How do I Fix a 403 Forbidden Error in my Calendar app on my iMac

Re my 403 problem..didn't get my whole paragraph there. It's a 403 which opens a window saying, "... Access to XXX in "My Calendar" in account iCloud is not permitted. The server responded: 403 to operation CalDavWriteEntityQueueableOperation.
How do I fix this?

First, try the simple fix: back up all data, then uncheck Calendars & Reminders in the iCloud preference pane. Check it again. Test.
If there's no change, see whether any of these fixes is applicable:
server error "access is not permitted"
ical 403 server error

Similar Messages

How can I fix this recurring network error in the Messages App?

I use the Messages app all the time at work to chat with co-workers about jobs, etc... We have it set up using our company accounts hosted by gmail. Since upgrading to Mountain Lion we have all experienced the following issue:
At the end of the day, or when I am away from my computer for meetings, or lunch, or whatever, I log out of my user account. A lot of the time I will log back in and the messages app will act as though it is fine, but it will not actually be connected. The program makes no attempt to let me know somthing is wrong unless I try to send a message and I am prompted with "Your message could not be sent. Your account “<my account name>” is not logged in." If I go into the "Buddies" window and change the status to "Available" nothing happens, and the account bar will have the lightning bolt symbol and say "Offline" If I click on the lightning bolt an error message pops up and says, "Messages lost connection to the Jabber account "<my account name>". A Network Error Occured."
The only way to solve the problem that I have found, has been to competely re-start the computer. I have tried disabling and re-enabling the account in preferances, but it still doesn't connect.

HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

403 Forbidden error calling PL/SQL Procedure from URL

I am getting a 403 Forbidden browser error when calling a PL/SQL procedure from the URL, as in this:
http://<server.port>/apex/SCHEMA.procedure_name/f?p_param1=394&p_param2=2, etc
We are upgrading from HTMLDB 2.0 to APEX 4.0.2. I do not believe the upgrade has anything to do with it, c/o the upgraded app works fine in another APE 4.0.2 environment.
The upgrade is to new machines, new DB and new app server, Oracle Web Tier, Oracle HTTP server deployment.
The dads.conf entries are fine, all standard:
Alias /i/ "/apexd01/app/oracle/product/http/Oracle_WT1/ohs/images/"
Alias /c/ "/apexd01/app/oracle/product/http/Oracle_WT1/ohs/custom_htmldb/"
<Location /pls/apexd>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString dbserver.us.com:1521:SERVER.US.COM ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apexpwd
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
</Location>
The GRANT EXECUTE ON procedure TO PUBLIC is there.
A call to the same procedure via a process in an APEX page works fine - the procedure is OK.
The call from javascript, which sets up the call from the URL, is the one that fails with the 403 Forbidden error.
The same app works fine in another APEX 4.0.2 environment, so I know it is not the JS; It has to be some configuration setting in this environment.
I do NOT have access to the app server.
I have asked that they compare the httpd.conf, and all underlying conf files, to check for differences.
In order for me to be more specific, and hopefully speed up the troubleshooting process, can anyone suggest what other settings to look at?
Thank you - Karen

Hello,
Good catch, but the difference in URL is in fact the difference in my env to theirs. My typo in not correcting my example to match the dads.conf entry of /pls/apexd. My env uses /apex/. Just saves on my typing.
As an update, I asked the DBA to double-check, and yes, the www_flow_epg_include_mod_local function IS there.
www_flow_epg_include_mod_local is an APEX function.
So now we are trying adding procedures to it. I'll let you know if it works.
My previous question remains - why would I need to do this in one env, and not another,
given that the DB GRANTs are there.
Is there a particular app server setting that wil block execution of PL/SL procedures from the URL?
My guess is, there is some difference in configuration settings for the app server, somewhere in the httpd.conf chain.
Since I do not have access to those files, I cannot do a diff myself, as I would have if I the issue was on my machine.
I am in a situation where I can suggest what to do, but that's it. I agree, it's hard to troubleshoot in this situation.
I am being asked "what setting do I need to change?" without the benefit of access to what is there,so I am doing the best I can, without diverting from my work for a deep-dive refresher session on httpd.conf settings.
So, if anyone is aware of some setting that would block execution of a PL/SQL proc from the URL, please let me know,
and of course, if adding a proc to www_flow_epg_include_mod_local works, I'll be happy. Just still curious.
Thank you - K

403 Forbidden Error while trying to access External SharePoint site in SP 2010

I am trying to access external Claims based SP site and trying to download the file from a doc library.
I am receiving the 403 Forbidden error when executing the code.
I am using SP 2010 and Client Object Model.
PFB the code I am running.
using (SPCOM.ClientContext clientContext = ClaimClientContext.GetAuthenticatedContext(siteURL))
if (clientContext != null)
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
clientContext.Load(clientContext.Web);
clientContext.ExecuteQuery();
SPCOM.Web web = clientContext.Web;
clientContext.Load(web);
clientContext.ExecuteQuery();
using (SPCOM.FileInformation fInfo = SPCOM.File.OpenBinaryDirect(clientContext, item["FileRef"].ToString()))
string fileName = (string)item["FileRef"];
fileName = string.Concat(SaveLocation, fileName.Substring(fileName.LastIndexOf("/") + 1));
//now save it
using (System.IO.FileStream outPutFile = System.IO.File.OpenWrite(fileName))
fInfo.Stream.CopyTo(outPutFile);
fInfo.Stream.Close();
I suspect the OpenBinaryDirect method ,
I am also using Cookie based authentication I guess PFB the code for that.
public static ClientContext GetAuthenticatedContext(string targetSiteUrl)
return (GetAuthenticatedContext(targetSiteUrl, 0, 0));
/// <summary>
/// This method will return a ClientContext object with the authentication cookie set.
/// The ClientContext should be disposed of as any other IDisposable
/// </summary>
/// <param name="targetSiteUrl"></param>
/// <returns></returns>
public static ClientContext GetAuthenticatedContext(string targetSiteUrl, int popUpWidth, int popUpHeight)
CookieCollection cookies = null;
cookies = ClaimClientContext.GetAuthenticatedCookies(targetSiteUrl, popUpWidth, popUpHeight);
if (cookies == null) return null;
ClientContext context = new ClientContext(targetSiteUrl);
try
context.ExecutingWebRequest += delegate(object sender, WebRequestEventArgs e)
e.WebRequestExecutor.WebRequest.CookieContainer = new CookieContainer();
foreach (Cookie cookie in cookies)
e.WebRequestExecutor.WebRequest.CookieContainer.Add(cookie);
catch
if (context != null) context.Dispose();
throw;
return context;
If anyone has an idea of why is this happening, pls help me.
Thanks,
K.V.N.PAVAN

Hi,
Please try to add following line of code before you initialize cookie container.
e.WebRequestExecutor.WebRequest.UserAgent = “Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)”;
http://razirais.wordpress.com/2011/05/19/how-to-fix-sharepoint-online-403-forbidden-error-while-downloading-files-using-client-object-model/
Or change the following line of code
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
to
clientContext.Credentials=new NetworkCredential("Username", "Passworkd", "Domain");
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

When I try to got to a website I get a message that says 403-forbidden error

this is what I get when I try to go to a website...
403 - Forbidden Error
You are not allowed to access this address.
If the error persists, please contact the website webmaster.
If you are the webmaster of this site please log in to Cpanel and check the Error Logs. You will find the exact reason for this error there.
Common reasons for this error are:
* Incorrect file/directory permissions: Below 644.
In order files to be read by the webserver, their permissions have to be equal or above 644. You can update file permissions with a FTP client or through cPanel's File Manager.
* Restrictive Apache directives inside .htaccess file.
There are two Apache directives which can cause this error - 'Deny from' and 'Options -Indexes'.
how can I fix this?

Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred

What is a 403 Forbidden error message which I get on firefox, safari and chrome. I don't know if it is the website or something with my mac though everything else works fine.

When trying to log in to crossstitch.com I get this message:
You don't have permission to access /index.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache mod_fcgid/2.3.6 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.crossstitchforum.com Port 80
I googled the error message and don't really understand what it means.
I don't know if it is the website or something else. I am not sure where to check and I don't know how to get in touch with the webmaster. If anyone can help I would appreciate it.

If it is a Firefox add-on, you may be able to disable or remove it here:
new Firefox button > Add-ons > Extensions
or
classic Tools menu > Add-ons > Extensions

Return The remote server returned an error: (403) Forbidden error for some file types

hi
am using below code to get the byte array
byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
Thanks in Advance

Hi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Solution: Apache2 personal web sharing 403 Forbidden error

Many people are puzzled about Apache 2 throwing 403 Forbidden errors when accessing the user's personal website, although the computer website works. And a lot of incorrect solutions are floating around. I decided to post some info that hopefully will clarify the issue.
As an example, my new Mac mini would run a website OK at http://192.168.0.2/ but my personal website at http://192.168.0.2/~username/ would give a 403 Forbidden error. I believe I have found out why. This is due to incorrect user-level settings that I believe were migrated from a previous OS version. I migrated from an old Power Mac G5 Quad with MacOS X 10.5 to my new Mac mini with MacOS X Lion 10.7.
The problem here is that Apache denies access to the user level Sites folder. If you create a new user on Lion, the system will create a username.conf, where username is the user's short name. But if you migrated from a previous version, this file will not exist, so Apache will not serve pages from the user's Sites folder. Some people tried to fix this by modifying httpd.conf, for example, by putting virtual hosts on the computer's main site. But that's not the right place to fix it. This should be fixed at the username.conf level. So.. look for this file with your username:
    /private/etc/apache2/users/yourusername.conf
If it does not exist, you will have to create it in a text editor, and change the owners. First get a text editor and create it, for example you could do this in pico
    sudo pico /private/etc/apache2/users/yourusername.conf
Then add this to the file and save it:
    <Directory "/Users/yourusername/Sites/">
    Options Indexes MultiViews ExecCGI
    AllowOverride AuthConfig FileInfo
    Order allow,deny
    Allow from all
    </Directory>
Be sure to hit Control-O (letter o) to write out the file then Control-X to exit the pico editor. Note that I have enabled some options, like ExecCGI to allow .cgi files to run, and Authconfig and FileInfo so some useful .htaccess methods work. You could dumb it down and say AllowOverride none like the default settings.
Once you have created the yourusername.conf file, you will have to change the ownership to system:wheel. However, oddly enough, you can't chown system, you have to chown root. So the command will look like this:
    sudo chown root:wheel /private/etc/apache2/users/yourusername.conf
You can put other directives here that will only apply to this user. Try to avoid modifying httpd.conf, it's easy to mess up globally and it can be hard to fix if you break it.

Howdy, I was having the same problem you were having, until I noticed that I had placed some incompatible File Sharing settings on my home folder. Specifically, I had placed No Access for the 'everyone' group, which is the group that Apache uses.
Thus, even though my ~/Sites folder had "public" permissions, the enclosing folder (~/) had even more restrictive permissions so Apache couldn't serve anything from it.
Check to see if you've enabled any custom File Sharing permissions on your home (or Sites) directory in the Sharing preference pane.
hth.
Message was edited by: Wesley Miyazaki [corrected OS version]

Apache: 403 Forbidden error when trying to change DocumentRoot

I am developing several websites, but I prefer to store them in a directory at the root of my hard drive (let's call it /Websites) rather than in ~/sites or /Library/WebServer/Documents. I want to be able to preview php files locally for testing purposes, but am having trouble figuring out how to give Apache access to them without temporarily moving them into ~/Sites and back every time. The Apache documentation suggests two ways which I may point to /Websites: 1) by changing DocumentRoot in httpd.conf, or 2) through symbolic links.
The problem is, either method results in a 403 forbidden error. I assured that permissions were set the same way as the files Apache can access (755 for directories, 664 for files) and tried changing ownership to root, admin... but it didn't work and I'd prefer not to have all of my site files owned by root as it makes editing difficult.
What am I doing wrong? Any suggestions?
I also tried adding the following to httpd.conf but it had no discernible effect.
<Directory "/Websites">
Options +Indexes FollowSymLinks +ExecCGI
AllowOverride AuthConfig FileInfo
Order allow,deny
Allow from all
</Directory>
Assuming it did work, would changing the "Allow from..." line to "Allow from 127.0.0.1" or "Allow from localhost" along with "deny from all" be the proper way to let me preview on the local machine without serving my test pages to the entire internet?

Did you change this to reflect new DocRoot?
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">

Getting a "403 Forbidden" error when I login ..

Hi all ... Well yesterday I did a new installation of Oracle Express Edition 11g DB, which installed fine ... I then installed OC4J, and then finally installed APEX Listener 4.1 ...
Now, when I opened 127.0.0.1:8888/apex/listenerAdmin for the very first time .. I saw a page where I was to configure the connection .. At that point I was unable to get the 'Basic' connection working (I think the error was that the Listener was unable at connect to the database), and so I closed down that page ..
Now, one day later, when I open 127.0.0.1:8888/apex/listenerAdmin, I am asked for some login details ... I don't know what to put here to login .. In fact I have not successfully logged in here even once ..
However, some clues are as follows: Before installing APEX Listener, I defined some new roles and users from the OC4J web interface ... If I try logging in through any of these, I get the '403 Forbidden' error ... Otherwise, if I enter any other random login details, the same login box keeps popping up ..
So anyone know whats the problem here ? ... I suspect that no connect between APEX Listener and the Oracle DB is yet defined, which is why these problems are occuring ...
I tried 'undeploying' APEX listener from the OC4J web interface, and then again 'deploying' it, but the exact same thing is happening ..
Can anyone help me out here ?
EDIT:
I assume maybe I'm supposed to use the APEX_PUBLIC_USER account, which I configured in oracle before installing APEX (as per intructions in Oracle installation guides), but even when I try logging in through APEX_PUBLIC_USER, my login details are not accepted ... Also, I AM able to login into Oracle Database using APEX_PUBLIC_USER, but not in APEX Listener ... And since unlike what I described above, when I enter my APEX_PUBLIC_USER login details, the same login prompt keeps reappearing, meaning the login is not recognised at all ...
Edited by: user7366837 on Sep 9, 2011 3:39 AM

Hi,
Now, when I opened 127.0.0.1:8888/apex/listenerAdmin for the very first time .. I saw a page where I was to configure the connection .. At that point I was unable to get the 'Basic' connection working (I think the error was that the >Listener was unable at connect to the database), and so I closed down that page ..I think the page you actually opened was http://127.0.0.1:8888/apex/listenerConfigure . At least, this is the page for the initial configuration. You can call it again until you've configured the database successful for the first time.
Now, one day later, when I open 127.0.0.1:8888/apex/listenerAdmin, I am asked for some login details ... I don't know what to put here to login .. In fact I have not successfully logged in here even once ..The admin page needs the credentials you've configured on your OC4J.
However, some clues are as follows: Before installing APEX Listener, I defined some new roles and users from the OC4J web interface ... If I try logging in through any of these, I get the '403 Forbidden' error ...... which you seem to have done, but probably you've some typo in there. Please note that you have to use the exact role names as described in the installation manual. A common problem is that users don't care about case sensitivity... This would fit to the symptom: You have a correct username/password combination, so the basic authentication is done, but the user is not authorized to call listenerAdmin because he doesn't have the appropriate role.
-Udo

403 Forbidden Error on directory but not on index page.

I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
httpd.conf
condensed:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin [email protected]
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/extra/owncloud.conf
With Comments:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
## vhosts
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Include conf/extra/owncloud.conf
##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
$ ls -al /srv/http/
total 16876
drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
-rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
-rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
-rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
-rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
# groups http
wheel http
Last edited by johan1391 (2015-03-07 04:11:12)

/var/log/httpd/owncloud-error.log
192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
$ ls -al /usr/share/webapps/
drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
Last edited by johan1391 (2015-03-07 19:03:19)

How Can I Fix A QuickTime Codec Error?

How Can I Fix A QuickTime Codec Error?
I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
If I click on the Thumbnail Preview "It" runs.
How can I fix this?
TOP image is the Error message.
BOTTOM image is the Thumbnail Preview info.
I've checked out "Tell Me More" and have not found a solution.

How Can I Fix A QuickTime Codec Error?
The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
or here in the "Format" entry...
Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
use a third-party media player that will open the file, or
use a dedicated media information utility to learn this information....
Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
If I click on the Thumbnail Preview "It" runs.
f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
In short, there are several possibilities here and not enough specific information.

403 forbidden error received at Trade Partner side while sending data to XI

Hi XI Experts,
We have a B2B scenario from TP1 to another TP2 via XI in our production system. The interface is working fine and messages are flowing successfully. However, the Trade Partner HUB has decided to implement a new eCommerce Business Platform at their end. That's why they have provided AS2 ID of sender and Receiver to us to make the changes in Quality environment. I have done the same in our Quality system.
Flow: We are able to send the data successfully to the AS2 ID provided by Hubgroup. Where as we are not able to receive any data from HUB.
Last Friday, Hubgroup has received the error while sending data to XI. And in our Sender AS2 channel, we also received the following error.
a) HUB Side error:
                          Here is a copy of the MDN Message send to HUB:
                         The message you sent on "Thu, 14 Oct 2010 07:14:51 GMT" from "XXXXXXXX" to
                        "XXXXXXXXX" with subject "Integrator Message" has been received on 14 Oct
                         2010 19:14:52 GMT, but cannot be processed because message authentication
                         failed.
b) XI AS2 channel error:
                         Error type: PANIC >> Error date: 10/14/10 11:48 AM >> Description: Initiate
                         Error:com.seeburger.util.configuration.ConfigurationException: Failed to lookup report channel for failed inbound
                         message. Reason : com.seeburger.xi.config.ConfigException: No matching inbound binding (report) found for
                         FromParty: ToParty: subject:Integrator Message [10/14/10 11:48 AM]
                  I have done the following things: 1) Cache refreshed 2) Recreated the 1st part from HUB to XI. 3) Checked the Agreements and Receiver Determination and also the AS2 ID's 4) Also checked the URL in communication channel. I have created the scenario with out any mapping. I want to receive the data from HUBGROUP with out any changes. For that, I will be using a dummy interface and dummy namespace in configuration.
When we test last night, HUB side they have received 403 forbidden error message and we didn;t receive any message to XI.
Note: XI3.0 version we are using currently. We are upgrading to PI 7.11 in the next month.
Please help me on this.
Thanks & Regards,
Abdullah Shaik.
Edited by: Abdullah Shaik on Oct 20, 2010 9:06 AM

Hi Abdullah ,
here are a few things that you can check:
1) Message authentication failed
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
2) Partner received HTTP Error 403 u201Cforbiddenu201D.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
regards,
Daniel

How do I fix the iTunes system error 7 windows error 126?

How do I fix the iTunes system error 7 windows error 126?

Sorry to hear about that
Certainly hope this assists you:
≈≈≈≈≈≈≈≈
https://discussions.apple.com/docs/DOC-6562
≈≈≈≈≈≈≈≈
Please do respond with results/questions.

Sender AS2 to SAP PO; 403 forbidden error

Hello Experts,
I am using the AS2 adapter from the B2B Addon.
I am stuck in the scenario Sender AS2 -> SAP PO; with the 403 forbidden error.
Few queries;
1. Is virtual receiver mandatory ?
2. Is is mandatory to have party for sender and receiver. Currently I am having only Sender ( Party + Comm. Component ) and Receiver ( Comm. Component ( Partner Type = LS )).
Can you help please.
Thanks
Saurabh

Hi Harish,
Thanks for your quick response.
I have configured with the following details :
Sender Party : ABC ( 009 | GLN | 333333333 )
Sender Component : DEF
Receiver Party : PQR ( 009 | GLN | 111111111 )
Receiver Component : XYZ
Sender AS2 adapter :
Expected URL : http://10.194.35.20:8080/as2/HttpReceiver
Message ID Left : .*
Message ID Right : .*
Sender AS2 name : 333333333
Receivers AS2 name : 111111111
Expected subject : AS2 message
Partners in Mendelson :
Partner 1 :
( Local station )
1. Name : Mendelson_AS2
2. AS2 ID : 333333333
3. Email : [email protected]
MDN tab : http://<Mendelson desktop PC IP>:8080/as2/HttpReceiver
Parnter 2 :
1. Name : PQR
2. AS2 ID : 111111111
3. Email : [email protected]
Receipt URL : http://<PI-Host>:<PI-PORT>/AS2/.*
Payload subject : AS2 message
Error details :
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Transmission failed, remote AS2 server reports "Forbidden".
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: HTTP 403
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Message payload stored to

How do I Fix a 403 Forbidden Error in my Calendar app on my iMac

Similar Messages

Maybe you are looking for