How do I find the number of pixels in height of photos?

I have been asked the following question: If you wish to send book cover images the preferred format is .jpg, 648 pixels high, at a resolution of 100 dpi. Where do I find the answer?

Open the image in Preview .app and Get Info command i
To set the size and resolution in Preview:
Menu > Tools > Adjust Size…
Peter

Similar Messages

  • How do you find the number of lines in a file?

    I need to count how many lines there are in a file, I am using a BufferedReader to read in the data, but how can I find the number of lines?
    Thanks

    That depends. How do you define a line? Is it a specific number of
    characters, a String that's terminated by a newline character or some
    combination thereof?

  • How do I find the number of physical CPUs , number of cores in OEL ?

    In RHEL , it is easy to find the number of Physical CPUs and the number of cores within each CPU
    -- Ouput from Red Hat Enterprise Linux 5.4
    -- This a real machine. Not a VM
    $ cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 46
    model name      : Intel(R) Xeon(R) CPU           X7550  @ 2.00GHz
    stepping        : 6
    cpu MHz         : 1995.048
    cache size      : 18432 KB
    physical id     : 0              --------------> This will give info on the physical CPU
    siblings        : 8
    core id         : 0
    cpu cores       : 8              --------------> This will give the number of cores within a CPU
    apicid          : 0
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm
    bogomips        : 3990.09
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 44 bits physical, 48 bits virtual
    power management: [8]Output from Oracle Linux . Physical CPU Id and Number of Cores info is missing.
    -- Output from Oracle Enterprise Linux 6.3
    -- This is a virtual machine created using Virtual Box
    -- Processor ID , number of cores is missing
    $ cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 42
    model name      : Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
    stepping        : 7
    cpu MHz         : 2298.627
    cache size      : 6144 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc up rep_good nopl pni monitor ssse3 lahf_lm
    bogomips        : 4597.25
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 36 bits physical, 48 bits virtual
    power management:Is this the expected output in Oracle Enterprise Linux ? If so, how can I find the number of Physical CPUs and the number of cores within a Physical CPU in OEL?
    Is this info missing because I am running OEL in a virtual machine ?

    Oracle Linux behaves exactly like Red Hat in this matter an /proc/cpuinfo can be used for that. I guess this is because you have set up VirtualBox to only assign one virtual CPU to your guest Linux.
    processor     : 0
    vendor_id     : AuthenticAMD
    cpu family     : 15
    model          : 33
    model name     : Dual Core AMD Opteron(tm) Processor 275
    stepping     : 2
    cpu MHz          : 1000.000
    cache size     : 1024 KB
    physical id     : 0
    siblings     : 2
    core id          : 0
    cpu cores     : 2
    apicid          : 0
    initial apicid     : 0
    fpu          : yes
    fpu_exception     : yes
    cpuid level     : 1
    wp          : yes
    flags          : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good extd_apicid pni lahf_lm cmp_legacy
    bogomips     : 1994.47
    TLB size     : 1024 4K pages
    clflush size     : 64
    cache_alignment     : 64
    address sizes     : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttpAnother example is this one, OEL 5.6 inside of VirtualBox but with 2 virtual CPUs assigned:
    [root@oel56proxy ~]# cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 23
    model name      : Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz
    stepping        : 10
    cpu MHz         : 2064.652
    cache size      : 6144 KB
    physical id     : 0
    siblings        : 2
    core id         : 0
    cpu cores       : 2
    apicid          : 0
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
    bogomips        : 4129.30
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 23
    model name      : Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz
    stepping        : 10
    cpu MHz         : 2064.652
    cache size      : 6144 KB
    physical id     : 0
    siblings        : 2
    core id         : 1
    cpu cores       : 2
    apicid          : 1
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
    bogomips        : 7494.15I have not tried to replicate this with a VM that only has one vCPU assigned but I guess that is why you only see one CPU and no processor_id and so on.
    Bjoern

  • How do I find the number of users returned by a cfldap query?

    How do I find the number of users returned by a cfldap query?
    I'm not allowed to do something like:
    <cfif ArrayLen(results.rows) gt 1>
    I then get an error:
    faultCode:Server.Processing faultString:'Unable to invoke CFC - Object of type class coldfusion.tagext.net.LdapResultTable cannot be used as an array' faultDetail:''
    Many thanks for any light you can shed

       Cheers again Ian for your many helps,
    it now won't let me do
    <cfqueryparam value="#results.USNCreated#" cfsqltype="cf_sql_varchar">
    I get the message:
    faultCode:Server.Processing faultString:'Unable to invoke CFC - Error Executing Database Query.' faultDetail:'[Macromedia][SQLServer JDBC Driver][SQLServer]The name "results.USNCreated" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.'

  • How do I find the number of contacts in a smart group?

    How do I find the number of contacts in a smart group in Contacts?

    Hi,
    To get the depth using JMS you must create a QueueBrowse and browse the entire queue. Its generally horribly inefficient if you want to do it with any regularity.
    In Hermes I have had to write plugins that open separate connections to providers using their non-JMS APIs or JMX and get that kind of information that way.
    Look at the getDepth() method in this JBoss plugin for an example that uses JMX:
    http://cvs.sourceforge.net/viewcvs.py/hermesjms/Hermes4/src/java/hermes/ext/jbossmq/JBossMQAdmin.java?view=markup
    And here is one for WebSphereMQ that uses one of its many APIs..
    http://cvs.sourceforge.net/viewcvs.py/hermesjms/Hermes4/src/java/hermes/ext/mq/MQSeriesAdmin.java?view=markup
    Colin.
    http://hermesjms.com

  • How do I reduce the number of pixels in my photos?

    How do I reduce the number of pixels in my photos?

    Export them at a smaller size:
    File -> Export - not the options at 'Size'
    Regards
    TD

  • How can I increase the number of pixels in an image?

    How can I increase the number of pixels in an image?

    You can't.
    The number of pixels in an image is decided by the camera that shoots the image
    With an app like Photoshop you can interpolate - this will make a guess as to what a particular pixel may look like based on the ones around it. Results can vary wildly and Photoshop is expensive.
    Regards
    TD

  • How can I export the number of pixels of each layer into an excel file?

    I would like to export the number of pixels that each layer of an image contains into excel. How can I do this?
    Secondly, as I need to do this with several images, is there any way to name the layers so that all layers with let's say for example the name "yellow" appear in the same column in excel?
    Some background information on why I need to do this... I would like to know how many percent of an image are yellow and have therefore created  layers of one image for each color it contains.
    Thanks for your help!!!

    Maybe my question was a bit unclear. I do not want to find out the number of pixels of a color in a layer but the number of pixels of the complete layer.
    What color these layers are is a different question. I am using images with a very limited range of colors (sort of like the image above but with about 10 colors). I have seperated these colors into layers and now need to count the pixels of each layer and export them.
    You can record number of pixels/layer  into the Measurement Log, then export data to Excel. But I'm not sure how to automate that without scripting.
    Does anyone know how to do this?
    For normal artLayers it is somewhat easy to get the number of pixels in the layer. But that is just how many pixels are in the layer.
    But that is exactly what I need to know, how many pixels are in the layer. I know how to find this out by looking at the histogram of the selection. But I want to export this information of all layers at once into an excel or text file. Any ideas on how to automate this with or without scripting?
    |

  • How can I find the number of megabytes per seconde of mij connection with internet

    In a tuning program is asked the number of MB per second of mij lan-connection with internet.
    I should like to know how I can find that number.

    Hey Tongo,
    This isn't really a Firefox question. I would suggest doing a quick Google search for "Internet Speed Test" or something of that nature. I know a very popular one is located here: http://www.speakeasy.net/speedtest/
    Hopefully this helps!

  • How do I find the number of users logged on another server?

    I'm trying to ping other servers and find the number of users logged on that server. Any leads?

    Do you need maybe something like this?
    FINGER(1) UNIX Reference Manual
    NAME
    finger - user information lookup program
    SYNOPSIS
    finger [-lmMspho] [user ...] [user@host ...]
    DESCRIPTION
    The finger utility displays information about the system users.

  • How do I reduce the number of pixels in a JPG so I can email it?

    I am unable to reduce the number of pixels in a JPG so I can email it
    == This happened ==
    Every time Firefox opened
    == 2 days ago

    If you do not have an image editor that allows to do that then use one of the online sites to resize images.
    * http://www.shrinkpictures.com/
    * http://www.picresize.com/

  • How do I find the number of instances of a text entry?

    Hello,
    I have a spreadsheet and the cells have either a text entry or numerical entry.
    I am trying to work out how to write a formula to total the number of cells which have a particular text entry.
    Any help would be apprectiated. Thank you.

    =COUNTIF(test-array, condition)
    'test-array' is the range of cells you want to test
    'condition' must be expressed as a text string. To find the count of "example text" on the table named "Data", you could use either of the formulas below (on a separate table). Both counts are of 'all columns of "Data"'. The counts include items in the Header column (Column 1 of Data), but do NOT include items in the Header row (Row 1).
    In the single cell table, "Count 1" the search text is stated as a literal in the formula:
    =COUNTIF(Data :: $A:$D, "=example text")
    In the two cell table, the search text (other text), is set in the top cell, A1, and that cell is referenced in the formula in A2:
    =COUNTIF(Data :: $A:$D, "="&A1)
    Note that because of the omission of Header row cells, the formulas could be placed in a Header Row cell on the main table ("Data"), with the search value also placed in a Header row cell on that table. The formulas in this case would not include the "Data::" part of the 'test-array' argument.
    Regards,
    Barry

  • Can't find email with serial number for Pages, how can I find the number?

    Purchased Pages on 9th September following iWork09 trial, however I must have trashed the email containing serial number
    in error. Does anyone know how to find the serial number. Thanks in advance for any reply...

    You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • How do I find the number of file descriptors in use by the system?

    Hey folks,
    I am trying to figure out how many file descriptors my Leopard system has in use. On FreeBSD, this is exposed via sysctl at the OID kern.open_files (or something close to that, can't recall exactly what the name is). I do see that OS X has kern.maxfiles, which gives the maximum number of file descriptors the system can have open, but I don't see a sysctl that tells me how many of the 12288 descriptors the kernel thinks are in use.
    There's lsof, but is that really the only way? And, I'm not even sure if I can just equate the number of lines from lsof to the number of in use descriptors. I don't think it's that easy (perhaps it is and I'm just over complicating things).
    So, anyone know where this information is?
    Thanks for your time.

    glsmith wrote:
    There's lsof, but is that really the only way? And, I'm not even sure if I can just equate the number of lines from lsof to the number of in use descriptors.
    Can't think of anything other than lsof right now. However:
    Only root can list all open files, all other users see only their own
    There is significant duplication, and
    All types of file descriptor are listed, which you may not want, so you need to consider filtering.
    As an example, the following will count all regular files opened by all users:
    sudo lsof | awk '/REG/ { print $NF }' | sort -u | wc -lIf you run it without the sudo, you get just your own open files.

  • How do i find the number of messages in a queue

    Sorry if this is too trivial, but i haven't been able to figure out how to determine the number of messages in a queue. business case being that i can only have 3 messages in the send queue, so i need to stop sending if there are 3 outstanding messages still in the send queue.
    Can someone point the way?
    Thanks,
    Nilesh

    Hi,
    To get the depth using JMS you must create a QueueBrowse and browse the entire queue. Its generally horribly inefficient if you want to do it with any regularity.
    In Hermes I have had to write plugins that open separate connections to providers using their non-JMS APIs or JMX and get that kind of information that way.
    Look at the getDepth() method in this JBoss plugin for an example that uses JMX:
    http://cvs.sourceforge.net/viewcvs.py/hermesjms/Hermes4/src/java/hermes/ext/jbossmq/JBossMQAdmin.java?view=markup
    And here is one for WebSphereMQ that uses one of its many APIs..
    http://cvs.sourceforge.net/viewcvs.py/hermesjms/Hermes4/src/java/hermes/ext/mq/MQSeriesAdmin.java?view=markup
    Colin.
    http://hermesjms.com

Maybe you are looking for