How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

Similar Messages

  • How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • How do you find the mac address for the Standby Supervisor

    sho int mgmt0 works for the active but how do I get it for the standby on a Gen1 c9509 running 3.3.(1c) ?

    I figured it out.
    sho module x (where x is the slot number of the standby sup.) Here's the output:
    The Standby Supervisor
    switchname1# sho module 6
    Mod Ports Module-Type Model Status
    6 0 Supervisor/Fabric-1 DS-X9530-F1-K9 ha-standby
    Mod Sw Hw World-Wide-Name(s) (WWN)
    6 3.3(1c) 4.0 --
    Mod MAC-Address(es) Serial-Num
    6 00-0e-38-c5-bc-80 to 00-0e-38-c5-bc-84 JAB00000000
    The Active Supervisor
    switchname1# sho module 5
    Mod Ports Module-Type Model Status
    5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active
    Mod Sw Hw World-Wide-Name(s) (WWN)
    5 3.3(1c) 4.0 --
    Mod MAC-Address(es) Serial-Num
    5 00-0e-38-c5-bf-64 to 00-0e-38-c5-bf-68 JAB00000001
    The output is much nice on my ssh session.

  • How do I find the Mac address for my 8900?

    I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
    I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
    Thank you,
    Animal
    Raising teenagers is like trying to nail
    jell-O to a tree!

    Found it,
    Overview
    To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
    Click Options.
    Click Status.
    The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
    Raising teenagers is like trying to nail
    jell-O to a tree!

  • I need to change the MAC Address for Airport on MacBook

    I have a specific need to change my son's Airport MAC address as his school requires the use of USB network cards that aren't compatible with MACs. These cards are needed because the school's router uses MAC address filtering.
    Before we upgraded his Mac to Snow Leopard, we were able to change the MAC address to the MAC address of the useless dongal the school supplied. We basically created an AppleScript program that ran the "sudo ifconfig en1 ether xx:xx:xx:xx:xx:xx" and all was good.
    This command no longer works for changing the MAC address. We tried it as root user as well and by typing it into the terminal window as root. After running the command, we can run "ifconfig en1" and it does display the new mac address but when we turn the airport on and try to connect, it just hangs and won't connect.
    Our other non-Snow Leopard still works fine after running the commands so I'm guessing Apple disabled this functionality. It's hardly a security issue by being able to change your mac addres.
    Is there a new way to accomplish this? I've searched everywhere.
    Thanks!

    Would an easier solution be to provide the school's IT admin with your mac address and have it added? If they can add a block of mac addresses for the usb dongles, they can add more for machines that cannot use the dongle.
    Also: "It's hardly a security issue by being able to change your mac address."
    While it may not be a security issue for your machine, it is a security for the school network who is using mac address filtering as hopefully only one part of their wireless security.
    That being said, have you read this?
    http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/

  • How to get the MAC address of the additional 10G NIC with ILO command line

    how to get the MAC address of the additional 10G NIC with ILO command line?
    thanks.
    This question was solved.
    View Solution.

    Hi Bruce,
    Out from what I can find on this network card is it not possible to get the mac address without a OS. I would recommend you to get/burn a Linux/Ubuntu live CD/DVD and run a Ifconfig in there.
    Hope it helps you.
    Best regards
    Zincas
    I work on behalf of HP

  • Luxadm probe / Could not find the loop address for  the device at physical path

    Using EMC FibreChannel Disks on a Solaris 10
    # luxadm probe
    No Network Array enclosures found in /dev/es
    Error: Could not find the loop address for the device at physical path.
    # echo $?
    255
    Any ideas how to fix?
    Thank,
    Marcel

    Hi Marcel,
    Which Solaris 10 release is this?
    I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
    its mostly seen on Solaris 8 and 9.
    https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
    The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display. 
    This process runs in the background so the user is not aware that another luxadm display process is running.
    Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
    I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
    Let me know if the workaround helps or so I can follow-up with the right support team.
    Thanks, Cindy

  • How do I find a "download button" for the Flash Player 11.x?

    How do I find a "download button" for the Flash Player 1.x updateon my Mac? All I find is a download tag for other products on the Adobe Flash Player 11.6.602.180" page.

    You don't even need a button.
    Either:
    <a href="docs/mytext.pdf">My text</a>
    Or:
    <a href="docs/my text.pdf"><img src="images/pdf.gif"
    width="34" height="20" border="0"></a>
    where the image is the pdf symbol
    GP01

  • Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
    http://www.apple.com/contact/
    B-rock

  • HT2486 How do I remove the grey "contact" selection highlight?  This contact always appears as the email address for the group I want to send to.

    How do I remove the grey "contact" selection highlight?  This contact always appears as the email address for the address book group I want to send to.

    The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact.   When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box.  The group name should appear in the email box, but it doesn't.  This began to happen after I upgraded to IOS 10.6.8.  However I'm not sure that has anything to do with the problem?  I do not have "show all member addresses selected."  Your help is appreciated.

  • E4200 v2 - Uses multiple MAC addresses for the same device

    This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
    After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
    Seems the V1 had the same issues that they did not fix on this.
    The Cisco connect software shows 5 devices the Web based utility shows 3??.
    Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

    I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
    Secondly, may I  know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

  • What is the IP address for the HP Color Laserjet CM1312nfi MFP?

    I need to install my HP printer that is hooked up to a wireless network to an iMac.  (as a shared printer)  
    What is the IP address for the HP Color Laserjet CM1312nfi MFP in order for me to install in the apple?  Thanks.

    AirPort Utility can be used to configure and change the settings on any of the AirPorts.
    If you have a Mac, AirPort Utility is here:
    Macintosh HD > Applications > Utiltiies > AirPort Utility
    If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

  • Getting the MAC address of the iPhone

    Hi,
    In order for an iPhone (or any other network device) to access or wi-fi network, it needs to be registered. I would like to make it so that they don't have to register it every time and to do that, I need the MAC address of the device. Users will be registering via a webpage using the browser on the phone. Is there any way in the midst of that process that I can query the iPhone for it's Mac address?
    Thanks,
    Rob Tanner
    Linfield College

    You can get the MAC address for your iPhone at Settings > General > About > Wi-Fi address.
    There is not a way to query the iPhone for the MAC address to be entered automatically in the space provided when registering the iPhone's MAC address via the webpage, but it can be written down in advance for manual entry of the address.

  • How do I stop the IP address on my Time capsule from changing

    I am running 2 security camera's that run on DHCP. I need to enter my IP address plus the camera name as the URL to view. But the IP address on my Time Capsule keeps changing. How do I stop this from happening?

    Welcome to the discussions, GimpyRich!
    But the IP address on my Time Capsule keeps changing. How do I stop this from happening?
    The IP address is issued to the Time Capsule by your internet service provider and it is normal for it to change from time to time, sometimes daily.
    You should ask your internet service provider if they can furnish you with a "Static" IP address so that the Time Capsule will always have the same IP address.
    If your provider offers this option, there will likely be an additional fee for this service.

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

Maybe you are looking for

  • Issue in Updating Customer specific fields in WBS using BAPI_BUS2054_CREATE_MULTI

    Hi Experts, I am able to create the WBS element using BAPI_BUS2054_CREATE_MULTI.But the issue is i am not able to update customer specific fields even after passing the fields as per specification in Function module documentation. I have also created

  • Using adobe to fill out online pdf forms

    i downloaded adobe reader 9 to help me fill out pdfs online for college in the fall - but it won't let me fill out the forms! i already went to adobe's help site. any suggestions?

  • The java preferences won't open Help needed

    Hello im a new mac user and there is a problem with it every time I try to go in to Java Prefrences it starts bouncing but it won't open. Please help.

  • Encore CS5.1/5.5 Project flat lines during transcoding

    I have attempted to render this project out 5 times now. See attached screen shots. The transcoding just stops at the same point every time. I've left it for over 24 hours a few times and still cannot complete the transcode. I have even attempted to

  • Archived PO still appears in VL10B

    Dear All, I have a PO which has been Archived many years ago but still appears in VL10B when ran wide open for Shipping point. I do not get any error message also when I try to create the delivery and delivery too do not get created. I just need this