How do I find the MAC address of a paired bluetooth device?

I have just connected a bluetooth device to my MacBook.  When it was pairing, it displayed the MAC address of the device, but a few seconds later, the MAC address was replaced with a test description of the device.  I need to figure out what that MAC address was.
For clarification, this is not an ethernet connection, it is Bluetooth.  The device is a type of headset, it has no use accessable interface, and no the address is not on the device itself.
Thanks,
-- JC

Open System Preferences > Bluetooth
Select the device on the left.
Then click the asterick with a downward facing arrow then click More Info.
The Addrress will show on the right.

Similar Messages

  • How do I find the Mac address for my 8900?

    I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
    I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
    Thank you,
    Animal
    Raising teenagers is like trying to nail
    jell-O to a tree!

    Found it,
    Overview
    To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
    Click Options.
    Click Status.
    The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
    Raising teenagers is like trying to nail
    jell-O to a tree!

  • How do I find the MAC address for the time capsule?

    I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

    On the bottom label it should list the MAC address.
    If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
    But you see that was before Apple reduced the airport utility to the status of a toy..
    Pretty pictures no info.. think kid's book.
    See very very pretty.. as a UTILITY though.. useless.

  • How do I find the MAC address of a CLIENT ACCESS POINT created from the FILE SERVICES ROLE

    I have several Client Access Points created within the clustered File Services Role.  The only way I seem to be able to determine the MAC address of each of these, is by visiting the DHCP server.
    Does anyone know if there is a way of reporting on this from the server (active node) itself?  I have tried ipconfig all, checked the properties of the CAP in the FCS console etc.
    Many thanks.
    Kathleen Hayhurst Senior IT Support Analyst

    Hi,
    As far as I know there have no original option for query all the CAP MAC address, may you can create a PowerShell command then filter the configuration result, you can ask
    in PowerShell forum for the further help.
    More information:
    PowerShell forum:
    http://social.technet.microsoft.com/Forums/en-US/bf0e249b-a9f3-4bef-a536-c210b3f09340/powershell-script-to-alert-on-failed-system-state-backups?forum=winserverpowershell
    The related KB:
    Failover Clusters Cmdlets in Windows PowerShell
    http://technet.microsoft.com/en-us/library/hh847239.aspx
    The related article:
    PowerShell for Failover Clustering: Frequently Asked Questions & Enabling CSV
    http://blogs.msdn.com/b/clustering/archive/2009/05/23/9636665.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can i find the mac address of a brand new iphone 5 since i can't get to the settings screen untill it's signed onto the web

    I have a brand new iphone. my home wifi router has a mac filter. I can't use my phone until the wifi is set up but i cant set up my phone until it connects to the internet. is there a way to find the mac addreess without getting to the settings menu?

    It's not on the box.
    Try turning off Mac filtering temporarily on your router, finish the setup, then turn it back on. Or use another WiFi hotspot, such as an Apple store or a carrier's store. Or McDonalds. Or Starbucks.

  • How do you find the mac address for the Standby Supervisor

    sho int mgmt0 works for the active but how do I get it for the standby on a Gen1 c9509 running 3.3.(1c) ?

    I figured it out.
    sho module x (where x is the slot number of the standby sup.) Here's the output:
    The Standby Supervisor
    switchname1# sho module 6
    Mod Ports Module-Type Model Status
    6 0 Supervisor/Fabric-1 DS-X9530-F1-K9 ha-standby
    Mod Sw Hw World-Wide-Name(s) (WWN)
    6 3.3(1c) 4.0 --
    Mod MAC-Address(es) Serial-Num
    6 00-0e-38-c5-bc-80 to 00-0e-38-c5-bc-84 JAB00000000
    The Active Supervisor
    switchname1# sho module 5
    Mod Ports Module-Type Model Status
    5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active
    Mod Sw Hw World-Wide-Name(s) (WWN)
    5 3.3(1c) 4.0 --
    Mod MAC-Address(es) Serial-Num
    5 00-0e-38-c5-bf-64 to 00-0e-38-c5-bf-68 JAB00000001
    The output is much nice on my ssh session.

  • How to find the MAC address of my iPad2?

    My WiFi hot spot has MAC address filter for better security.
    But I cannot find the MAC address of my new iPad2.

    If you need to setup wifi to start the MAC address with iPad, try  the http://www.ipad-tablet-help.com/2010/03/how-to-find-ipad-mac-address.html   to find it out.  Works for iOS5.

  • How to find the MAC address of iPod Shuffle?

    Hi,
    I need to add MAC address of iPod shuffle to the wireless router. Does anyone know how to find the MAC address of iPod shuffle? I would appreciate your help! Thanks.

    Thanks for reply. So then I am not sure why my laptop is not recognizing iPod shuffle when it is connected through USB cable. I don't see DEVICES option under iTunes..so can't sync the music.

  • How do I find the IP address of a network Printer

    I have a dell 1320C color netwrk printer connected to a routher with a Cat 5e cable.  I want to find out what the IP address is on the network.  How can my Mac Book Pro auto detect the printer like my Dell laptop used to do?  If it can't auto detect the printer, then how do I find the IP address?

    http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/index.htm# ugtop
    "You can also print the printer settings page by the following. Press and hold the Continue button on the printer until the Ready/Data indicator blinks."
    But it appears your printer only works with Microsoft Windows http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/section19. htm#1056812

  • How do i find the IP address of my printer?

    I have an HP 7130 all-in-one printer connected to a windows computer that is connected to a wireless router and modem. im using my macbook, which is also wireless to the same modem, and i am trying to set up a printer which requires the IP address of the printer it cannot find on its own. How do i find the IP address of the printer?
    Thanks!

    Hi Gavin,
    Actually it was a typo fault on my behalf. Unfortunately the 7130 will not have an IP address as it doesn't have an Ethernet connection - just USB.
    So, you are either going to have to connect the printer to the Windows computer and print from the Mac via the share or get some other hardware to share the printer. There are a number of wireless print servers on the market which allow you to connect your printer to its USB socket and then print wirelessly from your Windows and Mac computers. Or you could look at replacing the router with an Airport Extreme, which has a USB port for a printer.
    If you want use what you have then connect the printer to the Windows computer and share it. Then on your Mac, open the Printer Setup Utility and click Add. Click More Printers and then Windows Printing > Network Neighborhood. You should see the Workgroup name set in the Windows computer appear. If it doesn't then wait several minutes and try again (sometimes it can take a while before Windows computers appear in this list). Once the workgroup name appears double click it and select the computer from the new menu. At this stage you may be prompted for a user name and password for the Windows computer. Input this information and then the printer share should appear. Select it and then browse for your printer model. Now there is a good chance that your model is not listed under the HP menu so you will have to use one of the provided drivers in the list and see which one works best for your printer. Once you have selected an appropriate model click Add. Now you should be able to print via wireless..
    Regards,
    Paul

  • How can I get the MAC address of my Apple TV?

    How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
    (to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

    As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
    [http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
    I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

  • How do I get the MAC address from my iPad?Thanksss.

    How do I get the MAC address from my iPad?Thanksss.

    Settings -> General -> About -> Wi-Fi Address
    Regards.

  • How I can find the  Delivery address changes in purchase order

    Hi Friends,
    How I can find the  Delivery address changes in purchase order
    item details.And how i can find who did ths changes.

    Hi,
    Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
    For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes.

  • Where to find the MAC address?

    I just purchased the latest iPod Touch. I need to know the MAC address to register with my WI-FI. Where do I look for it?

    Hello LCMan,
    On your iPod Touch, head to *Settings -> General -> About*. Then look for the *Wi-Fi Address* field and there is where you will find the MAC address.
    B-rock

  • Where can I find the Mac address on somewhere other than my iPod touch? Like the box?

    Where can I find the Mac Address for my iPod Touch? Is it on the box somewhere? I lost my iPod a while ago, but I was told that if I had the Mac Adress, I would be able to retrace it. Help!

    You were told incorrectly.  Knowing the MAC address will not help you track your iPod.  The only way to track your iPod (and then only under limited specific conditions) is to have turned on Find My iPhone on the iPod before it was lost.

Maybe you are looking for

  • Recover from ipod

    I had a complete crash and it seems that my backup is not valid. Is there anyway to restore an iTunes library from my iPod? Thanks

  • Recording sound with correct earbuds?

    With the new 3.1 update and the addition of voice memos, if I get the earbuds with the built in microphone, will that function even work?

  • Restrict alerts - ABAP application error

    Hi,    I need to restrict alerts getting generated for ABAP application error faults. Is there a way to specify exclude these errors in the alert rules or how can i acheive this.    We are having a fault message form ECC, due to application error in

  • Export without "transcoding"? (h264 Eos .mov files)

    Hy! My question is: Is it possible to export from the original footage without transcoding bits that dont need to? I am using a Canon Eos 550d which produces h264 .mov files with 49mbit/sec. As I believe mercury-playback-engine acts as a frameserver

  • Custom Shapes?

    I'm a long-time Photoshop user who's recently started using Fireworks for wire framing websites. It has a lot of advantages over PS in that regard, but I'm used to reaching for my custom shape tool in PS, and in Fireworks I'm not finding anything res