How do I fix an SQlite3.dll error that keeps popping up on startup?

On bootup on my PC I always get the "unable to find SQlite3.dll file" in a box on the desktop after boot.
How do I resolve this?
(I know, buy a Mac..v0v)
Thanks,
Tom

[[Troubleshoot Firefox issues caused by malware]] and [[Reset Firefox – easily fix most problems]]

Similar Messages

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

This also work100%
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

You cannot stop it from popping up.
it will continue every few minutes until its installed.
just keep using the back button near right side of home button.

How can I get rid of this message that keeps popping up: Widevine Media Optimizer Update Available? Don't know what it is but don't want it.

How can I get rid of this message that keeps popping up:
Widevine Media Optimizer Update Available? Don’t know what it is but don’t want it.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

How can I fix a dbwrap.exe error that prevents a SharePoint 2010 installation?

Every time I attempt to install SharePoint 2010 on my Windows 7 64-bit laptop I get the following error in the setup log:
'dbwrap.exe' failed with error code: -2068578304. Type: 8::CommandFailed.
The installation aborts. I need more information. How do I fix this problem?J Tom Kinser

thank you so much Yuming.
I get the same issue while installing Sharepoint on Win 7. I check out error logs and get to know it's SQL Server Express issue.
First I found this in DBWrapLog log:
INF:0:Cannot find sql express instance. Do fresh install.
INF:0:Try to install SQL Express.
INF:0:Entering function RunCommand
INF:0:Starting process C:\Program Files\Common Files\Microsoft Shared\SERVER14\Server Setup Controller\sqlexpr.exe with args /q /HideConsole /ACTION=install /pid=11111-00000-00000-00000-00000 /FEATURES=SQL,Tools /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS"
/SQLSVCACCOUNT="NT AUTHORITY\Network Service" /INSTANCENAME=SharePoint /INSTALLSQLDATADIR="C:\Program Files\Microsoft Office Servers\14.0\Data" and waiting 00:49:10 for it to stop
ERR:-2067919934:Leaving function RunCommand
Then I start my SQL Express instance and run Sharepoint setup to repair. However I got this error again in DBWrapLog:
INF:0:Entering function RunCommand
INF:0:Starting process C:\Program Files\Common Files\Microsoft Shared\SERVER14\Server Setup Controller\sqlexpr.exe with args /q /HideConsole /ACTION=Repair /INSTANCENAME=SharePoint and waiting 00:49:10 for it to stop
ERR:-2068643839:Leaving function RunCommand
INF:0:Try to config SQL Express instance.
INF:0:Grant Exec Right for dbo.sp_add_job
INF:0:Data Source=.\SharePoint;Initial Catalog=msdb;Integrated Security=True;Pooling=False
WRN:0:Fail to config in the number 1 try, will sleep 10 seconds and try again. The exception is System.Data.SqlClient.SqlException:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
up to here, I get stuck.
Can I consult this: How do you know to change value from reg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ServerRole. And what does this mean?
Another Leon

How do i fix the disk repair error that pops up when i plug my iPod into my computer?

every time i plug my ipod into my mac a "Disk Repair" error pops up. how do i fix that?

Try a low level reformat of your iPod using Disk Utility and the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

How can I fix a Time Capsule error that says it can't be found?

Time Machine could not complete the backup.The backup disk image “... Computer.sparsebundle” could not be accessed (error -1).

THat is the C17 issue.
http://pondini.org/TM/Troubleshooting.html
If you are on Lion or ML in particular .. they have the networking ability of wet string.

How to Manually update Camera RAW? Error message keeps popping up.

My Adobe updater is not working (keeps saying it's checking for updates, but finds nothing).
I have done a fresh installation on CS6 design and web premium package today. Thus, Camera Raw needs an update for my Nikon D610 to be compatible.
The error message given when trying to install Camera Raw 8.8 Manually is:
Error opening file for writing
C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats\Camera Raw.8bi
Click Abort to stop installation
Retry to try again, or
Ignore to skip this file
My system specifications:
Windows 7 Home Premium 64 Bit
Intel i7
16gb RAM
70GB HDD space available.
Please help.

I want to add that using the Nikon software can sometimes corrupt raw files. It is always best to use Windows Explorer to copy the files directly off the card. Card readers can also become corrupt, so try a different one. I'm not sure how you are transferring files, but though I'd mention it.
Benjamin

How do I fix add-on welcome pages that keep reappearing?

This has been happening to me in version 32. The pages reappear every time I restart Firefox. I kill them, re-start the browser, and it happens again. Searching around the web for a fix, someone suggested restoring Firefox to its defaults. Did that, and it worked, but the problem eventually recurs, after I began customizing the browser again. I have the program set for fairly high security. I also have it set to reload my tabs from the previous session, but this gets changed to "show my homepage" without my action, and the welcome pages line up in tabs once again. Clearing history failed; checking for viruses proved negative.

Hello,
I had this problem in older versions of Firefox - for some reason they kept appearing until I quit Firefox from the menu. First make sure that your start-up settings aren't set to load the previous session:
* Tools (or menu [[Image: New Fx Menu]]) > Options > General
Then exit Firefox from the menu:
* File > Exit, or [[Image: New Fx Menu]] > Exit Firefox (bottom right-most icon)
Start Firefox again and hopefully they won't pop up again until the next update. If your preferences are not getting saved, see if the article [[How to fix preferences that won't save]] can provide some more help on that.

How can I stop the "plug in " stuff that keeps popping up when I open Firefox...it is annoying!!

The advertisement is anoying ...how do I make it stop

Do the
Pref = plugins.update.notifyUser if it shows as True, double-click that pref to toggle it to False
thing that is listed in this forum. You get to it via URL about:config
- TechOwl -

I keep getting a notification that says "Google Talk authentication failed"...does anyone know how to get rid of this? I tried looking for it in the apps but not really sure what google talk is or how to get rid of this message that keeps popping up.

How do i get rid of the message that keeps popping up that says "google talk authentication failed"????

funwidowlady,
Good afternoon! I'm glad I can be here to help with this error. In the device this application is identified only as 'Talk', so that be more familiar to you. First I recommend opening the 'Market' app on your phone, then Menu>My Apps to see if this application requires an update. It will display a list on top of all applications that need to be updated. If nothing exists, tap 'Home' and go into 'Settings>Applications>Manage Applications>Talk, then tap 'Clear Cache' and 'Clear Data' to remove the history of that application and stop the notifications. The app will remain on your phone for future use, if you desire to take advantage of it. Read more about Google Talk here
Thank you!
AdamE_VZW
Follow us on Twitter @VZWSupport

How do I delete an old email account from my iPhone that keeps popping up?

How do I delete an old email account that keeps popping up on my phone?

Hello Willon63,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

How Can I Fix A QuickTime Codec Error?

How Can I Fix A QuickTime Codec Error?
I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
If I click on the Thumbnail Preview "It" runs.
How can I fix this?
TOP image is the Error message.
BOTTOM image is the Thumbnail Preview info.
I've checked out "Tell Me More" and have not found a solution.

How Can I Fix A QuickTime Codec Error?
The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
or here in the "Format" entry...
Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
use a third-party media player that will open the file, or
use a dedicated media information utility to learn this information....
Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
If I click on the Thumbnail Preview "It" runs.
f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
In short, there are several possibilities here and not enough specific information.

How do I fix the iTunes system error 7 windows error 126?

How do I fix the iTunes system error 7 windows error 126?

Sorry to hear about that
Certainly hope this assists you:
≈≈≈≈≈≈≈≈
https://discussions.apple.com/docs/DOC-6562
≈≈≈≈≈≈≈≈
Please do respond with results/questions.

TS3694 How can I fix this type of error in iphone 4?"The iphone could not be restored. An unknown error occurred (3194) "please help me.

Hi everybody !
AT&T company is unlocked (factory)my iphone4 before 3 days ago so i want to restore to unlock iphone 4 with itunes but it is not restore.
How can I fix this type of error in iphone 4?- "The iphone could not be restored. An unknown error occurred (3194) "
please help me in nepali language(if posible) or english. thank you.

http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

How do I fix an SQlite3.dll error that keeps popping up on startup?

Similar Messages

Maybe you are looking for