How do i find the IP address of my printer?

I have an HP 7130 all-in-one printer connected to a windows computer that is connected to a wireless router and modem. im using my macbook, which is also wireless to the same modem, and i am trying to set up a printer which requires the IP address of the printer it cannot find on its own. How do i find the IP address of the printer?
Thanks!

Hi Gavin,
Actually it was a typo fault on my behalf. Unfortunately the 7130 will not have an IP address as it doesn't have an Ethernet connection - just USB.
So, you are either going to have to connect the printer to the Windows computer and print from the Mac via the share or get some other hardware to share the printer. There are a number of wireless print servers on the market which allow you to connect your printer to its USB socket and then print wirelessly from your Windows and Mac computers. Or you could look at replacing the router with an Airport Extreme, which has a USB port for a printer.
If you want use what you have then connect the printer to the Windows computer and share it. Then on your Mac, open the Printer Setup Utility and click Add. Click More Printers and then Windows Printing > Network Neighborhood. You should see the Workgroup name set in the Windows computer appear. If it doesn't then wait several minutes and try again (sometimes it can take a while before Windows computers appear in this list). Once the workgroup name appears double click it and select the computer from the new menu. At this stage you may be prompted for a user name and password for the Windows computer. Input this information and then the printer share should appear. Select it and then browse for your printer model. Now there is a good chance that your model is not listed under the HP menu so you will have to use one of the provided drivers in the list and see which one works best for your printer. Once you have selected an appropriate model click Add. Now you should be able to print via wireless..
Regards,
Paul

Similar Messages

  • How do i find the email address for my HP Deskjet 3051A

    I need to find the email address for my printer to finish up my eprint capabilties for my IPad Air.
    I have a HP Desktop 3051A wireless printer.

    Hi mjs208, thanks for posting your question
    Here are the exact steps you'll need for that email - please follow this document: Getting Started with ePrint
    If you also need more information on Airprinting, here is the link for that as well: How to Use Apple's AirPrint Over a Wireless Network
    Cheers
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • How do I find the IP address of a network Printer

    I have a dell 1320C color netwrk printer connected to a routher with a Cat 5e cable.  I want to find out what the IP address is on the network.  How can my Mac Book Pro auto detect the printer like my Dell laptop used to do?  If it can't auto detect the printer, then how do I find the IP address?

    http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/index.htm# ugtop
    "You can also print the printer settings page by the following. Press and hold the Continue button on the printer until the Ready/Data indicator blinks."
    But it appears your printer only works with Microsoft Windows http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/section19. htm#1056812

  • How I can find the  Delivery address changes in purchase order

    Hi Friends,
    How I can find the  Delivery address changes in purchase order
    item details.And how i can find who did ths changes.

    Hi,
    Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
    For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes.

  • How do i find the email address assigned to my all-in-one wireless printer?

    I am trying to set up my so called"all-in-one" (w/o fax?) to wirelessly print from my mobile or other computers connected to my network. I was referred to the eprintcenter.com site. I then read that I needed to set up an account. while doing so, I was asked to give an email address with the password? (you must be joking?) I went back to read that each device has an assigned email address that I could find by going through the device itself wireless menu.... Uhmmmmm?? I have not been able to find it... Nor, any of the other questions? 

    Hi IDNTLKHPPRODS,
    You can see the email address of your printer on the printer itself. If you tell us the model of your printer, I can point you in the right direction to find that.
    For creating an account on eprintcenter.com, you use your email address--the one where YOU receive your email, not the printer's email address. Once you have that account and have added your printer to it, you can customize the email address so it is something easier to remember.
    I hope this helps!
    JamieAtHP
    I work on behalf of HP.

  • How do I find the IP address of a wireless printer (via bonjour) on my Airport Extreme?

    I can see the MAC address of my macbook and the printer using the AirPort Utility, but I can't find the actual IP. Attempting to connect through the printer utility puts:http://hp88388e.local./ in the URL, but the page just hangs. isn't there a numerical address associated with the printer? how can I find it?

    Thanx for the help! It was not the problem, however. I fixed the issue. Here is what happened:
    Because the HP D110 printer was set up manually with the previous UBEE wireless router cable modem, the printer's IP address stayed fixed at 192.168.0.238 even after I performed a "factory reset" through the touch-screen menu. bonjour is apparently able to "see" the printer, and even establish a physical layer of communication with the printer, but it is unable to transfer data to and from the printer. Thus, while the network detected and could establish a link, no tasks could be accomplished (i.e. ink levels, paper out, actual printing, etc). additionally, the link to go to the printer webpage was dead (that was my first clue).
    I tried hooking it up via the USB port on the airport extreme, and it would work perfectly. After I set it up, it automatially printed a test page and I discovered that it was still 192.168.0.238 - even though the airport extreme had it listed in the logs as 10.0.1.3. I figured that was the problem, but I was still unable to log into the printer webpage to reset the IP on the printer side.
    Because I was unable to force the airport extreme to assign the printer to the existing address, I had to keep playing around with the on-screen menu. Evenually I found that inside the wireless menu, there is an option to reset all wireless parameters, and once I did this, I deleted the printer and added it again from the print/fax utility. this time, it worked wirelessly, and the printer web page could be accessed.
    As an aside, the apple interface to the print/scan/fax settings were far smoother, faster, and more intuative than the HP utilities written by HP on windows! Hope this helps anyone who is also stuck.

  • How do I find the IP address of a website?

    I'm accessing a website through Firefox. How do I find out what the IP address of this website is?

    *ShowIP: https://addons.mozilla.org/firefox/addon/showip/

  • How do I find the web address for an encapsulated steam?

    I recently saw a tip somewhere on how to do this, but I can't remember where. Basically you did something to find the actual web address of a stream and then you could paste this address in your regular address bar. Then you could use the activity window and save the stream to disk.
    Anyone know how to do this?
    Thanks.

    Amber,
    I remember reading that tip too, but I cannot find it after a quick search. Was it something to do with searching for the actual URL in the source code for the page (View>View Source)? I'll post back if I come up with the post. I'd like to be able to do this too.
    By the way, if you want to record the audio stream, you can use an app such as Audio Hijack: http://www.rogueamoeba.com/audiohijack/
    or Wiretap:
    http://www.ambrosiasw.com/utilities/wiretap/
    Regards,
    Steve M.

  • I have a brand new MacBook Pro . I am trying to connect to the private wifi at my house but I need the IP address of my laptop . Everywhere I go on the laptop, the IP address is blank . How do I find the IP address if laptop is not connected to the wifi

    I have a brand new MacBook Pro and I'm trying to connect to the private wifi at my house however, I need the IP address. Everywhere I go to find it, the adress is blank. What do I do ?

    Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
    To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

  • How do I find the ip address of an NAS server attached by ethernet to my time capsule

    Hi
    I recently had a problem with a USB drive attached to my time capsule. It appeared as a problem even after disconnecting. I reset my time capsule and all is working well except that I can no longer login to administer my Seagate NAS 220. It is working and the volumes all appear but due to the Lion upgrade the software to adminster it no longer works. I must login via the internet. The previous IP (10.0.1.4) no longer can find the drive. How do I learn the correct IP?

    Look in the dhcp client table in the log.

  • How do I find the Mac address for my 8900?

    I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
    I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
    Thank you,
    Animal
    Raising teenagers is like trying to nail
    jell-O to a tree!

    Found it,
    Overview
    To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
    Click Options.
    Click Status.
    The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
    Raising teenagers is like trying to nail
    jell-O to a tree!

  • How do I find the MAC address for the time capsule?

    I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

    On the bottom label it should list the MAC address.
    If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
    But you see that was before Apple reduced the airport utility to the status of a toy..
    Pretty pictures no info.. think kid's book.
    See very very pretty.. as a UTILITY though.. useless.

  • How do I find the MAC address of a CLIENT ACCESS POINT created from the FILE SERVICES ROLE

    I have several Client Access Points created within the clustered File Services Role.  The only way I seem to be able to determine the MAC address of each of these, is by visiting the DHCP server.
    Does anyone know if there is a way of reporting on this from the server (active node) itself?  I have tried ipconfig all, checked the properties of the CAP in the FCS console etc.
    Many thanks.
    Kathleen Hayhurst Senior IT Support Analyst

    Hi,
    As far as I know there have no original option for query all the CAP MAC address, may you can create a PowerShell command then filter the configuration result, you can ask
    in PowerShell forum for the further help.
    More information:
    PowerShell forum:
    http://social.technet.microsoft.com/Forums/en-US/bf0e249b-a9f3-4bef-a536-c210b3f09340/powershell-script-to-alert-on-failed-system-state-backups?forum=winserverpowershell
    The related KB:
    Failover Clusters Cmdlets in Windows PowerShell
    http://technet.microsoft.com/en-us/library/hh847239.aspx
    The related article:
    PowerShell for Failover Clustering: Frequently Asked Questions & Enabling CSV
    http://blogs.msdn.com/b/clustering/archive/2009/05/23/9636665.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I find the MAC address of a paired bluetooth device?

    I have just connected a bluetooth device to my MacBook.  When it was pairing, it displayed the MAC address of the device, but a few seconds later, the MAC address was replaced with a test description of the device.  I need to figure out what that MAC address was.
    For clarification, this is not an ethernet connection, it is Bluetooth.  The device is a type of headset, it has no use accessable interface, and no the address is not on the device itself.
    Thanks,
    -- JC

    Open System Preferences > Bluetooth
    Select the device on the left.
    Then click the asterick with a downward facing arrow then click More Info.
    The Addrress will show on the right.

  • How do i find the email address that my redemption code is attached to?

    Hello My name is Yakira and I'm a fashion design student. My school sent out emails that had links for students to follow in order to download a free copy of Adobe Suite.  I followed the instructions and Creative Cloud only allows me to use TRIAL versions of the software.
    I just got off Technical Support with my school and they informed me that the email address that is attached to my redemption code is different than the email address I used to download the software in the first place.
    The reason for that is because my school was recently bought by another company and the overall email address that was used with the Adobe account is not the same one that out campus uses now. Instead of telling students to use the older email address a lot of students are confused as to why they cannot access their Adobe Suite
    So I have the Redemption code but I need the email address that the redemption code is linked to so that I can download everything again.
    Hope  my explanation was not that confusing.
    Regards,
    Yakira

    Moving this discussion to the Adobe Creative Cloud forum.

Maybe you are looking for

  • Safari keeps crashing on launch. Help!

    A few hours ago my friends downloaded and installed a program onto my Macbook Pro. I don't know what it was, but it never actually downloaded. Instead what they ended up installing was some add-on to Safari called InstallMac. I guess it was some sort

  • How to install iTunes 11.4 back?

    A few days ago I made the foolish mistake of "upgrading" (if you can say that) to iTunes 12 on my MacBook Pro (with OS X 10.8.5) and now I am in the biggest remorse... iTunes 12 is horrible, lacks of sidebar and make sync with iPhone / iPad a real ni

  • System allows GRs to be reversed after invoices have posted and clear

    Users have noticed that it is possible to post a GR, post and clear and Invoice, then reverse the GRs, which is an audibility problem. Previously (possibly before upgrade to ECC 6) this was not possible.Is there any configuration available to change

  • Check marks when texting

    I've recently noticed that when I send texts on my phone to other numbers that are Verizon there is no longer a check mark to confirm that they have received the text. I have a Samsung intensity 2 and its always done the check mark thing before. I wa

  • CS3 JS Default Styles/Formating

    When I click a swatch or or table style in ID with nothing selected they become document's defaults, applied to each new object. Can I access these settings via JS? I've found document property called "textDefaults" but it only deals with text settin