How do I find the code address for my downloaded setup file

I'm installing WINE and it has asked me for the address of my "downloaded setup file" as this is my first foray into computer code I have no idea where to look for this. any one know?

Have you looked in Your Downloads folder, or wherever your Browser is set to save downloads to?

Similar Messages

How do i find the email address for my HP Deskjet 3051A

I need to find the email address for my printer to finish up my eprint capabilties for my IPad Air.
I have a HP Desktop 3051A wireless printer.

Hi mjs208, thanks for posting your question
Here are the exact steps you'll need for that email - please follow this document: Getting Started with ePrint
If you also need more information on Airprinting, here is the link for that as well: How to Use Apple's AirPrint Over a Wireless Network
Cheers
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

How do I find the Mac address for my 8900?

I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
Thank you,
Animal
Raising teenagers is like trying to nail
jell-O to a tree!

Found it,
Overview
To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
Click Options.
Click Status.
The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
Raising teenagers is like trying to nail
jell-O to a tree!

How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

How do I find the web address for an encapsulated steam?

I recently saw a tip somewhere on how to do this, but I can't remember where. Basically you did something to find the actual web address of a stream and then you could paste this address in your regular address bar. Then you could use the activity window and save the stream to disk.
Anyone know how to do this?
Thanks.

Amber,
I remember reading that tip too, but I cannot find it after a quick search. Was it something to do with searching for the actual URL in the source code for the page (View>View Source)? I'll post back if I come up with the post. I'd like to be able to do this too.
By the way, if you want to record the audio stream, you can use an app such as Audio Hijack: http://www.rogueamoeba.com/audiohijack/
or Wiretap:
http://www.ambrosiasw.com/utilities/wiretap/
Regards,
Steve M.

How do I find the email address for my C8180 so I can print from my iPad2?

I am trying to set up my C8180 printer to print with my iPad2. It is shown as a supported printer. I am being asked for the printer's email address but I have been unable to locate it. Any suggestions on where to find it if it exists?
This question was solved.
View Solution.

Hi,
Dis you look at the list ? The list (updated on Feb-13) does not contain your printer. In short no support.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you find the mac address for the Standby Supervisor

sho int mgmt0 works for the active but how do I get it for the standby on a Gen1 c9509 running 3.3.(1c) ?

I figured it out.
sho module x (where x is the slot number of the standby sup.) Here's the output:
The Standby Supervisor
switchname1# sho module 6
Mod Ports Module-Type Model Status
6 0 Supervisor/Fabric-1 DS-X9530-F1-K9 ha-standby
Mod Sw Hw World-Wide-Name(s) (WWN)
6 3.3(1c) 4.0 --
Mod MAC-Address(es) Serial-Num
6 00-0e-38-c5-bc-80 to 00-0e-38-c5-bc-84 JAB00000000
The Active Supervisor
switchname1# sho module 5
Mod Ports Module-Type Model Status
5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active
Mod Sw Hw World-Wide-Name(s) (WWN)
5 3.3(1c) 4.0 --
Mod MAC-Address(es) Serial-Num
5 00-0e-38-c5-bf-64 to 00-0e-38-c5-bf-68 JAB00000001
The output is much nice on my ssh session.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do I find the FTP info for my site?

I created a site with Wix.com. Since then I've been exploring Dreamweaver, and the author of "Dreamweaver for Dummies" suggets that the best way to make changes to my existing site is to use Dreamweaver's FTP capabailities to download the existing pages. But Wix doesn't support FTP -- so they tell me, and simpleurl.com (where I regeistered my domain name) and which is somehow involved in the posting of my site) can't help either. Here's the Dreamweaver page that I need to fill in.
How do I get this information?

Yup, it's basically free, altho you can upgrade a little, as I've done.
And I took
a careful look at the "source" for the pages I've created. That code will
show
nothing of what I've written -- text-wise. It's all stored on the Wix
servers
and accessed with various scripts. You can re-locate your Wix-created site
after 60 days -- not before. So the suggestion I got from the "...Dummies"
book doesn't apply here.
Nonetheless, I'm going to continue to learn how to use Dreamweaver. Maybe
after my 60 days are up I'll wanna move it. Don't know.
MurraySummers http://forums.adobe.com/people/MurraySummers created the
discussion
"Re: How do I find the FTP info for my site?"
To view the discussion, visit:
http://forums.adobe.com/message/5993566#5993566

How do i find the IP address of my printer?

I have an HP 7130 all-in-one printer connected to a windows computer that is connected to a wireless router and modem. im using my macbook, which is also wireless to the same modem, and i am trying to set up a printer which requires the IP address of the printer it cannot find on its own. How do i find the IP address of the printer?
Thanks!

Hi Gavin,
Actually it was a typo fault on my behalf. Unfortunately the 7130 will not have an IP address as it doesn't have an Ethernet connection - just USB.
So, you are either going to have to connect the printer to the Windows computer and print from the Mac via the share or get some other hardware to share the printer. There are a number of wireless print servers on the market which allow you to connect your printer to its USB socket and then print wirelessly from your Windows and Mac computers. Or you could look at replacing the router with an Airport Extreme, which has a USB port for a printer.
If you want use what you have then connect the printer to the Windows computer and share it. Then on your Mac, open the Printer Setup Utility and click Add. Click More Printers and then Windows Printing > Network Neighborhood. You should see the Workgroup name set in the Windows computer appear. If it doesn't then wait several minutes and try again (sometimes it can take a while before Windows computers appear in this list). Once the workgroup name appears double click it and select the computer from the new menu. At this stage you may be prompted for a user name and password for the Windows computer. Input this information and then the printer share should appear. Select it and then browse for your printer model. Now there is a good chance that your model is not listed under the HP menu so you will have to use one of the provided drivers in the list and see which one works best for your printer. Once you have selected an appropriate model click Add. Now you should be able to print via wireless..
Regards,
Paul

Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

How I can find the Delivery address changes in purchase order

Hi Friends,
How I can find the Delivery address changes in purchase order
item details.And how i can find who did ths changes.

Hi,
Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes.

Redemption code help that you keep sending everyone to is NOT HELPING. It just tells you to put in the redemption code. IF I HAD THE CODE I WOULD HAVE PUT IT IN!! How do I find the code?

Redemption code help that you keep sending everyone to is NOT HELPING. It just tells you to put in the redemption code. IF I HAD THE CODE I WOULD HAVE PUT IT IN!! How do I find the code?

Version 5.5 was/is not part of the Cloud, so you could not have subscribed to that version
You install version 5.5 on a 2nd computer exactly the same way you did the 1st time... put the disc in the drive and enter your serial number when asked
Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

I was gifted an app and it says this code has already been used How do i find the code.

I was giften an app and when i got to itunes it said this code has already been used. I don't even know how you find the code when you are gifted an app from someone. My question is how do you find the code to enter when you are gifted an app?

See here: iTunes 10 for Windows: Redeem an iTunes allowance, gift certificate, or Gift Card
B-rock

How do I find the code address for my downloaded setup file

Similar Messages

Maybe you are looking for