How do I find the Report ID?

I need the report ID or Workbook ID to manually enter it through the profile generator. How and where do I find it? Please reply ASAP. Thanks in advance. Points will be awarded.

Hi MD,
   Gupta is right. The tab in a workbook can give you the query ID and also the workbook ID.
   I guess you need a lot of IDs for mass of queries. Thus you can also go to SE16 and look at table RSZCOMPDIR. You can get IDs for all the queries.
   Hope this helps.
Regars,
Aaron

Similar Messages

How do I find the report server name, and then run paper report from forms?

How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.

Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank

How can I find the source of report in the executable method= "Spawned" ?

Dear all:
how can I find the source of report in the executable method=>"Spawned" ?
Regards,

Hi,
Please see this thread.
To View Spawned Concurrent Program Source Code
To View Spawned Concurrent Program Source Code
Regards,
Hussein

How to find the reports/Txs that are affected by changes made in NA30

Hi All,
Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
Many thanks & Regards,
Vijaya

No idea about any such report but from SAP help got following list of billing reports. It might be helpful
RNAABGR0 IS-H: Revenue Accrual
RNAABRKZ IS-H: Change Billing Indicator of a Case
RNABD000 IS-H: Patient Billing
RNABILB0   IS-H: Change Billing Block via Conditions
RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
RNADIN03   IS-H: Billing Document Mass Print Program
RNAFSPER IS-H: Change Billing Block
RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
RNASED00 IS-H: Delete Case Selections
RNASEK00 IS-H: Copy Case Selection
RNASELM0 IS-H: Billing - Process Messages
RNASEL00 IS-H: Case Selection
RNASEL01 IS-H: Case Selection via Outpatient Visits
RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
RNASTO04 IS-H: Cancel Provisional Invoice
RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
RNAENT00 IS-H: Billing Status of Inpatient Cases
RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

My iPod was just stolen. How do I find the Serial number so I can report it to the police?

Hello!
My iPod was just stolen. How can I find the Serial number?

See this article for information on where you can find your iPod's serial #.
http://support.apple.com/kb/ht1459
B-rock

How can I find the serial number for my stolen iPad that's associated with my apple ID ?

How can I find the serial number for my stolen iPad that's associated with my apple ID ?

If you registered it with Apple check your registered items at Your Support Profile for Registered Purchases. Also, see iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

How do i find the model number on my macbook?

how do i find the model number on my macbook?

Click the Apple at the top left and select More Info or System Report depending n which version of OS X you're running. Select and copy the serial number and paste it here http://www.everymac.com/ultimate-mac-lookup/ and you'll find complete specs for your MacBook.

How do I find the UDID of my MacBook Pro?

How do I find the UDID for my MacBookPro? At one time it was supposed to be available from iTunes but I can't find it now.

Click  in the menu bar.
About This Mac > More Info.. > System Report > Hardware > Hardware Overview > Serial Number(System)
Underneath you will find Hardware UUID:
Mac equivalent od UDID is UUID.

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can we generate the report of backup,tablesapcefrom OEM / RMAN

How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...
2.)How can we generate the Backup status report also

user13584223 wrote:
How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...There are DBA_* views that expose the necessary information. They are documented in the Reference Manual.
2.)How can we generate the Backup status report alsoThere are rman commands that give that. They are documented in the Backup and Recovery User's Guide.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

HT1267 How do I find the owner of an iphone I have found But there is no contacts or Cell number of the phone that is the phones cell number and the phone has been suspended and you can't get any information on returning it .

How can I find the owner of a found phone that must have been reported stolen but all you want to do is find out who the person is that owns the phone. But you have no idea who the person is who stole the phone in the first place but now you only want to give it back to its rightful owner.

I found a iPhone 5s, and I'm willing to return to the owner ASAP, but it seems that "he" have not turned on "Find my iPhone".
Could anyone help me get in touch with the owner, that was probably here for the 2014's World Cup?
I'm a Brazilian Apple user, and got stolen 6 months ago. I'm fully aware of what it is. Please, don't flood me with the obvious. The law here DOES NOT WORK.
This owner must get it back, even if I must send it overseas.
Thank you for the support.
<Edited by Host>

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.
Also if i cant locate them can i at least remotely delete the libraries, and lock them so they are unusable to the thiefs, and i had a sony laptop worth £2000 stolen which I had used my apple account for a year is there anyway i can track that or retrieve the contents and delete them?
Please if anybody knows reply or contact me!!!! =-)
many thanks

You or Apple can do nothing to prevent use of the devices.
For the iPod touch if you turned on the FindMyiPod feature and wifi is on and connected yu may be ablt ot locate it and wipe it by going to iCloud, signing in and going to FindMyiPhone. However, if the iPOd is rectored that feature is deleted.
Report to police and change the passwords for all accounts used on the iPod.

CRVS2010 Beta - Unable to find the report in the manifest resources

I upgraded to VS2010 Beta where we soon encountered this error.
Unable to find the report in the manifest resources. Please build the project, and try again.
at CrystalDecisions.CrystalReports.Engine.EngineExceptionUtils.DoThrowException(String message, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ExceptionThrower.ThrowEngineException(String messageID, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(IEnumerable enumerable)
Searching the forums I saw some similar issues. Here is how the issue was solved on my end.
Looking at the properties of the crystal report file in VS2010 the Build Action was "None". After setting it compile things worked as normal. The exception made sense after finding the cause.
I'm not sure if this was caused by VS2010 as my organization was in the middle of migrating to TFS 2010 that may have caused an issue.
Hope this helps someone.

Cliff, thank you very much for sharing this soution with the community. Once CRVS2010 RTMs, I'll create a KBase on it.
Happy coding,
Ludek

If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
They are not listed as devices on the itunes store account...

Hi BradSLane,
Thanks for using Apple Support Communities. This article has one method to find your serial number:
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
Go to My Support Profile*.
Sign in with your Apple ID.
View your purchases in "My Products".
* Currently available only in certain languages.
Note: If you need help remembering your Apple ID(s), go here.
Take care,
- Ari

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

How do I find the Report ID?

Similar Messages

Maybe you are looking for