How do I find the users connected via afptcp

I want to find the list of users connected to an OES2 Linux server.

Originally Posted by ataubman
Start with the documentation Novell Documentation . If you have further issues, please start your own fresh thread with full problem and system details, as your problem has nothing to do with the OP's.
I've already looked at the documentation and have another thread going, I'm just looking for any info from any source. That source may be watching this thread and not the other.

Similar Messages

  • How can I find the USer Exit...

    Hi,
    How can I find the USer Exit...
    I need to do changes for this User Exit :EXIT_SAPLKEII_002
    In which T-code I can open this Exit
    Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
    ...any sugesstions will be apprecaited!
    Thanks & Regards,
    Kittu

    Hi,
        the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
    Regards,
    Vijaya Lakshmi.T

  • How to switch off the internet connection via GPRS by iphone 3G

    how to switch off the internet connection via GPRS by iphone 3G?
    need help.
    thanks

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How do I find the current connections?

    I've noticed that the disk doesn't always spin down after using my media player (OSMC on a Raspberry Pi) to access my My Cloud, and I'd like to debug this. First, I need to see if there's a persistent connection by checking the connection status at the My Cloud command line.  Googling tells me that you use the "smbstatus" command for this -- and there's my first stumbling block. That command is not present because it's in the "samba" package, which I am surprised to find is not installed by default.  # apt-cache policy samba
    samba:
    Installed: (none)
    Candidate: 2:4.1.17+dfsg-2
    Version table:
    2:4.1.17+dfsg-2 0
    500 http://ftp.us.debian.org/debian/ jessie/main armhf Packages I could install the "samba" package with "apt-get install samba". Is that safe to do on the My Cloud? The My Cloud is all about providing samba shares and yet the "samba" package is not installed. I was wondering if it was not installed for a reason. Installing it won't trash the My Cloud's normal services? Or is there a better way to find the current connections -- one that doesn't need the "smbstatus" command?

    Hi and welcome to the WD community.
    I have not tried this, lets see if another user can share some tips and information on this matter.

  • How can I find the user that created a user account and the user who last updated the account

    How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
    I am using ADO commands and vbscript
    ug3j

    I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
    modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
    the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
    Richard Mueller - MVP Directory Services

  • How can i find the user of a process

    Hi all,
    i have a production database Oracle 10gR2 on HP-Ux OS.
    when i see the top, i find a long running process, which is runnning for more than 7000 Mins.
    when i shutdown immediate the database, it is not closing due to the above process. and this problem is coming for the last two weeks. as such i has to shutdown abort for closing the database.
    how can i see what process is running and who is runnig the process? and why the process is not closing? as other processes are closing when shutdown.
    pls reply me.
    thanks and regards.

    Use the V$PROCESS table and join it to V$SESSION, use the OS process ID for the V$PROCESS.SPID value.
    select a.username, a.osuser, a.program, a.sql_id, b.spid
    from v$session a, v$process b
    where b.spid = &OS_PROCESS_ID
    and a.paddr = b.addr
    -- to see the SQL execution plan
    set linesize 1000
    select * from table(dbms_xplan.display_cursor('&SQL_ID'))
    /(disclaimer: SQL above untested).

  • How to find the user-exit for transaction fpp2

    Hi experts,
    could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

    Hi,
    Use the following program to find user exits of specified code.
    *& Tables
    TABLES : tstc,     "SAP® Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP® Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP® Modifications
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    I executed the above program but there are no user exits for the specified Transaction.
    Thanks,
    Naveen Kumar.

  • How can i change the user that open the rfc connection (sm58) from R/3?

    Hi all,
    i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
    I hope i've been clear...
    thanks for the help
    S.

    Hi...
    Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC  and you can buid the error message with this parameter and identify the user of execution...
    I hope this helps you
    Regards

  • On the Canon MG3520 connected via Ethernet to USB on my PC with Windows 7, How do i find the IP ADD

    ON THE CANON mg3520 CONNECTED to my PC via cable to Computer with Windows 7, How do i find the IP ADDRESS for the MG3520?

    Hi biggergulp,
    To view the IP addres of your PIXMA MG3520, please follow these steps:
     1.  Click Start and select All programs, Canon Utilities, IJ Network Tool, and then IJ Network Tool.
     2.  Click on your PIXMA MG3520.
     3.  Select Configuration... from the Settings menu.
    The IP address of your PIXMA MG3520 will be displayed.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to find the User who changed the connection settings

    Hi Gurus,
    I am basically a BW guy but i am looking at your precious Guidance in this issue.
    We have a situation in our BW production system. The job loads are working fine till now but seems like someone has meddled with RFC connection with R/3 prod.
    The connection between R/3 and BW is broken. I would like to know if there is any way to find the User or some Log to find who might have medelled with the RFC's .
    Help is greatly appreciated.
    Regards
    satish M

    Hello Satish,
    Which release are you on?
    Option 1: Take a look in SM59 selecting the destination and there is a "last changed" information displayed.
    Option 2: the table for these connections are often not logged for table change logging, but if they are... then try transaction SCU3 on the backend tables (table RFCDES is a good start).
    (search for rec/client and recclient etc as search terms).
    Option 3: Why would someone change a connection? Try to analyze what happened during the time period after the change, or even immediately before the change (audit logs, system events, server statistics etc). A simple check would be via SM20 to see who started SM59 immediately prior to this. A more complex check would be analyzing the RFC profiles in ST03N.
    Option 4: On the R/3 side, you might be able to find the same auditable information as well (perhaps even the IP address of the caller?) Tip: The person might have created a dump... => transaction ST22.
    Option 5: There are some other additional logging, tracing and control possibilities at a deeper technical level, if used or active at that point in time.
    Cheers,
    Julius

  • To find the user processes that are connected to a database currently ??

    Hi,
    I wish to find the user processes that are connected to a database currently.
    How to find this ?
    any specific table/view for this ??
    Thanks.

    Hi..
    You can use
    SELECT NVL(s.username, '(oracle)') AS username,
    s.osuser,
    s.sid,
    s.serial#,
    p.spid,
    s.status,
    s.module,
    s.machine,
    s.program,
    TO_CHAR(s.logon_Time,'DD-MON-YYYY HH24:MI:SS') AS logon_time
    FROM v$session s,
    v$process p
    WHERE s.paddr = p.addr
    ORDER BY s.username, s.osuser;
    HTH
    Anand

  • Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

    Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

    You can't do that.
    And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

  • How do I find the number of users returned by a cfldap query?

    How do I find the number of users returned by a cfldap query?
    I'm not allowed to do something like:
    <cfif ArrayLen(results.rows) gt 1>
    I then get an error:
    faultCode:Server.Processing faultString:'Unable to invoke CFC - Object of type class coldfusion.tagext.net.LdapResultTable cannot be used as an array' faultDetail:''
    Many thanks for any light you can shed

       Cheers again Ian for your many helps,
    it now won't let me do
    <cfqueryparam value="#results.USNCreated#" cfsqltype="cf_sql_varchar">
    I get the message:
    faultCode:Server.Processing faultString:'Unable to invoke CFC - Error Executing Database Query.' faultDetail:'[Macromedia][SQLServer JDBC Driver][SQLServer]The name "results.USNCreated" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.'

  • How to find the user who has changed a field in a table

    Hello
        Someone has changed a field  cost center in my table so i need to find the user who hav changed it.Can anyone tel me how to find it.
    Regards

    HI ,
    Create a Z test program using the particular table and filed .
    Now goto SE38 and execute the program " RSDEPEND "
    give the ur test program and then execute . u will get the list of the last  change of ur program
    ( table and fields used inthis program)
    Another way :
    for data element :
    refer table 
      DD04L and get the user name
    for domain
    DD01L
    Edited by: shambhu sharan pandey on Nov 13, 2009 5:49 AM

  • How to find the user exit for order cancellation

    I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
    I have got a Zreport where this order should not come as open order item.
    Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
    In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
    My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
    Regards.

    hi
    pls tell me t.code so that i will send all user exits related to that particular t.codes
    Thanks & Regards
    phaneendra

Maybe you are looking for