How do I find out when there are pending update for ipad2 model A1396
Hello,
How and where would I go within my ipad2 model A1396 to find out if it's pending system automatic updates.
How to update your iPhone, iPad, or iPod touch
Similar Messages
-
Way to find out of there are pending updates
Is there a way in Oracle 8.1.6 to find out if there are any uncomitted inserts, updates, or deletes on the current transaction?
I do not need to know what they are, only if there are any at all.
WHY?
I have a piece of architecture in my client that runs on a timer and will sometimes perform updates. I want to skip the timer code if there are any pending updates so that the timer's updates do not get intermixed with updates from the main application.
I tried putting the updates into a package function that used an autonomous transaction, but when it got into production the DBAs complained that the database was generating strange errors that they were told are dangerous, and I had to turn off this functionality.
Thanks for your help,
Chris Elvart
SBC Public CommunicationsChris, there is not any method to see if row are locked before you try to access then so on an 8.1.6 version you could change your routine to use a select for update. If the cursor returns one of the requested rows is waiting on a commit. You can trap the error that indicates a row is in use, rollback, sleep, and then try again.
The problem with this is a select for update must retrieve all the rows before you can process any of them so unless the target set is small this may not be practical. Also you can commit only at the end.
You could select all the target rows in a cursor then perform a select for update on each row. With error trapping this would allow you to skip pending rows.
Just some ideas for you to consider.
HTH -- Mark D Powell -- -
How do I find out when openreach are connecting my...
Ok so I'm now at the point of tearing my hair out....
After a fault with our line almost 2 years ago I got talking to the engineer. He told me that the board in the exchange that runs our broadband is set for fibre but would need all the other work to be completed for it to go live i.e cabinet and cables layed ect ect but I should expect something to happen within a year. So I waited and waited and waited. I contacted BT whom I am a customer about said roll out in my area. They told me they do not have that information at which time the Openreach website line checker said the exchange was enabled but nothing else.
So I waited some more and last October/November (2014) we had sub contractors ask if they could store their plant machinery on our land.. we asked what they were doing to which they replied "digging the road and laying the tubeing for fibre cables for BT Openreach" . They also told us that they were there just to dig the road and NOT lay the cables.
After the work was completed I still heard nothing but then later found out that BT Openreach had installed the cables but had not connected said cables to our serving cabinet. We spoke to another Openreach engineer working outside our property and asked what they were doing and we were told its was work being carried out for "OUR" fibre broadband. (the cables stop at our property and go nowhere else we are literally at the end of the line).
So I have waited some more. Contacted BT (my ISP) and have been told yet again they do not know that information.
Again waited some more then tried the line checker via the openreach website this time I was greeted with your serving cabinet is now connected and ready for fibre orders..... guess what BT have told us that that cabinet is indeed live but our property is not connected.
Openreach (via website) tell me to contact my ISP and when I do (BT) they tell me they do not have that information. I am being sent in very small circles. I know the line is there I know the excahnge is active and my serving cabinet is live but I can't contact anyone to find out when this work is going to be completed. Obviously OpenReach would be my best bet but there is no contact details for end user enquiries.
Some one is sat in an office sending out workmen/engineers. How on earth do I find this out???????????
Before I get any replies I know I have fibre line to the property I know my cabinet is live and I now my excahnge is ready. It seems that the only thing that needs doing is the line to the cabinet need connecting/activating. I want to know when or how I go about finding this out. I am on these forums as a last ditch attempt. I find it very frustrating that time and money as been invested closing and digging the road and setting everything up for it not to be completed and then make it impossible to find out why.Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved. -
How can I find out if there are any masters (not referenced) in my library?
Hi!
I've been using Aperture for a while (most masters are on different hard drives, but maybe some are in my library by mistake when I imported them), now want to consolidate all my photo-masters on a separate "photo" hard drive and leave in my Aperture Library only the previews and the adjustments.
I have some projects in my library, and my library is 12 GB. Is there a quick way to find out if any of my masters are in the library so I can "take them out" and put them on my separate HD?
If there was a way to sort by "badge" and see the ones not referenced that would be nice.
In the future I will be more careful when importing to make sure my photos are always in the right place and referenced.
Thanks for any help!Easy. Add Rule "File Status" = "Managed".
Make a Smart Album, store it in your top level Smart Albums folder (I put all my Library administration Albums there), and check it before doing a full back-up, or regularly. I keep recent shots on my MBP internal drive so I can work on them wherever I am. After a month or so I relocate the Masters to my big external drive.
Note that Managed Masters/Versions are likely already differentiated by badge. Referenced images have a "link arrow" badge. Managed images do not. -
How do I find out if my EW4 is updated for Service Pack 2?
I see no way to find if my Expression Web 4 has the Service Pack 2, which evidently has been updated for HTML5, CSS3 and JQuery. How do I check this out?
If you want the latest version of EW4, download the completely free and final version. If that's what you have (version 4.0.1460.0, with the notation below "This is a free copy"), you're done: you have the latest and there will be
no more updates. -
My iPad will not connect to iTunes, the app store, or the update, although it will go on the internet. What to do?
And what does the error message say?
-
How to find out if there are repeated characters in a string
hey guys
well i kinda have a little problem figuring out how to find out
if there are repeated characters in a string.
if anyone can help, would appreciate it.
thanks
milosTry using the StringTokenizer class. if u already know which character to trace. this could do the job.
eg. String str = "here and there its everywhere";
StringTokenizer st = new StringTokenizer(str, "e");
int rep = st.countTokens(); -
How can I find out when 1.9 is coming to my area
I live in 90266 in CA. How can I find out when 1.9 is going to be released in my area?
VZ does not publish the upgrade schedule. I think messages are sent to the STB a day or two before the upgrade occurs but that is it. I understand some information may be put on dslreports about the ugprades pending.
Being a community leader I don't even have access to the upgrade schedule. This is kept close to the folks within VZ. I can say that the east coast upgrades are put on hold while VZ CWA workers are striking.
Jim -
How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada. -
My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
Yellow12It may be that the 10 songs are unchecked. To find them select songs view.
If there is a column Heading marked with a tick then click on it to sort by this column.
If the Column is not there then View > View Options and select the Checked column which will then display
Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well -
HT4211 how can you find out what kb are being used by what apps
how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone
Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.
-
How do I find out what accounts are authorized to sync with my iPod?
I'm trying to download a video onto my iPod classic, but I keep getting a message saying it won't download because the iPod can only contain information from five different accounts. But when I checked how may accounts were authorized, iTunes said there were only two accounts out of the available five that were authorized. I really want this movie on my iPod but I'm not sure where to go from here?
"How do I find out what computers are authorized to use my Store Account? "
The ones that you authorized. There is no list.
"Do my iPhones count towards the 5?"
No.
ONLY computers count. -
How do I find out what applications are running in the background
I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.
open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses
-
How can I find out what calendars are in my .mac account?
A simple question, but I am struggling with the answer.
I have used ical since it first came out and have found it brilliant and very easy to use and access both from the office and also from home. However because I have used it for so long I have had various changes in staff. I am keen to find out if there are any 'other' calendars created by anyone who has/had access to ical via my .mac account.
The calendars must be stored somewhere online? How can I find out what calendars I am hosting?Hello, chunnyb.
Thank you for visiting Apple Support Communities.
Here are the steps on how to view your purchase history in iTunes.
iTunes Store: See your purchase history and web order numbers
http://support.apple.com/kb/ht2727
If you need to report and issue with a purchase, see the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Cheers,
Jason H. -
How do I find out what features are not useful in my Classifier?
How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp hp drat wt ...
Mazda RX4 21.0 6 160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0 6 160 110 3.90 2.88 ...
Datsun 710 22.8 4 108 93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html
Maybe you are looking for
-
How can I connect my iTunes account with PayPal?
How can I connect my iTunes account with PayPal? In the payment method page (I access it by iTunes for Mac) there's no PayPal button! PS: I live in Italy
-
Square box appears in betwen 2 characters
Hi all, Suppose the prompt of the text is 2 or more character and a enter in between the word in designer mode. I am capturing the prompt value in the database. And when I want to display the prompt based on the value stored, it displays a box in bet
-
Problems building JavaDoc of classes using Hibernate/javax.persistence
Hallo! I am trying to create the javadoc of classes that use hibernate. First it starts of with error messages like [javadoc] SubmissionSet.java:40: cannot find symbol [javadoc] symbol: class Table [javadoc] @Table(name="submissionset"/*, schem
-
Airport problems after latest update password
Yesterday I did a software update and airport was one of the updates listed. After the update neither my desktop or laptop would connect to the airport network. I used the airport utility to re set up the airport base station and was able to get my l
-
Hard Drive Icon (Macintosh HD) Disappeared - How do I get it back
Hi, My Macintosh HD Icon that has been at the top right of my desktop forever is gone. Anyone know how to restore it? Getting to the hard drive now is a pain. Thanks.