How do I fit the entire width of a page on my monitor so I don't have to scroll back and forth?
See above
That is on the tab. A tab has a maximum width because otherwise a long title would cover the full tab width.
You can make the Windows title bar visible again in the open the customize window via the 3-bar Firefox menu button (Customize is at the bottom left).<br />
There you will find the choice to have the title bar visible.
Similar Messages
-
How can I see the entire "title" of a page (now truncated)?
I see that Firefox is now truncating the "title" of web pages. I cannot see any good reason for this because the space to the right of the title is blank. I think it was done in the "do anything to make changes to Firefox" department but in this case it is not an improvement and provides the user with less information.
How can I fix the browser so I can again see the entire "title" as provided by the web page designer? I don't want to take extra steps (if any) to see it. I want it to display automatically each time.That is on the tab. A tab has a maximum width because otherwise a long title would cover the full tab width.
You can make the Windows title bar visible again in the open the customize window via the 3-bar Firefox menu button (Customize is at the bottom left).<br />
There you will find the choice to have the title bar visible. -
How do I change the email when it asks me to verify an email I don't have?
I have downloaded creative cloud and when I opened it up it asks me to verify and email I don't have and I don't know how to change it.
Change Account https://forums.adobe.com/thread/1465499 may help
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-wrong email https://forums.adobe.com/thread/1446019 -
... just upgraded to Lion from Snow Leopard. Swiping a (one) finger (left) back and (right) forth should move the pages / sites back and forward.
It does not on Firefox but does on Safari.
Please tell me how to make Firefox work.
Thank you -
Wm. PordyYou can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker -
when I open yahoo I can only see part of the site - the page is too wide to fit on my screen. I have to move the screen to the r to see the rest of it. Then I can't see the left side. Frustrating.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
---- -
file://localhost/Users/georgegalli/OFFICE/Time%20sheets/September%202013%20copy. numbers
I hope I'm asking this the right way......
Sheet "31 Day diary" is linked to sheet "Caramainco". So, no matter what job we are on, the days are always recorded to the Caramanico sheet.
Is there a formula that will recognize the job name in column B sheet 1 and link to a sheet below of the same name?This is a part of the linked sheet from one job.....( Caramanico ) notice where i had to delete days where we weren't there.
Date
George
Aaron
Mike
Wed, Aug 28, 2013
0.00
0.00
0.00
Thu, Aug 29, 2013
0.50
1.00
0.00
Fri, Aug 30, 2013
0.50
1.00
0.00
Sat, Aug 31, 2013
0.00
0.00
0.00
Sun, Sep 1, 2013
0.00
0.00
0.00
Mon, Sep 2, 2013
0.00
0.50
0.50
Tue, Sep 3, 2013
0.00
0
0
Wed, Sep 4, 2013
0.00
0
0
Thu, Sep 5, 2013
0.00
0.00
0.00
Fri, Sep 6, 2013
0.00
0.50
0.00
Sat, Sep 7, 2013
0.00
0.50
0.00
Sun, Sep 8, 2013
0.00
0.00
0.00
Mon, Sep 9, 2013
0.50
1.00
0.00
Tue, Sep 10, 2013
0.00
0.00
0.00
Wed, Sep 11, 2013
0.00
1.00
0.00
Thu, Sep 12, 2013
1.00
1.00
1.00
Fri, Sep 13, 2013
1.00
1.00
1.00
Sat, Sep 14, 2013
0.50
0.00
0.00
Sun, Sep 15, 2013
0.00
0.00
0.00
Mon, Sep 16, 2013
0.50
1.00
1.00
Tue, Sep 17, 2013
0.00
0.00
0.00
Wed, Sep 18, 2013
0.00
0.00
0.00
Thu, Sep 19, 2013
0.50
0.00
0.00
Fri, Sep 20, 2013
0
0
0
Sat, Sep 21, 2013
0
0
0
Sun, Sep 22, 2013
0
0
0
Mon, Sep 23, 2013
0
0
0
Tue, Sep 24, 2013
1.50
1.50
1.50
Wed, Sep 25, 2013
0.00
0.00
0.00
Thu, Sep 26, 2013
1.00
1.00
1.00
Fri, Sep 27, 2013
1.00
1.00
1.00
Sat, Sep 28, 2013
1.00
0.00
0.00
Sun, Sep 29, 2013
0.50
0.00
0.00
Mon, Sep 30, 2013
1.50
0.00
1.50
Tue, Oct 1, 2013
1.00
1.00
1.00
Wed, Oct 2, 2013
0.50
0.50
0.00
Thu, Oct 3, 2013
1.00
1.00
1.00
Fri, Oct 4, 2013
Sat, Oct 5, 2013
0.00
0.00
0.00
Sun, Oct 6, 2013
0.00
0.00
0.00
Mon, Oct 7, 2013
0.00
0.5
0.00
Tue, Oct 8, 2013
0.00
0.00
0.00
Wed, Oct 9, 2013
0.00
0.00
0.00
Thu, Oct 10, 2013
0.00
0.00
0.00
Fri, Oct 11, 2013
0.00
0.00
0.00
Sat, Oct 12, 2013
0.00
0.00
0.00
Sun, Oct 13, 2013
0.00 -
My question pretty much sums it up. I like to scroll with the page up/page down buttons, and it's hit or miss working with firefox lately. It will go between my previous pages that I've visited instead of scrolling down the page.
Any suggestions?When you say ''"It will go between my previous pages that I've visited"'' like clicking Back button to go to a previously browsed webpage ?? OR does your current Tab switches back/forth to previous/next tabs located in the Tab Strip(Tab bar) ??
-
How do I delete email messages so that they stop "bouncing" back and forth between my devices?
How do I delete email messages so that they stop "bouncing" back and forth between my Macbook, ipad, and iphone?
Hi ST,
The first screen shot is the left (main) screen after I moved CS6 to the right screen (second screen shot). As you can see the CS6 panels are in front of MS Word. If I click in the Word document they go behind Word. If I switch over to on the right screen the panels reappear but in front of Word again. So I either have to switch back and forth between the two screens if I want to work in CS6 or manually movee the panels over to the Right Screen. It is rather awkward to have to do that. Make sense?
Left (Main Screen)
Right Screen -
I work on Bay listing items, I have to go back and forth on sites. The new firefox dosn`t allow this. It has back arrows, but pop up asking request are very annoying, and take much more time, The older version would allow me to drop down to the previous pages..I want my old version back. This new version has a whole lotta extra unneeded crap that just takes L O N G E R to load.. It sucks..How can I restore the older version
See this thread:
https://discussions.apple.com/thread/4661473
It contains instructions for downgrading to iTunes 10 and also an explanation of how to use the new search features from tt2 if you want to try again with iTunes 11. -
How to set page margin for any site being viewed without back and forth scrolling?
Some sites and most forums, the threads cannot be read without scrolling the screen back and forth. How can these be set where all information is read without moving screen short of up or down and not side ways back and forth.
Thank you all for attempts to satisfy my needs. The last concerning my screen is 19 inches and 800 resolution. I'm very long in the tooth and if I go higher in
resolution I have to play squint the fonts are so small. Crank them up and I'm back to scrolling back and forth on the screen.
Again thanks for help but I' m not interested in spending money on newer
haha state of the art equipment just to satisfy the need of cyber space Ad
purveyors to post their wares. Graphics I can do without as well. If they want
me to see what they have to offer, then stop messing with what once worked just fine.
I still have Word where I can do with whatever I copy n paste to get done what I need. The convenience of doing so right at the site isn't a requirement as such. Being a retired Master Electronics Technician, I'm short on computer orientations but long on other kinds of smarts.
Again, Thank you all for the help.
Gizmoman -
Typically, How many back and forths with Creative Support before they acknowledge your questi
Typically, how many times does one have to go back and forth with Creative Support before they acknowledge an issue or question?
This is ridiculous.
I'm on the forth reply now.
All I want to know is if there is a?64-bit ASIO driver for the X-Fi Titanium on 64-bit Vista?
They will not answer me.
All of my testing indicates that there is not a 64-bit ASIO driver for Vista, but they will not confirm or deny.
:angry:dRe: Typically, How many back and forths with Creative Support before they acknowledge your question?U I don't know what Creative would have written if you asked SUpport these days?
I assume, they lied when they wrote this. There are several walkarounds for XFI cards
with beta drivers. In releas drivers they exclude the ASIOx64, but in beta it's included!
Creative has a very awkward marketing strategy. This was with Vista not having EAX on Audigy as
the said it is impossible. The newer X-FI was able to?do it and after a few weeks the Audigy also could-
after paying for it. The same with DolbyDigital Li've... and now with x64 ASIO. They reduce features
in cases the cheaper card had same possibilities as the more expensi've EMUs...
Shame on them. I?baught a creative Card for the 4th time (SB, SB AWE32,Audigy2, and now Titanium).
I'm going to thinking about selling it... -
How can I make an image placed in the body tag expand to the entire width of the browser?
How can I make an image placed in the body tag expand to the entire width of the browser?I
background-repeat -- best used with small image tiles.
background-gradient - Ultimate CSS Gradient Generator - ColorZilla.com
background-size:cover - Resizable Full Page Background Image
Nancy O. -
How to make web pages fit the screen width?
Some web pages don't fit the screen width and Firefox user (me) has to scroll horizontally, which is very annoying:
https://www.dropbox.com/s/kjyubp6f3z104ku/ScreenShot021.jpg
Opera user, on the other hand, just clicks on the "Fit to width" button and everything looks great again:
https://www.dropbox.com/s/hfsgl45f4d7uzgw/ScreenShot023.jpg
Is there a way to force web page text to wrap?I get EXACTALY what "SantosHaHa" posted above. (Ffox 20 Win 7 64).
Zoom doesn't help. Make things bigger or smaller, BUT THE PAGE WIDTH IS STILL CROPED!
Have had this problem for 2 years and several versions.
NOTHING seems to work.
I wander why Ffox keeps changing versions so often, with so many new problems apearing, if Netscape worked fine 15 years ago!!!! -
The entire Captivate 8 screen to too small. How do I enlarge the entire window? All icons and thumbnails are 1/4 the size they should be. Using Windows 8.1.
It looks like it is an issue between Adobe and Microsoft. (Many Adobe programs are responding this way to Windows 8 and 8.1)
I am posting this to try and get some (ANY) ideas/feedback...but to also bring it to the Captivate Community attention. I hope the Captivate Staff is aware of this issue.
Same issue -great PhotoShop screenshot Photoshop too small on windows 8.1
Photoshop CC / Windows 8.1 HiDPI / Retina scaling support
Re: Adobe suite HiDPI on Windows 8.1
Right side menu too small font size of letters in Windows 8.1 High DPI screen
Re: Photoshop CC / Windows 8.1 HiDPI / Retina scaling support
there are many many more out there......
I tried this first, it comes with Windows and changes your display properties by application: (but it didn't work)
The program above basicly edits these settings (you can get to these by right clicking on the exe application) I tried many combos, an even tried them under the "change for all users" setting.....NADA!
I have tried editing the Windows display settings: (all screen shots below are with this setting size)
The screenshot below is at 250%. It does not make any difference in the application (check out the menu bar, properties, icons....) If I go over 150% I lose dialog box space...the buttons disappear! If I keep it at 150% the words "Advanced Actions" at the top of the dialog box shrinks slightly, enough to fit the buttons in...) I showed the difference using snag it (12 pt arial compared to the appearance of the UI ~ 4 pt.) This is so hard to see! Same issue in some of the other adobe applications. (fyi...they are all up to date)
Photoshop = same problem
Dreamweaver = working fine
Flash = working fine
Premier Pro = half working....(menubar is ok but everything else is real small)
Muse = not working
Adobe Edge Code = Working fine
OOF! Well, any thoughts anyone? I appreciate any and al feedback and ideas!!! -
Make a StringItem fit the screen width
Hi,
I�m using a String Item in a Form and I�ve tried to make the Item fit the screen width by using the setPreferredSize(). But if the Text of the String Item is to long, the device still uses a second line to display the end of the text, which I don�t want.
This is how I tried to make my String Item be displayed on an unique line.
iTitleString = new StringItem("title : ","",Item.PLAIN);
int preferedWidth = this.getWidth();
iTitleString.setPreferredSize(preferedWidth,-1);
iTitleString.setText("blablablablablalblablalblalbla");
Thanks for your helpIf you mean that it should fit to the screen width by making the font smaller, then you're out of luck. You can try setting a preferred height to avoid multiple lines, but in a best case scenario it would just mean that not all of the text will be displayed.
shmoove
Maybe you are looking for
-
My problem is after installing itunes 11.4 this is now a problem The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll is the first ERROR and some error 127 reinstall can you please
-
Hi experts under FI how many areas like AR ,AP ,GL etc are present and what is the significance of these regards man
-
Server 2012 R2 Running Failover cluster role on Domain Controler
I absolutely need to have Domain controller running failover Cluster node, we have been doing it in 2008r2 and there are documents from Microsoft stating it is possible but not recommended but the document is for 2012, I am running 2012r2 I can insta
-
Hide values in URL, passing data between two webdynpro(ABAP) applications.
Hi When transferring the data between two webdynpro applications, How to hide the values in URL. Example : First application is using for login Second application is for some transactional screens. Based on first application login
-
[SOLVED] DWM Compile Errors
Hey guys, I'm new to arch linux, and newish to linux in general. I'm trying to compile dwm and keep running into the same error. I have been trying to follow the wiki entry on dwm to a T but have not had success thus far. Currently what I've done is: