How do I find which 'machines' are authorised on my Mac?

I have a MacBook Pro OSX 10.5.8 and iTunes 9.2.1(5).
Apparently, I have two machines authorised on my account! How do I find which (what?) these are?
I synchronise my iPhone 3GS and iPad to the same account. It still shows my (now non existent) iPod Touch too.
So - how can I find out which 'two' are 'authorised'?
David

dsugden wrote:
Thanks for this.
The info re: iPods/iPhones clarifies one thing for me thank you. However, I don't have any recollection of authorising any other machine on my iTunes, so would still like to know how to find out which machines have become authorised.
There may not be any others! In many cases, iTunes will use up another authorization after a motherboard replacement, OS upgrade, etc, even when there is not really a new machine.
That is why it is a good idea to deauthorize a machine before doing anything significant to it, but of course that is easy to forget to do. As the gnome points out, it does not really matter until you hit 5, at which time you can simply "deauthorize all."

Similar Messages

How can I find which applications are using the most power?

I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2. Is there some way to determine which applications are using the most power?
I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds. This only happened recently. It had been well behaved and only accessing once or twice a day before. I installed the most recent iTunes upgrade, per suggestions during a Sync. The problems seemed to occur after this update. I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home. Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
In short, how can I maximize my power usage (aside from turning it off)?
Thanks.
Dave

Thanks for responding so quickly.
I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden. I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me). Now that battery only lasts about 2 to 3 days with the same use.
I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

HOW DO I FIND WHICH PLUGINS ARE NEEDED on pages that dont display?

Question
when i loginto my.t-mobile.com i get a circle of moving dots in a white screen over top of some of pages, and some pages have a moving circle like the QuickTime circle in place of the curser. i know its because ff needs a plugin or something installed but dont get info from ff as to what is needed. this site works perfect in IE8 (after IE8 loaded unknown to me which ones) some plugin.have upgraded to FF8, same problem. had same type problem on IRS free file website where pages wont show, but worked perfect in IE8. problem has to be that a plugin or addin needs to be installed but i can't get any info about which to work on.

Very few apps actually run in the background, so, if you're talking about removing apps from the recently used list, that's unlikely to have any significant affect on your data usage. You should go to Settings>General>Background App Refresh and turn off background app refresh for those apps that you don't need to have using data in the background.
You can go to Settings>Cellular and scroll down to see which apps are set to be able to use cellular data. Under each app name is the amount of data they've been using.

How do I change which PCs are authorised to play my purchased music?

I have a 12-hour flight this weekend and to keep me sane I just spent about £50 on audio books - but they won't copy into my iPod because my new pc isn't authorised to play them. How do I change the authorisation to this pc? My old laptop is history. Somebody please help me - I can't do a 12-hour flight without these!
[email protected]

You can authorize up to 5 computers to play the purchased content, so if you have not hit 5 yet, just authorize the computer, and then sync the iPod. If you have reached your 5 already, you can deauthorize them all. More info is here.

HT1420 how can you see which computers are authorised to an itunes account?

Having difficutly getting movies and TV programs purchased from the iTunes store to play on my Apple TV Gen 1 - they appear in the library but don't transfer onto the Apple TV Gen 1; any suggestions?

You may want to ask in ATV forum. Though first gen is so old it's becoming hard to find experts on that anymore.

How could I find which i-views/pages are being used

Hello
I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)

HI,
the user administration (UME) gives you the information about the user <-> group <-> role assignment.
When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
br,
Tobias

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

HR how to find which personal area belongs to which country

HR
how to find which personal area belongs to which country
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi,
You can use the table T001P for finding that for eg.,
<b>Select molga from t001p where werks = 'Your Personnel area code'.</b>
Thanks
Yogesh

How to use dvb to find which blocks are corrupted?

hi
how to use dvb to find which blocks are corrupted?
and how to repair it from two days back user managed back up when database is in no archive log mode?
rgrds
Edited by: new2appsdba on Jul 30, 2010 9:50 PM

Hi,
Please see these documents.
Note: 434013.1 - HOW TO TROUBLESHOOT AND RESOLVE an ORA-1110
Note: 352907.1 - Script To Run DBV On All Datafiles Of the Database
Note: 836658.1 - Identify the corruption extension using RMAN/DBV/ANALYZE etc
Note: 35512.1 - DBVERIFY - Database file Verification Utility (7.3.2 - 10.2)
Note: 403747.1 - FAQ: Physical Corruption
Note: 28814.1 - Handling Oracle Block Corruptions in Oracle7/8/8i/9i/10g/11g
Thanks,
Hussein

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

HT1420 How do I find what computers are tied to my account?

How do I find what computers are tied to my account?

Welcome to the Apple Community.
Tied in what way. If you are referring to authorised computers, there isn't a way to see a list. If you are referring to computers and devices associated with your account, you can see a list in your iTunes account settings on your computer.

How can I know which photos are in the library was used in each album I have created before.

How can I know which photos are in the library was used in each album I have created before?
I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
Is there any method to find this?
Thanks.

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

I know some of my photos have NOT been imported in to the iPhoto library. How can I find which ones?

In error, for a period, I had iPhoto set up such that photos were not imported into the iPhoto library but left scattered around my iMac. How can I find which ones without selecting each individual photo - there are nearly 9,000?

Are you able to view them in full size in the library, i.e. don't get this
when you try to view the photo in full size? If you can then you can do the following to consolidate all of the master image files inside the library.
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.

How do you know which fields are mandatory while uploading PO using BAPI.

How do you know which fields are mandatory while uploading PO data using BAPI. in a structure how do you know which fields are mandatory.
and also, where how do you check that, the BAPI function module is executed.
Thanks in Advance.
Naveen.

hi
hope it will help you.
Reward if help.
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE

How do i find the visible area...

Hi everyone.
I'm trying to get the size of the visible area of a JFrame, but it keeps returning 0. I use this.contantpane().getsize() . Its because I need a drawing area which occupies a certain area of the contentpane. How can I find the visible area without the toolbar and border around the frame?
Here is my code:
public class CgraphForm extends JFrame implements Runnable {
    private int h = 600; // Height of JFrame
    private int w = 800; // Width of JFrame
    private double pad; // Padding edges size [%]
    private JButton btClose = new JButton();
    private CGUI gui;
    private boolean running = true;
    public CgraphForm(CGUI _gui) {
        // Name of frame send to parent (super) which is the JFrame
        super("Temperature");
        gui = _gui; // Used to enable the applet again
        pad = 0.05 * h;
        System.out.println("GraphForm thread started");
       try {
           jbInit();
       } catch (Exception ex) {
           ex.printStackTrace();
    public void run() {
        // Interrupt makes the thread terminate proberly by ending its run method
        while (running) {
            try {
                Thread.currentThread().sleep(100);
            } catch (InterruptedException ex) {
                running = false;
    private void jbInit() throws Exception {
        setDefaultCloseOperation(DISPOSE_ON_CLOSE); // Disposes the JFrame when its closed
        this.setSize(w,h);
        this.setLocationRelativeTo(null); // Location af JFrame on screen
        this.addWindowListener(new CgraphForm_this_windowAdapter(this));
        Container contentPane = this.getContentPane();
        Dimension size = contentPane.getSize();
        System.out.println(size);
        contentPane.setLayout(new XYLayout());
        // PENDING graphSize mangler et offset paa bredden, sandsynligvis kanten af framen
        Dimension graphSize = new Dimension( (int) (w - 2 * pad),
                                             (int) (h - 0.45 * h));
        JPanel panel = new JPanel;
        contentPane.add(panel, new XYConstraints((int)pad,(int)pad,(int)graphSize.getWidth(),(int)graphSize.getHeight()));
        this.setVisible(true);
        btClose.setText("Close window");
        btClose.addActionListener(new CgraphForm_btClose_actionAdapter(this));
        contentPane.add(btClose, new XYConstraints((int)pad, 500, -1, -1));
}/lars

I need the size to draw my panel.
You shouldn't do. Your panel should be able to draw itself without knowing its size. Assuming your panel is just a plain space which you draw on, that means one of two things: either you make its rendering logic sensitive to its own size (which you can detect in the paint() method) or you can assign it a preferred size and then place it in a JScrollPane to ensure that it can always be viewed. Both of these are fairly straightforward solutions.

How do I find which 'machines' are authorised on my Mac?

Similar Messages

Maybe you are looking for