePriority is "!!" then set thePriority to 5
if thePriority is 3 then set thePriority to 1
if thePriority is "!!!" then set thePriority to 1
tell application "System Events"
if exists process "Reminders" then
set wasOpen to true
else
set wasOpen to false
end if
end tell
tell application "Reminders"
if theDate is false then
try
set theReminder to make new reminder at list theList with properties {name:theName, body:theNotes, priority:thePriority}
on error
set theReminder to make new reminder with properties {name:theName, body:theNotes, priority:thePriority}
end try
else
try
set theReminder to make new reminder at list theList with properties {name:theName, body:theNotes, remind me date:theDate, priority:thePriority}
on error
set theReminder to make new reminder with properties {name:theName, body:theNotes, remind me date:theDate, priority:thePriority}
end try
end if
set theID to the id of theReminder
if wasOpen then
show theID
else
quit
end if
end tell
end createReminder -
How can I find out the audio sampling rate of BetacamSP tape?
Hi guys
I'm trying to digitize BetacamSP tape. But I'm afraid if I might choose wrong setting...
This tape is from very long time ago so we don't know which audio sampling rate we recorded with..
How can I find out the audio sampling rate of this BetacamSP tape?
Thanks:)The sampling rate is set by the Sony DVMCDA2 you are using, when the conversion is made from the analog input to the digital (DV) output. You should be outputting standard DV which is 16bit 48khz audio.
Assuming you are in the US, your Easy Setup for FCP should be DV-NTSC, and then open the Log and Capture Pane and set the Capture Settings Device Control to Non-Controlable Device and you should be good to go.
You will have to roll the deck manually and start and end your capture manually.
You can download a user manual for the DVMCDA2 by clicking here.
MtD -
How can i find out the resolution and accuracy of PXI-6602 module?
I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.
Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments
Maybe you are looking for
-
Not able to connect with nokia music store in lumi...
Getting frustration to connect to Nokia music store in my Lumia 920.. Basically this device brought at singapoor and now am using @ India...i doesn't know the reason.. While connecting to store, itz showing unable to connect and contact Nokia service
-
All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC
Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged
-
some of my ideas are 1. lockscreen widgets 2. the ability to kill all running apps with just one button 3. having the ability to select your albums and songs within the pull up controll center 4. Incorperating battery saving technologies from maveric
-
Is there a way to update my first Gen ipod to 3.1.3 software?
Ok I got a ipod gen 1, my current firmware or i guess software is 1.1.5 and I was wondering how to update the software to 3.1.3. Or if there isn't a way to do that what is the lastest I can update my software too? I just really need the app store and
-
No matter how I try to work around it, any introduction of a psd file into assets crashes DVD SP3. Photoshop CS DVD Studio Pro 3 OS X 4.8 G4 Dual 450 Mac OS X (10.4.3)