How do I find the MAC address of a CLIENT ACCESS POINT created from the FILE SERVICES ROLE

I have several Client Access Points created within the clustered File Services Role.  The only way I seem to be able to determine the MAC address of each of these, is by visiting the DHCP server.
Does anyone know if there is a way of reporting on this from the server (active node) itself?  I have tried ipconfig all, checked the properties of the CAP in the FCS console etc.
Many thanks.
Kathleen Hayhurst Senior IT Support Analyst

Hi,
As far as I know there have no original option for query all the CAP MAC address, may you can create a PowerShell command then filter the configuration result, you can ask
in PowerShell forum for the further help.
More information:
PowerShell forum:
http://social.technet.microsoft.com/Forums/en-US/bf0e249b-a9f3-4bef-a536-c210b3f09340/powershell-script-to-alert-on-failed-system-state-backups?forum=winserverpowershell
The related KB:
Failover Clusters Cmdlets in Windows PowerShell
http://technet.microsoft.com/en-us/library/hh847239.aspx
The related article:
PowerShell for Failover Clustering: Frequently Asked Questions & Enabling CSV
http://blogs.msdn.com/b/clustering/archive/2009/05/23/9636665.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How can i find out which of my apple devices made a purchase from the app store?

    How can i find out which of my apple devices made a purchase from the app store?

    Not possible as purchases can be downloaded to all devices using the same Apple ID.

  • Is there a way to Limit the number of guest accounts a Sponsor can create from the sponsor portal?

    Hello,
    I am trying to find a way to limit the number of guest accounts a Sponsor can create from the portal. I am running ISE 1.2 and I am finding it difficult to limit the number of guests a sponsor can create.

    Interesting feature that unfortunately is currently not possible. I also don't think this is a feature that will be offered in the highly anticipated v1.3. I would recommend that you reach to your Cisco team and request this feature. 
    Thank you for rating helpful posts!

  • How can I find my MAC address on macbook pro?

    I just bought a new macbook pro with the lion software and can't find my MAC address.

    Did you look under the System Preferences > Network > Airport (or Ethernet) > Advanced
    The Airport ID or Ethernet ID is your MAC address, depending on which one your using.
    You can also use the Terminal
    http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/

  • How do I find the MAC address for the time capsule?

    I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

    On the bottom label it should list the MAC address.
    If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
    But you see that was before Apple reduced the airport utility to the status of a toy..
    Pretty pictures no info.. think kid's book.
    See very very pretty.. as a UTILITY though.. useless.

  • How do I find the MAC address of a paired bluetooth device?

    I have just connected a bluetooth device to my MacBook.  When it was pairing, it displayed the MAC address of the device, but a few seconds later, the MAC address was replaced with a test description of the device.  I need to figure out what that MAC address was.
    For clarification, this is not an ethernet connection, it is Bluetooth.  The device is a type of headset, it has no use accessable interface, and no the address is not on the device itself.
    Thanks,
    -- JC

    Open System Preferences > Bluetooth
    Select the device on the left.
    Then click the asterick with a downward facing arrow then click More Info.
    The Addrress will show on the right.

  • Advantage of cloning the MAC Address?

    What's the advantage of cloning the MAC Address?
    Solved!
    Go to Solution.

    There is no "advantage" of cloning the MAC address. The only advantage would be to have internet or not.
    In many cases, it is absolutely unnecessary to use the MAC address clone.If you have a working internet connection through your router then there is no need to use the MAC address clone function.
    Only when you find that you have a working internet connection on one computer directly on your modem but not when you connect through the router (or a different computer directly on the modem) then it is necessary to use the MAC address clone function.
    This usually is only the case with cable TV ISPs. They only allow you to have a single active internet connection at any time. They do this by remembering the MAC address which connects through a specific modem. If you first connect a computer for tests directly to your modem you'll have an internet connection. Now if you connect a different device to your modem it doesn't it's because the ISP has still locked the internet connection for the MAC address of the first computer.
    How to remove the lock depends on the ISP and the modem. Sometimes it's enough to reset the modem or to power down everything. Sometimes you have to power down everything for a few hours and after that the first connecting device is the one with the internet connection (i.e. make sure to connect the router then...) If you want to know exactly how your ISP does this you should ask them...
    The simple workaround is to use the MAC address clone function. The router "clones" the MAC address of the first computer, i.e. it basically pretends to be that computer. The MAC address is accepted by the ISP and is immediately allowed to the network. You have a working internet connection either directly on the first computer or through the router because both use the same MAC address. (It's no problem on the router because the MAC address is used on the internet port only...).
    Of course, you have to remember all this. If at some later time you connect a different computer directly to the modem (e.g. you have connection problems and you want to find out what's wrong) you may "lock" in a different MAC address for your connection and you'll have to wait again to regain the connection for a different device.
    But again: there is absolutely no need to use the clone function if you have a working internet connection through your router.

  • My MACBook Pro has been stolen. Is there any possibility to know the MAC Address from serail number? If I well understood the MAC address can not be changed and therefore the MACBook could be found if connected to Internet. Thanks for any support. Cri

    My MAC Book Pro has been stolen one month ago. I would like to know if the MAC address (that should be an unique identifier of the MAC) can be found in order to trace where the computer is should it be connected to Internet. Thanks for any support on this matter! Cristina

    Here's a link from Apple on stolen mac products.
    http://support.apple.com/kb/HT2526?viewlocale=en_US&locale=en_US

  • How to find the MAC address of my iPad2?

    My WiFi hot spot has MAC address filter for better security.
    But I cannot find the MAC address of my new iPad2.

    If you need to setup wifi to start the MAC address with iPad, try  the http://www.ipad-tablet-help.com/2010/03/how-to-find-ipad-mac-address.html   to find it out.  Works for iOS5.

  • How to find the MAC address of iPod Shuffle?

    Hi,
    I need to add MAC address of iPod shuffle to the wireless router. Does anyone know how to find the MAC address of iPod shuffle? I would appreciate your help! Thanks.

    Thanks for reply. So then I am not sure why my laptop is not recognizing iPod shuffle when it is connected through USB cable. I don't see DEVICES option under iTunes..so can't sync the music.

  • How to find out the mac address of T61

    Is there any way to find out the mac address of a T61, without physically accessing the machine. I have the machine type as well as the serial number. 
    Man deals and God stacks the decks

    there's no way to cross-reference an MTM/SN with a MAC address.   you'd need to connect to the system via a network, remote desktop, etc.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • How do I find the Mac address for my 8900?

    I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
    I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
    Thank you,
    Animal
    Raising teenagers is like trying to nail
    jell-O to a tree!

    Found it,
    Overview
    To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
    Click Options.
    Click Status.
    The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
    Raising teenagers is like trying to nail
    jell-O to a tree!

  • How to find the mac address

    I am trying to connect my iPad to my Netgear router and activate the user list. Amazingly the router status does not show the iPad although it is connected. I used the mac address which I found under settings --> general --> info. I used the WLAN address to add it to the routers user list. Unfortunately it did not work. Any idea which other address I could use and where to find it on the iPad. Thanks for the help.

    Does it show under Options | Status as a WLAN Mac Address?
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • How to get the MAC address of the additional 10G NIC with ILO command line

    how to get the MAC address of the additional 10G NIC with ILO command line?
    thanks.
    This question was solved.
    View Solution.

    Hi Bruce,
    Out from what I can find on this network card is it not possible to get the mac address without a OS. I would recommend you to get/burn a Linux/Ubuntu live CD/DVD and run a Ifconfig in there.
    Hope it helps you.
    Best regards
    Zincas
    I work on behalf of HP

  • How to find mac address of a client computer in specified time and port in WIFI WCS Control system

    how to find mac address of a client computer in specified time and port in WIFI WCS Control system

    WCS record-keeping is very crude.  
    You'll get the time/date when the client authenticated.  You'll get the local inside address but you'll need the router to translate the outside IP address and the port.  
    You will need a proxy server to determine what sites did a wireless client goes.

Maybe you are looking for

  • CDF in FIX statement

    Hi, I am trying to call a CDF from BR. FIX([Currency]) @Fun1(@NAME("Acc1"),@NAME(@CURRMBR([Currency]))); ENDFIX here 'Currency' is a RTP of type members. So user can select multiple currency. This BR runs endless. I don't know why it is not working f

  • Migration time... IMac to Mac Pro?

    I have about 600GB on an iMac (apps and data) that I want to migrate to a new Mac Pro that I have on order. Using the FW800 port on both computers can you give me an estimate as to how long this might take?

  • Landed costs with several vendors

    Hi All, I read in the Help File documentation that it is possible to add several vendors to a landed costs posting. P.e. an invoice concerning the handlingcosts and another invoice concerning the transport of the same shipment.(the goods receipts are

  • Brush Size changing

    Hi, i was hoping to find a quick way of changing the size of a brush, other than using the mouse to click on the brush and move the slider. is there a key I can hold down and move the mouse wheel to change brush size? thanks Harry

  • Debugging routine for output type in purchase order

    HI all,    I am unable to get breakpoint to stop at a custom requirement  routine  for a custom output type (ZSND) for purchase order. I created routine 901 and explicitly add  'break  userid' .  In ME21N, it stops at the routine.  In ME22N, it did n