How do I fix a corrupt domain?

Hi there,
Came across this last night and, whilst not the end of the world, it's inconvenient.
I just bought a 13" MBP running SL, and am wanting to use it to update my iWeb blog instead of the iMac G5 (leopard). I copied the "domain" file from the iMac to a USB and transferred it to the corresponding folder on the MBP. Opened iWeb - hey presto, the files were all there and looking exactly as I expected.
I created a new entry, attempted to publish, and got the dreaded "Publish error: An unknown error occurred" pop-up.
Searched the interwebz for a solution, and found one to determine if the problem was with the transferred domain file - moved the domain file on the MBP to a new folder, deleted the User/Library/Preferences/com.apple.iweb.plist file, restarted, opened iWeb, created a new site and published to a local folder etc etc). A-OK, therefore problem seems to be with the transferred domain file being corrupt
My question is - How can I fix this corrupted domain file so I can use the MBP for iWeb'ing?

Chris Wever wrote:
I tried to post a new entry on my blog (on the original Mac) and still got the publishing error. Shall I admit defeat yet?
Chris ~ Not yet. Since problems with iWeb's blog are a recurring theme on these forums, it might be useful to see whether removing the Blog page on your MBP enables you to successfully publish the rest of your site...
First make a backup of your Domain file:
_Backing up your Domain file_
...then open iWeb and delete the Blog page. Then republish your website by choosing +Publish Entire Site+ from the File menu.
NOTE: If it successfully publishes, you will have determined that the problem is indeed in the Blog page. But having removed that page from your site, you may not be able to restore ANY of your blog by restoring from your backup and republishing — because you'll probably get the error again on both Macs.
By the way, for a success story using a non-iWeb blog hosted on WordPress, see this old thread:
_To blog or not to blog_

Similar Messages

How do you fix a corrupt ipod nano 4th gen

how do you fix a corrupt ipod nano 4th gen?

Hi bigmike94610,
Welcome to the Apple Support Communities!
For iPod nano troubleshooting I would suggest the troubleshooting outlined in the following web link. I would suggest working through the steps in the order presented on the website, but you may ultimately need to restore your iPod.
Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
Best regards,
Joe

How do I fix a corrupt user profile

Hi,
I have a user profile that is corrupt. In CA, under People, Manage User Profiles, I can't find the broken user profile but when I try to create profile again with New Profile. It won't let me. As it says the Profile exists already. How do I
fix this broken profile in SharePoint 2013? Thanks.
SPYliu

I've had to use code like the above to delete user profiles before - however - I would strongly suggest excluding the loop from the above code - otherwise you'll be deleting ALL user profiles - which doesn't seem to be what you want to do
- e.g:
/* Load required Assemblies for SharePoint Server and User Profile */
[System.Reflection.Assembly]::LoadWithPartialName(“Microsoft.Office.Server”)
[System.Reflection.Assembly]::LoadWithPartialName(“Microsoft.Office.Server.UserProfiles”)
/* Central Adminstration URL or any Web Application*/
$url = "http://myserver:Port"
/* Create a new Context Object */
$contextWeb = New-Object
Microsoft.SharePoint.SPSite("http://servername");
/* Get the right Service Context */
$ServerContext = [Microsoft.Office.Server.ServerContext]::GetContext($contextWeb);
/* create a new connection to the UserProfileManager */
$UserProfileManager = New-Object
Microsoft.Office.Server.UserProfiles.UserProfileManager($ServerContext);
/* Remove Profile */ $UserProfileManager.RemoveUserProfile("CONTOSO\joesmith");

How do I fix a corrupt Finder?

Hi,
I am having problems with Finder in Yosemite 10.10.3. Here's what's happening:
1) When I go to open a folder (e.g. "applications") through finder, the finder window is blank (as if the folder were empty), when it clearly isn't. This does not happen just with "applications", it's with any folder on my mac.
2) Whenever this happens, I also notice that if I attempt to delete a file off my desktop (or anywhere in finder), there is a very long delay (several minutes) before the file is deleted (if it deletes at all).
What I've tried:
a) the quick fix is going to "force quit" and relaunching finder. This temporarily solves both of the above problems, but they immediately reoccur within a minute or two after having done this.
b) I've also tried going in to: ~/Library/Preferences/com.apple.finder.plist and deleting the .plist file. That seems to solve the problem for a day or two, but eventually I'm back to where I started. Interestingly, a couple times when I've gone in to ~/Library/Preferences/com.apple.finder.plist to delete that, I've found more than one finder.plist file there - (sometimes there are 2 or 3) - but - they always vanish within a second or two, once I'm in the preferences folder, before I can manually delete them. weird.
c) I've run disk utility and repaired permissions, as well as DiskWarrior, tried restarting, etc.
The problem with the delay in deleting stuff is instantly fixed when I try either of the two fixes above ("a" or "b") so it seems to be related to the finder problem, and both occur at the same time. I also find I can't empty trash when these problems arise, or at least that it takes several minutes to do so, even if the files in trash are only 2 or 3 small files. Again, this is fixed (temporarily) buy both solutions, either "a" or "b" above.
*** I DO NOT want to have to reinstall OS X as I view that as the "nuclear" option, and this should be fixable without having to resort to that. Yes, I have backups, but this problem exists on all.
Would love to get some suggestions on how I can fix this. What do you guy's think? ... it's the only problem I'm having on my Mac, and it's more than a little frustrating.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

How do I fix a corrupt playlist on my devices?

I've used Match on my iPhone for awhile. Now I have a playlist on the iPhone 4 that it won't play. It won't play any song. It plays songs in other playlists just fine.
When I hit play for any track in this particular playlist, the phone has the play symbol in various places, but the counter (mins, secs) stays stuck at 0. Same thing on my iPad. On my computers, it's fine.
I've turned Match off and on several times, reloading the data each time. I've turned it off, synced the iPhone directly with my Mac so that there was no music, then turned Match back on, it reloaded everything, and all the songs in that particular playlist still won't play.
Any help appreciated.

How do you fix Oxc18a0206 for 3310 all in one?

How can I fix a corrupted iPhone 4 video file?

I have a video that i recorded back in October with my iPhone 4, but for some reason now it won't play. It says "The movie could not be opened. The file is not a movie file. I have tried a bunch of different corrupted video repair software programs....i got one to convert a little bit of it (you have to pay over $100 to get the full converted video.) While the video is a nice short little video, it isn't worth $100 to have it ...however, is there another way to fix these? i know it helps to have a video that is a reference video shot around the same time, which i do. if anyone has any suggestions, i would greatly appreciate it.

The name of the software i used to fix it (the demo only does around 9 seconds worth) is called Video Repair Tool v.1.6. Has anyone found any software similar to this that is cheaper? i believe from what i have read the "moov" file is either corrupted or missing....

How can I fix my corrupted hard drive?

My hard drive is corrupted. When I boot up my computer, it appears with a question mark inside a folder.
Then, I pressed "option" while rebooting to get to the Disk Utility. I verified the disk, and it said it needed repair and hit the repair button; however, the repair button is greyed out.
I attempted to reinstall my operating system. It was locked and asking for a Macintosh HD password. I unlocked the locked drive, and tried again to reinstall my operating system, which shows up as Mountain Lion, which I did have in the past. Since then, I had upgraded to Yosemite. I get a message saying that I can't reinstall my operating system since I have had a newer version.
Any ideas on what I can do?
Would it work if I erased my operating system, then tried to install it again? I obviously want wiping the computer to be my last resort.

Install a new HDD,.
Ciao.

How can I fix a corrupt catalog in photoshop elements 8?

I am getting a catalog corrupt error in photoshop elements 8. Is it really corrupt or is my version too old now or something? I have years worth of photos in this catalog. The photos are on my hard drive, but is there any way to repair or reconstruct the catalog? Are the tags and albums saved somewhere?

Hi,
The details about the tags and albums are all stored within the catalog so you could try to repair it.
If you can't load the organizer, try holding down the shift key while you start the organizer and it should open the Catalog Manager and jump to step 3 below.
Load the organizer
From the File menu, select Catalog - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manager.
Good luck
Brian

How do I fix a corrupted Finder icon in the Dock

Hello,
My Finder icon has spontaneously corrupted in the Dock. The icon of the Finder.app (in the CoreServices folder) is perfectly fine and its icon the Resources folder of the Dock.app is also perfectly fine.
Yet, the icon of Finder is corrupted in the dock as shown here: http://img802.imageshack.us/img802/2973/dockimage.png and in the picture below
Any ideas, anyone?
My specs are as follows:

Have you tried removing all files containing com.apple.dock from the Preferences folder in your HOME Library folder and in the ByHost subfolder of the Preferences folder, then restarting the Dock (or logout/login)?
(To get to the home Library folder, hold option key down while using the Finder Go menu, select Library. Or use the "Go to Folder...." option and paste in
~/Library/Preferences .)
charlie

How do I fix a corrupt .jpg from Photoshop?

I try to upload .jpg images, which I saved from Photoshop, onto walgreens.com and shutterfly.com, and each site tells me that my file is corrupted. Can someone please help me find a solution to "uncorrupting" my .jpgs?

If you file opens fine in Photohsop would say that error is a false positive,
Open you image in photoshop, check they are rgb 8bit not cmyk.
You can check this up in the filename. This one is cmyk/8 bit
Use image >> mode to correct you file.
If that does not solve your issue try doing a save as to a new filename, and try uploading that.
If you still need help, please send a screenshot of your file details.
Mac - command I on a file
Win - right click properties

How can I fix a corrupt ssd mbr or gpt

I have a Runcore 64gb mini pci-e SSD with a USB cable. It is not new but used little. I wanted to make it bootable as a usb device but may have hosed it. What I did: (sorry, this is long)
Set up a single guid partition, and sucsessfully made a 63gb partition.
Then I used "erase free space" on the partition.
Here's where I screwed up. I decided to start over and "secure erased" the drive, not the partition I created, but the whole drive. That was a bone head mistake.
Well, after that, I could not change the partition and the root drive shows it's 2tb. disk repair says it's good. Funny thing is, I could still see the partition but not repartition.
I even used Carbon Copy Cloner to put 10.6.7 on the partition. It worked, I could boot to it. But it still won't let me change anything. I kept trying different erase options and continued to say it could't complete the task--until the last time I tried it. Now I can't see the partition. I still see the drive in disk util but can't do anything with it. It shows the same way on a Windows7 machine (2.2 tb).
After a lot of googling, It seems I have a corrupted MBR but the GPT part that Mac uses was ok...or used to be. Sometimes the drive shows "0" capacity, sometime 2.2tb. Last night I had dreams about MBR's GRUBs and GPTs. Today, in terminal, I typed "diskutil list" and got: identifier disk2, size 30.5gb (which is the size of the CCC drive I cloned), and the partition name that I originally made which was 63gb.
All I want to do is clean it off and start over. I don't care about the data. Any Advice? I would like to try something before tossing it. I'm totally willing to try anything since there is no critical data on it.
If you read all of this, thank you!

Can anyone at least point me in the right direction? perhaps I posted in the wrong area.

How do I fix the email domain used in my apple ID?

The valid domain is yahoo.com.ph but was able to login with only yahoo.com. Now, I cannot reset my password because I don't receive the code when I use the email @yahoo.com, and iForgot tells me that the @yahoo.com.ph one is not a valid ID.

Go to https://getsupport.apple.com . Click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. If you have any problems with that try this form: https://www.apple.com/emea/support/itunes/contact.html

How do I fix a corrupted admin account? I get an error when I attempt to log in.

There was a shut down due to a power failure. When the mac started again, it did not show my Home folder, which is on an external drive. The desktop was not correct and everything looks sort of generic, rather than reflecting my preferences.
I use the Advanced Options in the user accounts to reset my home folder, although it seemed to show the correct location for it. When I changed it, the locations was shown as externaldisc1 rather than externaldisk, which I thought was the correct name (not the real names). I used disk utility to check name of the external disk and it should the volume as externadisk1, so I went ahead and made the change.
Now I cannot login. I get an message that says Cannot log in at this time because an error occurred.
I have two drives that I can use as a startup. The internal drive is running 10.9. This is the one that has the problem. I can still login if I startup from the external drive, which is running 10.8, as can be seen below, and is the disk on which the Home Folder is located.

Well, if it were me, I'd try a couple of other things first:
- Force a reset of the admin password
As before, boot into Recovery HD
From the menu, choose Utilities, Terminal
Type "resetpassword" (without the quotes) and hit enter
Select the Macintosh HD volume
Select your account from the list and give it a new password, click Save
Restart normally and test
- Reset your Home directory permissions
Do steps 1-5 above, choosing yet another password
Also click "Reset"
Restart normally and test
I Believe in trying things that to from the least potential harm to the greatest if these don't work, please reply back.
My next choice would be to do a restore from time machine from a point before you had this trouble (you do have backups?) and, in the absence of advice from more experienced community members, you could try the linked article, bearing in mind that a full erase and reinstall might be needed.

How can i fix a corrupted garageband file????

I have here a file that i was working on. I a cd track, and i imported it into the garageband file. After my computer crashed as i was exporting the completed track into itunes, i restarted my computer and when i went to open the garageband file, it said the file was no longer supported. so i opened the file in anycase and was no longer able to use the cd track i had imported. It said that it found 67 audio tracks in 8 bit format. This format os unsupportedd and cannot be played back....can someone help me find some kind of resolution to this issue??

You'll probably have more luck getting help with this if you post in the GarageBand forum:
https://discussions.apple.com/community/ilife/garageband
Posting here is unnecessarily limiting you to those who would happen to be running GarageBand on a mini.
Regards.

How do I fix my corrupted Project?

Using RH6 HTML.
No matter what I have tried, while I can open the project, I cannot open any of the files.
Have tried trashing the .xpj and .cpd.
Imported an older version of the file I was retrieving when the project crashed.
I can open the project, however, no matter what file I attempt to open, the project crashes with this popup:
"RoboHelp HTML Application has encountered a problem and needs to close. We are sorry for the inconvenience.
Please tell Microsoft about this problem."
The report reads like this:
AppName: robohtml.exe
AppVer: 6.0.99.0
ModName: iwysiwyg.dll
ModVer: 6.0.99.0
Offset: 000390ac
and also indicates this file would be sent to Microsoft: C:\WINDOWS\Temp\1cbb_appcompat.txt
Thanks for your help.

Hi there
So what's new?
Did you upgrade the operating system? If so, what were you using before and what are you using now?
If you were on Windows XP and were upgraded to Windows 7, perhaps that's the reason. In that case you need to upgrade RoboHelp to a recent version that's compatible.
Where is the project located? Local C drive or on a network drive?
If on a network drive, try moving things to the local C drive.
As you can see, we need more information.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How do I fix a corrupt domain?

Similar Messages

Maybe you are looking for