How Do I Find Where My Beehive Conference Is?

Hello,
I am using Beehive Conferencing, version 2.0.1.7.0, I just recorded my first conference with a customer.
But now, I cannot locate where that conference is stored.
I have checked under C:\Documents and Settings\auahmed2\Application Date\Oracle\Beehive, there are no asp files here.
I use MS Outlook, it is installed with Outlook Extensions for Beehive.
I looked under the folder Documents, and there are no files here either.
Your help is appreciated.
Anees.

Hi Aness,
The default location is "Your Personal Workspace > Documents". This will be shown in the "Recording Location" when you start the recording and users can change the location. If you cannot find it in "Documents", then you might have chosen another location. Try recording another conf and check the "Recording Location"
Thanks,
Jereen

Similar Messages

  • I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it?
    If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

  • I've "successfully" installed the latest version of Flash Player. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon in the trash now? (I am on a Mac) Thank you!

    I've "successfully" installed the latest version of Flash Player, as recommended by Firefox. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon that appears on my desktop, in the trash now? I am on a Mac and I am not technically inclined.
    Thank you!

    Your list of plugins shows that you have installed Flash 10.2 r152 which is the current release version.
    You can also confirm that Flash is installed by visiting this link - http://www.adobe.com/software/flash/about

  • TS4006 How do you find where your Iphone was last located before powering off?

    How do you find where your Iphone was last located before powering off?

    Hi Mr. Wayans,
    Here is a support article with the information you are looking for:
    http://support.apple.com/kb/PH2698
    Cheers,
    GB

  • How do i find where itunes is pulling my feed from?

    How do I find where Itunes is pulling my feed from?
    I made some changes and I need to see if they are using the same feed.
    Thanks for any help
    https://itunes.apple.com/us/podcast/calvary-chapel-myrtle-beach/id117554166?mt=2

    In the podcast library of iTunes on your computer - find your show if you are already subscribed to it and right click and delete it from your Podcast library - do not unsubscribe - DELETE it. 
    Then go into the iTunes store for your show and click subscribe.
    This will ensure you are subscribing with Apple now sees as your feed.
    Go back to the library section of iTunes and the podcast sub-section and find your podcast.
    Then right click on the title and select - Copy Podcast URL.
    In your case you will see it is - http://www.ccmyrtlebeach.com/podcast/podcast.xml
    As the feed iTunes has for your show in their data base and all new subscribers will get when they click subscribe.
    Rob W
    podCast411

  • I lost my iphone5, how can I find where is my phone

    I lost my iphone 5 in london last night. I worry about it might be stolen. How can I find where it is. Who can help me, please

    You are the only one that can help. You will need to have enabled Find my iPhone. If you did, go to http://icloud.com.

  • How do I find where the Apache home directory is?

    I am working with a server on which someone else installed Apache. In fact, they have both Apache 1.3 and Apache 2.0 on it. Only Apache 2.0 is active. I don't know what they used to install it or where Apache came from. The people who installed it cannot be reached.
    How do I find out which directory is Apache_home?
    At first I tried looking for files and directory names that I thought would show up in the Apache_home directory tree:
    Tried 'locate apache' in root, and got dozens of directories or files with the word "apache" in them.
    Tried 'locate httpd.conf', and got two listings (etc/httpd/conf/httpd.conf and usr/lib/opcenter/fastcgi/httpd.conf). One might be for each of the Apache versions?.. but which is which?? Are either of them under the "apache_home" directory??
    Tried 'locate libexec' (one of the directories Im need to find) and got user/libexec and user/local/libexec.
    Is there a configuration file or something that has a statement like "$Apache2.0_home=XXX/XXX/XX" that would tell me where it is??
    Thanks in advance.

    No, Apache _home is a sort of the base directory for
    the apache installation. According to some literature I read today, this directory should've been /usr/local/apache/bin/, but that's not where I found my apache install (cygwin, I let the installer handle all the defaults).
    Mine was under /usr/sbin/, and to be correct I was looking for the httpd.exe (cygwin specific) file.
    I'd suggest running a find / -name (file you are looking for) to locate your resources.

  • How do I find where the master file for a version in aperture 3

    I was wondering how to find where the original master image is in the aperture 3 library. For instance we have several images that are in different albums and folders but are trying to find where the original image is in the library.

    Is your Library managed or referenced?
    If your library is referenced, then you can reveal the master image file by selecting the image in the browser and selecting "File -> Show in Finder" from the menu.
    If your library is managed you will have to open the Library package to see the master image files: Ctrl-click the Aperture library and select "Show Package Contents" from the Pop-up menu. Then browse the folder "Masters", but very carefully - don't change anything inside the package! The Masters-folder is arranged by date: year, month, day ...
    But you can always look at the master image files from inside Aperture - much safer: Select any image and type "m" - that will show you what the master image file is like - type "m" again to view the version.
    Regards
    Léonie

  • How do I find where a Procedure is used ?

    I have a stored procedure, not a part of a form or report. I need to find where in my system this is used. Is there a utility that will do this ??
    Thanks

    I guess DBA_DEPENDENCIES should be able to help you.
    How to map package call hierarchy

  • How do i find where 2 best fit lines cross?

    Hi
    I was wondering if anyone knows a way to find where 2 best fit lines cross, I don't have the equation for the lines and i'm not sure if I can get it.
    I currently have the program tracing the lines and comparing y values however it will only increment in steps of 0.1 on the x-axis and i need an accuraccy of 0.0001

    If you have or can get a series of XY value pairs for both of the lines, getting the equation of the line is as simple as calling Linear Fit.vi.  Once you have the equations of both lines, the intersection is simple algebra, subject to the accuracy of your fit.  If the XY data pairs describe a curve, not a line, and you want more accuracy, you can try a polynomial fit using General Polynomial Fit.vi.  To find the intersection, set one polynomial equation equal to the other, compute the coefficients of the resulting polynomial equation, and find the root using Polynomial Roots.vi.  All this assumes you have a Pro or better version of LabVIEW.  If you don't, you can still do it, but you will need to write some code for the fits and roots.  Check out a copy of Numerical Recipes in C, by Press et. al. from your local library and it will give you the equations for all the above.  With LabVIEW's native matrix handling capabilities, the rest is straighforward.
    Let us know if you need more help.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • How do I find where a Pick Whip Link goes

    I've long ago created a bunch of pick whip relationships in a project, and can no longer find where the links go.
    If I look at the code it says
    content("Ellipse 1").transform.scale
    But I have about 100 Ellipses in this project.  And have no idea which one it is.
    Is there anyway to back track through the connection?

    The expression must be written something like this:
    thisComp.layer("Shape Layer 1").content("Ellipse 1").transform.scale
    That tells you which comp and which layer Ellipse 1 is in.
    An expression that just says content("Ellipse 1").transform.scale will throw an error.
    If you have a zillion Elippse shapes in that layer then they should be in numerical order unless you renamed them. Just go to the layer named and then go to the bottom of the Elipse Layers. If the Ellipse is nested inside another ellipse then the same thing appies. Unless you renamed the layers there is only one Ellipse 1 in a shape layer that has a transform.scale property. Elipses nested inside elipses do not have transform properties. Only size and position.
    If you have a zillion layers with the same name and you don't know which ones have an Ellipse then use CS6's search feature by deselecting everything in the timeline and then typing in Ellipse. Only layers with Ellipse in them will show up.

  • How can I find where a specific font is used in a Pages document

    I have a Pages document that always shows a font missing error when opened. Is there any way to find where that font is supposedly used? Alternatively, if I install the font, the message doesn't appear — I assume that means that the font was found. Is there a way to find where that font is used in the document?

    Hi Bob.
    For the present, at least, it's going to involve a visual inspection.
    When you open the document, you can select a specific font in the Document Warning window, and replace it with another, using the Replace Font pop-up at the bottom of the window.
    Choose a font that will be easy to spot, such as Wingdings, used below to replace Cambria:
    At this point, you could replace the occurrences individually with a suitable font, or press command-Z to undo the replacement, or discard the Pages version of the document and open the original a second time to produce a new Pages document.
    For the future, you use Provide Pages Feedback. in the Application menu (in Pages, the "Pages" menu) to send a feature request to Apple. The link will also take you to the Feedback page.
    Regards,
    Barry

  • How do I find where a sub vi is used?

    I have a sub vi and I cannot find where it's called. I tried the "find all instances" but it does not show up in the search. I need a "where used" function!
    PaulG.
    "I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

    One way is to browse the vi hierarchy. THis is done by opening your top level vi and selecting the browse toolbar item and selecting browse vi hierarchy. This will show you a hierarchial view of your applications. This will show you all of the linkages to the subvi that you are looking for. The other way is to use the find option. This can be done by selecting Ctrl-F. This will allow you to search for a specific vi or other objects. This will also allow the searching of text. Once you find your subvi you can select ctrl G and skip through all of the instances. Hope this helps.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor

  • I should have a credit on my iTunes to pay for a pass download. How do I find where it's at

    I should have a credit to pay fora pass purchase but don't know where to find it!!!

    As I said, some items cannot be purchased with an existing credit on an account no matter how much it is.  It can only be purchased with a charge to a credit card.

  • How do I find where a bookmark is in my folder tree?

    I use the bookmarks menu a lot, and I have created many folders to organize them. But when I use the search function, all I see are the pages I have saved, NOT where they are in the folder tree.
    Sometimes I wan to reorganize the pages differently, but I don't know where they are!

    948165 wrote:
    Hello,
    When I go to System Administrator > Concurrent > Program > Define I can lookup programs that I should be able to run. Now I want to actually run the process but I cant find figure out what responsability it is under.
    How can I go about finding this?Please see (WHOCANRUN.SQL - List Responsibilities That Can Run a Given Concurrent Program [ID 134036.1]).
    Thanks,
    Hussein

Maybe you are looking for