How do I fix a .dll file is missing

When I updated my iTunes the last time I was prompted a few days ago it quit starting I get an error message "The program cant start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"
I have reinstalled a few times and restarted the computer but no luck just the same thing. I uninstalled and reinstalled as well, no help. Anyone out there have a fix for this? I am running Windows 64 bit on a Sony VAIO that works fine otherwise.
Sure appreciate any help, I am really stuck.
Downfamily

Click here and follow the instructions.
(98767)

Similar Messages

Just started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?

Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?
I now see the message from tt2 and will try that. Thanks!

Read this:
MSVCR80.dll missing, cannot install iTunes

I have windows 8, 64 bit. I am trying to install ITunes 64 bit installer, but keep getting an error message that says a .DLL file is missing. How can I fix this?

After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
coming all the time.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do you fix a movie file so Apple doesn't consider it a podcast anymore?

How do you fix a movie file so Apple doesn't consider it a podcast anymore?

Try right clicking on the Podcast / Get Info / Options / Media Kind: Change to Movie

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

How can we make a .DLL file..???

Hi,
can any one tell me how can we make a .dll file..
can we insert any font file (.ttf), image, icons in in the dll file to call them progrmatically in forms 6i...and use them onu where
like i am currently using d2kwut60.dll file to call mouse cursors that loaded into it..
I would appreciate any response to this issue..??
regards,

Ok,
Let me take this example.
Supposing A vendor with 3 AP open items, B vendor with 2 AP open items.
When making a payment proposal, SAP shows only 2 lines, namely, collected by vendor code.
Looking at DME file, however, it shows 5 lines which means all individual open items.
What we want to make is 2 lines in DME file, which means grouping invoices by vendor in a DME file.
Hope it makse sense.

Dll file is missing on installing the app-v 5.0 sequenced application

HI All,
I have sequenced a application using AppV 5.0 Sequencer. During sequencing the application is fine, I gave the PVAD as C:\Program Files (x86).
After installation of the sequenced application, on launching the shorcut it throws error that
"The program cannot start because PBVM100.dll file is missing from your computer. Try re-installing the application".
I searched for that dll file, the weird thing is the dll file is present in the ProgramFiles(x86), but still i dont why the application was throwing such an error.
If I install the source it is fine, but if I install the sequenced application it throws error.
I even tried connection groups through SCCM 2012, it is still throwing the same error.
I am out of ideas. Can anyone help me on this issue.
Thanks in advance.

Hello Cody. I created a sequenced
Actuate 7 eSpreadsheet Designer 10.0.2 with Appv-5 Sp2. I published the package using the Powershell commands, but When I tested the app in this test machine the app never openned. The process eSpreadSheet.exe cosumed the 99% of the CPU and never
open the app. I performed a Devirtualization in another machine and it looks work properly, So I think it's a virtualization problem. Do you have any idea how to fix this?
Note: I created another sequence including all the DLLS detected in SystemX86 in the same directory where the exe file resides for this application C:\Program Files\Actuate7 as you suggested in the last entry but I'm still having the same problem.

Wat is the best solution when I get DLL file is missing ,is that SFC to run or system restore?

hi,
wat is the best solution if I get an error some dll file is missing , is that SFC utility to run or sytem restore or some other solution?
thanks
johan
h.david

then it's fine to perform a system restore, but it will revert some changes you have made on your system.
and detailed infoemation would be helpful.
Regards
Yolanda
TechNet Community Support
Most error messages relating to missing .dll files are due to virus scanners. The scanner removes the threat (the .dll file) but leaves the program behind that tries to invoke the .dll file. Your recipe of using System Restore to fix the problem could well
backfire: It might restore the infected .dll file! This is why it is important to know the full wording of the error message. If the missing file resided in the System32 folder then it's probably OK to restore it. If it resided elsewhere then restoration would
probably be a bad idea.

Error message on Windows 2000 startup, "Tcmsvr.dll, File is missing"

We get the same error messages three times on Windows 2000 startup on some of our companys computers: "Tcmsvr.dll, File is missing". The computers are Tecra s1 models.
Which Toshiba driver is this related to?

I have checked the Toshiba driver page and it seems that the common modules for Tecra S1 are not available.
Anyway, the Tcmsvr.dll file could be also a part of Toshiba console. Its very difficult to detect it.
The Toshiba console is available on the driver page.
It's worth a try.

When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks

When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

I was installing an update when I got the error message that the MSVCR80.dll file was missing. It wants me to reload itunes. What do I do?

I was installing an update when I ogt the error message that the MSVCR80.dll file was missing and windows error 126. What do I do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to fix corrupt dll files

Hi,
Happy New Year!
May it bring all of us, Good Health, Happiness, Harmony & Prosperity!
I will like to let you know that a few month back, I bought this S10-2 directly from Leveno, USA, but regrettably with in a a few days, I realized that this machine has the following problems:
1) The "dll files" are corrupt, details are as follows:
advpack.dll
dnsapi.dll
gdi32.dll
msv1_0.dll
2) Power Options: Control Panel / Power Options / Advance (Power buttons) has 3 options (default)
a) When I close the lid of my portable computer : Stand by
Kindly note that when I do this my system enters the stand by mode but after an hour or two even when the lid is close position, it wakes up again which I feel is a mall function and need a fix.
I will also like you to know that as of date I have repeatedly restored the machine to Factory Settings with a hope to fix the above problems but in vain as such I thought of approaching this august forum not only to educate myself as to how the files got corrupt but also to find a permanent fix, if possible?
Since I am out of USA where warranty facility can't be availed, hence I do look forward to hearing from a guru, who can bail me out!
Thanking you in anticipation and may God bless you!
Warm regards,
Anwar

Hi and welcome to lenovo forum...
wish you a happy new year ...
That could help BIOS 22 for S10-2 why ?
1ACN22WW 1.Fixed abnormal resume from standby mode issue.
Installing the package in Windows.
======================
1. Locate the file 1ACN22WW.exe that has been downloaded.
2. Double click the 1ACN22WW.exe icon.
3. Click install
4. Click flash bios
5. Press Enter to start flashing. During the process, you are advised not to turn off the computer.
6. When the update finishes, the computer will automatically reboot for the changes to take effect.
prefer to update BIOS ...after that procedure ...recover to factory again...that should fix that prob...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

How to cancel reregistering windows .dll files?

How do I undo the following recommended "fix" posted on this Apple website... I was having problems with the ipod shuffle (receiving error 1418), but since resolved that issue by downloading the ipod reset utility.... However, an earlier attempt to correct my problem was made by following the procedure detailed below.. and it's messed up my computer; how do I undo this change??
http://docs.info.apple.com/article.html?artnum=304996
iTunes displays -50 error message when syncing iPod on Windows XP
Symptom
When trying to sync iPod, change iPod settings, or restore iPod from within iTunes you may see one of the following error messages:
"The iPod "Customer's iPod" cannot be updated. An unknown error occurred (-50)"
"The disk could not be read from or written to"
"The iPod "Customer's iPod" could not be restored. An unknown error occurred (1418)
Products affected
iPod (all models)
iTunes 7.x (Windows XP)
Solution
This symptom may be caused by an issue with the digital signing of Windows XP drivers. Following the steps below to reregister several .dll files mentioned below may resolve this issue. Before proceeding however, try to restore the iPod using the latest version of iTunes.. If you are unable to restore it or the symptom reappears, then follow the steps below:
Disconnect the iPod from the computer and close iTunes.
Highlight all of the following 10 lines of text that begin with regsvr32 and then choose Copy from the Edit menu of your web browser:
regsvr32 /s softpub.dll
regsvr32 /s wintrust.dll
regsvr32 /s dssenh.dll
regsvr32 /s rsaenh.dll
regsvr32 /s gpkcsp.dll
regsvr32 /s sccbase.dll
regsvr32 /s slbcsp.dll
regsvr32 /s mssip32.dll
regsvr32 /s cryptdlg.dll
regsvr32 /s initpki.dll
Open the Notepad program by navigating to:
Start > All Programs > Accessories > Notepad
In Notepad, choose Paste from the Edit menu. Note: make sure that the text that appears in Notepad is the same as what is shown above.
From the File menu, choose Save As.
In the File name: field type appleipod.bat and save the file to the Desktop.
Close Notepad and locate the appleipod.bat file. It should appear on the Desktop with the icon shown below:
Double-click the file and you will see a black window appear on the screen for about a minute. Wait until the window automatically disappears and proceed to the next step.
The appleipod.bat file can be deleted at this time.
Open iTunes and connect the iPod.
When the iPod appears in iTunes, restore the iPod and resync your content.
Note: Because some malware may unregister the .dll files, make sure you have the most recent updates to your anti-virus software and then do a full scan of your files.
ipod shuffle Windows XP error 1418
Windows XP

windows has stopped recognizing microsoft office files... For example, if I try to open a Word document attached to an e-mail, Windows asks me to search the web for a program to use to open it. The way around it right now is to save the document to my hard drive first and then open it using MS Word, but this step was unneccessary in the past. I read somewhere that this could be due to my registry files being corrupted, so I believe the above listed "fix" may be responsible.
Thanks,
Windows XP

How can i call a DLL file from labview?

Iam using a sensoray 2601 module.It is given as DLL file(S2600.DLL).How can i call this function from LabVIEW?
Please Mark the solution as accepted if your problem is solved and donate kudoes

As far as I can tell problems might occur with the call library function node if the the DLL from visual basic is actually an ActiveX dll if that is the case it seems calling the dll by using the Invoke node is the way to go.
Have a look at this
/sletten

How do I fix a .dll file is missing

Similar Messages

Maybe you are looking for