How do I fix a shared library error?

Thought I did a good job of cleaning out some old fonts, but now InDesign will not launch because of a shared library error:
"+InDesign 2.0.2><PublicLib><ACECarbonLib><>"
I need to fix this very quickly... what do I do?

You probably need to run the installer again and "Repair" the installation. I presume you have some really ancient hardware there to make 2.0.2 run at all.

Similar Messages

  • How Do I Fix This Runtime Library Error?

    Hello,
    I just finished up my site, and this is the only thing holding me back from publishing it. Whenever I "Test" my site, I get this error: " Your content will not stream. Runtime Shared Library (RSL) preloading will require all of your content to download before the first frame will play.
    To prevent this you can change the Runtime Shared Library Library Settings, in the Advanced ActionScript 3.0 Settings dialog which can be raised from the Publish Settings dialog.
    The Runtime Shared Libraries being preloaded are:
    textlayout_1.0.0.595.swz for TLF Text"
    Does anyone know how to correct this error? If you do, could you please walk me through it step-by-step. I am still very new to "Flash Professional (CS5)" & "ActionScript (3.0)"
    Above is the exact error message I receive.

    given the information provided in this forum, do you really think someone could answer that question?

  • Shared Library Error!

    I was working in Adobe Illustrator when a transparent grey screen appeared and siad you need to restart your computer. After restarting I launched Illustrator again and I got this message.
    Application Launch Failure
    "The Application Illustrator could not be launched because of a shared library error"
    I had this happen while using Photoshop a couple of weeks ago too! Could someone please tell me what this means and how to fix it?
    Thanks

    Hi-
    First off, the "gray screen" is a kernel panic.
    A kernel panic, along with the "shared library" error, may mean that you are having problems on the harddrive. Another possibility is RAM error.
    First, you need to eliminate suspects by disconnecting all but your monitor, Apple keyboard, and mouse.
    Then, check your harddrive directory while booted to the OS X install disc. Use Disk Utility to "Repair Disk".
    It will also be worthwhile to download Rember and test your RAM.
    Take these initial steps toward isolating the problem. The cause may be elsewhere, but, we need to eliminate common suspects.
    Resolving Kernel Panics
    Isolating issues in OS X

  • Microsoft word does not launch because of shared library error

    The application "Word" could not be launched because of a shared library error: "-<Microsoft Word><CarbonLib><CFMPriv_System>"
    that is the message i got when i tried to use microsoft word, how do i fix it?

    See if reinstalling Word fixes it. Otherwise, since Word is not an Apple product, you should consider posting your question on Microsoft's own forums for their Mac products, as they are geared more toward the issue than an Apple forum:
    http://www.officeformac.com/productforums

  • How do I fix the itunes library.itl file is locked/

    How do i fix " the itunes library.itl is locked?

    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914
    iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/TS1277 - Shared folder issues with Store authorization.
    gittekjaerulff I have bought a new laptop (not a Mac)
    You posted in the Mac forum but say you are not using a Mac.  I'll request your post be moved to the Windows forum.

  • Help with Shared Library Errors?

    I am getting a Shared Library Error (The application "APP NAME HERE" could not be launched because of a shared library error: "1<APP NAME HERE><CarbonLib><CFMPriv_PrintCore>") whenever I try to open a non-Mac application (Adobe or Microsoft, basically). And when I try to print, I cannot adjust anything in the Page Setup, else the application crashes.
    Problems began right after a Software Update: to 10.4.8 (and iTunes to 7.0.1).
    Any thoughts? I have seen references here and elsewhere to various shared library error issues, with solutions that have worked for some people sometimes, ranging from dowloading the newest version of Quicktime to archiving everything and reinstalling the system software.

    I saw you had posted in the other topic and were
    advised to start a new one. But did you try any of
    the other approaches?
    Yes. I've been trying simpler things first, such as removing certain caches from my Library.
    It helps to be
    more specific about the particular applications.
    Adobe Photoshop 7.0 and In Design 2.0.2. Microsoft Word 11.0 and Excel 11.0 are the ones that give me the shared library error. At the same time (since the upgrade to OS 10.4.8 and iTunes 7.0.1), I have been having trouble with my printer, a Canon i850 (printer software quits with each printing, although the printer does print the item; and trying to adjust Page Setup causes whatever application I'm in to crash).
    Did you look at Yo
    u receive a "Shared library" error message when you
    start Office for Mac programs for example?
    Not until you suggested it. Thanks. It has some of the same suggestions, though — no new ones. I've been trying to avoid the archive/install option, but I guess I'm headed that way.
    You say you have iTunes 7.0.1, what version of
    Quicktime do you have?
    QuickTime Player 7.1.3.
    Unfortunately there doesn't (as yet) seem to be a
    single fix for all these errors. We'll just have to
    keep trying!
    That's the sense I'm getting.
    Thank you for your attemps to help.

  • MS Word- Shared Library Error after 10.4.7 Instal

    After re-starting after installing the upgrade, I received the message Microsoft Database Shared Library Error: Microsoft Database Daemon><CarbonLib><CFMPriv_CarbonSound and, obviously, no launch of Office products. Any solutions?

    After installing 10.4.7 everything but Office apps seemed to work. Office x worked but not Office 2004. Did an archive reinstall (after backing up data) and all apps seem to be working. I plan to keep an eye on this forum and/or to wait for greater minds to fix this mess before I install upgrades. I uninstalled Norton a while back so I don't think that is the issue for me.

  • Application launch failure - Shared Library Error

    I'm getting a "shared library error" when I try to launch nearly all of my applications..Microsoft Office, Photoshop, Final Cut, etc.. The error reads:
    The application "Excel" could not be launched because of a shared library error: "?<Microsoft Excel><Apple;Carbon;Multimedia><CFMPriv_QuickTime>"
    I ran disk utility and it said 1 volume could not be repaired because of an error. i went & bought Disk Warrior & ran it, but it did not fix the problem. Anything I can do other than Zeroing out the hard drive & re-installing the OS?
    Oh, and i tried to re-install some of the apps, but that didn't work either.

    You can try to reinstall Mac OS 10.4.8 combo update Intel or PPC.
    Anyway, this is symptomatic of hard drive failure and needs repair (changing the hard drive).
    Why reward points ?
    MacBook Pro 15" 2,33GHz | iPod | iPod Shuffle | Mighty Mouse BT   Mac OS X (10.4.8)   2Go RAM, 120G HD

  • MacBook     Application Launch failure    the application "word" could not be launched because of shared library error " Microsoftword "

    Help!!!   Application Launch Failure      the application "word" could not be launched because of a shared library error   "<microsoftword><><><>"
    Anyone know?   APPRECIATE IT IF YOU DO!!

    I installed Palm Desktop 4.2.1 Rev A for Mac and am getting the same error:  The application "HotSync Manager" could not be launched because of a shared library error: "<HotSync Manager><HotSync Manager><HotSyncLib.PPC><SetConfigureConduitCallBack>".  I also then get an Unexpected error #-10810 message.  I haven't even tried one sync yet.  I tried running the suggested fix to this posting, but it didn't work either.
    Any help would be greatly appreciated.
    Thanks. 
    Post relates to: Palm IIIxe is the PDA I would like to sync using 4.2.1
    Message Edited by Youngks on 08-29-2008 05:56 PM

  • Appleworks could not be launched; shared library error?

    Launch failure:  "Appleworks could not be launched because of a shared library error:  <AppleWorks><MW_MSL.PPC.Shlb><InterfaceLib><>"
    Can anyone suggest a fix?

    See this user tip.

  • Zinio Reader could not be lauched -shared library error

    I am getting the following Application Lauch Failure.
    The application "Zino Reader" could not be lauched because of a shared library error: "<Zinio Reader><OpenGLLibrary>"
    Everything was working around two to three weeks ago with the reader and now I have been unable to resolve this. I have tried upgrading application with no success. I have repaired disk permission with the disk utility. Still no success.
    Any suggestion how to remedy?

    Only solution that worked was to reinstall OS X by Archive and Install. Then followed the following instructions.
    UNINSTALL
    Please drag the following to the Trash (you may not have all these
    items; please delete any that you have):
    Applications > Zinio
    'User' > Library > Preferences > ContentGuard
    'User' > Library > Preferences > Zinio.plist
    'User' > Library > Preferences > com.zinio.reader.plist
    'User' > Library > Preferences > com.zinio.zdlm.plist
    'User' > Zinio Library > zcmd.plist
    Be sure to "Empty Trash."
    RE-INSTALL

  • Shared library errors!!!!

    Hello
    I just did a software update for Ipod updater, quick time and 10.4.7. I went away from machine and when I came back I had an error message, unfortunately I dont recal exactly what it said but it was along lines of "10.4.7 failed to install and has been moved to trash."
    Then I tried to use various applications and I am getting the following dialogue for many of them:
    "The application "XYZ" could not be launched because of a shared library error:"/ <"
    I have done the obvious, repair permisions, disk utilities, no luck, I have read forums but have not seen a specific solution.
    I have seen some distantly similar suggestions about dumping prefs for applications but I dont know how to do that. The next solution appears to be reinstall syst software.
    Any help, much appreciated.
    Thanks
    Wayne

    Edman
    Thanks for taking time to reply.
    I got everything back up and running (i think, today is the 1st day I will be using machine).
    Here is what I did, in case it is useful for others:
    1) I backed up my account
    2) Went to apple downloads
    3) found the 10.4.7 download for PPC users (NOT the INTEL versions, I am still on a PPC Mac)
    4) downloaded & installed
    5) rebooted (had a wierd exp when rebooting, machine was halfway through reboot and suddenly rebooted again.
    6) 2nd reboot, (sweat on brow) everything rebooted as normal!!!
    Not sure why the install quit the first time via automatic software update, my only theory is apple was telling me to instal the intel version.
    Best
    Wayne

  • Please help! Shared Library Error... no applications will open!

    Hi. Major issues!!
    My computer was unplugged for 2 weeks (renovations). When I set it up in my new office, none of my applications would open! (Microsoft, Adobe, AOL, etc...) Safari is working.
    I get this error message:
    The application "Photoshop" could not be launched because of a shared library error: "5<application><CarbonLib><CFMPriv_SpeechRecognition>"
    The application "Word" could not be launched because of a shared library error:
    "8<Microsoft Word><CarbonLib><CFMPriv_SpeechRecognition>"
    The application "AOL" could not be launched because of a shared library error:
    "9<AOL (Bootstrap)><CarbonLib><CFMPriv_SpeechRecognition>"
    The application "AppleWorks" could not be launched because of a shared library error: "4<AppleWorks><CarbonLib><CFMPriv_SpeechRecognition>"
    Here's what I've tried...
    I have tried to install combo update 10.3.9. .. didn't work.
    My computer was purchased in 2004... just moved to a new house... do not know where my installation dvd is... so to reboot on that is not an option.
    I tried disk repair permissions... didn't work!
    I opened my log console to view the crash logs... and it appears a lot has crashed... but I can not understand what any of it means!?!
    Can anyone help or offer some advice?
    Can anyone understand a crash log if I post it?
    Please help!?! Taking an online masters course and this is a major dilemma!
    Thanks,
    Lindsay

    Hi Lindsay,
    "Can I get one from a mac store? Does it have to be the original one I used when I purchased my mac?"
    No, you can no longer purchase 10.3 Panther disks from Apple Stores, online or otherwise. You may however, be able to purchase replacement disks for your computer (if Mac OS 10.3 were the original install disks that came with your mac) by calling Apple and explaining and having the serial number ready of the computer.
    If your installation of 10.3 was an upgrade you can purchase retail copies of 10.3 disks online from many resellers, such as on ebay or sites such as FastMac, but be sure to purchase a retail box set and not upgrade or machine specific disks.
    Did you perform all of the steps that Kappy steered you to in Dr. Smoke's FAQ first and your only option left is the Archive and Install?
    littleshoulders

  • How Can I Fix A QuickTime Codec Error?

    How Can I Fix A QuickTime Codec Error?
    I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
    These movies ran in QuickTime just fine until about a month ago.
    All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
    If I click on the Thumbnail Preview "It" runs.
    How can I fix this?
    TOP image is the Error message.
    BOTTOM image is the Thumbnail Preview info.
    I've checked out "Tell Me More" and have not found a solution.

    How Can I Fix A QuickTime Codec Error?
    The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
    If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
    or here in the "Format" entry...
    Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
    if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
    use a third-party media player that will open the file, or
    use a dedicated media information utility to learn this information....
    Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
    These movies ran in QuickTime just fine until about a month ago.
    All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
    Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
    As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
    If I click on the Thumbnail Preview "It" runs.
    f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
    In short, there are several possibilities here and not enough specific information.

  • How do I fix the iTunes system error 7 windows error 126?

    How do I fix the iTunes system error 7 windows error 126?

    Sorry to hear about that
    Certainly hope this assists you:
    ≈≈≈≈≈≈≈≈
    https://discussions.apple.com/docs/DOC-6562
    ≈≈≈≈≈≈≈≈
    Please do respond with results/questions.

Maybe you are looking for