How do I fix aperture 3 after upgrade from Aperture 2 to 3?

Hello. I have had a good search but can't find the answer.
1. 2 days ago I made a full time machine of my mac
2. local mac shop did a clean install from 10.5 to 10.6.8
3. local mac shop then installed aperture 3
4. I then tried to update my new 10.6 mac from the time machine (using migration assistant). All went well (the files are accesable), but the files do not exist in itunes, aperture, documents etc when logged in as the user created when installing 10.6.8.
The new OS has a diferent user/profile to the original one (I did not do the clean install of 10.6.8 and aperture 3, the local mac shop did). This meant I had permission problems, so I went into the original user (the one that the time machine had rebuilt) and added the new build user with full read wrire permissions.
How do I now add all my projects and photos from the original profile/user to the new one?
I havea 20 inch imac with 4 gb ram with 700gb hardrive of which 600gb is used and of that, 400gb is photos. I also havea a 4tb external drive I can use to switch things over with if required. That currently had data on it fromthe time machine backup under 10.5.
Any help will be really appreciated. Many thanks.

Do still have the Trial App installer disk image? Then just run the installer again and enter your serial number to unlock the application.
Also have a look, if you have an "Accept Purchases" tab in your App Store Window, and if you see Aperture there. Then click the "Accept" button and download it.
But if neither of these works, contact Apple Support (with proof of purchase) and ask for help - maybe they will provide a new installer. Aperture cannot be just copied - it needs additional files installed in the System Library, and only the installer will do that properly.
For me it worked to restore Aperture from a Time Machine backup using Migration Assitant and including the System Library and the Applications Folder into the migration settings. Then enter again the serial number. But that should only be the last ressort, for this way you will not have a clean install of your system.
Regards
Léonie

Similar Messages

How to change table defnition after upgrade from 9 to 10 ?

after upgrade from 9 to 10, tables ddl still like 9i:
.................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
Thanks

What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
HTH
Aman....

How do I fix project after "Remove From Version Control" corrupted it?

I am using RoboHelp 9.0.1 and installed both Tortoise SVN 1.6.9 and latest PushOK SVNSCC then added my large RoboHelp project to SVN. I was able to check in and out files from SVN but had several issues with it:
1) Super super slow. Working with folders or any renames would take 10 seconds per file and up to 1 hour if needed to refresh the root folder.
2) I could not perform some actions at all, such as delete, rename, or move folders. I kept getting COM errors.
I therefore decided that working with SVN and RoboHelp is not practical, at least not on my VPN so I decided to disconnect the project from source control and just work locally. The only option that I saw that sounded like it would do that was the "Remove from Version Control". This started a process that lasted for several hours. At the end of it, I now have several significant issues:
1) The order of the files and folders in my Project Manager is completely wrong now. I have almost 1000 topics and reordering all of them is not possible.
2) The Table of Contents, Glossary, and Index files appear empty. They had content before.
2) A couple of the Single Source Layouts I had created are completely missing.
3) Many, but not all, of the folders have tons of files with the extension ending in "_temp_removed_by_svn"
4) Many, but not all, of the files are actually gone from SVN so I can't recover a clean image. There was no warning that this command would actually delete the files from SVN (I thought it would just remove the version control connection).
5) Who know what other issue exist that I haven't seen.
Any idea how I can fix this?
Thanks in advance,
Dan

Are the "_temp_removed_by_svn" files in your local folder or SVN? Let us know how you get on with the new project. It sounds like something is wrong with SVN. Can you use the SVN Log command to see whether there is a different version you can restore. This might also give you an indication of what might have caused the problem. You could try deleting your CPD file. It gets rebuilt it is isn't there anyway. This file can become bloated and it is good practice to delete it when it gets close to 2mb in size. Your project is fairly large and has a lot of folders and may affect performance. Have you considered splitting them and merging the output? I know you probably don't want to consider this right now, but I think it may be a better long term solution.
The RoboColum(n)
@robocolumn
Colum McAndrew

Problems with Aperture after upgrading from Tiger to Snow Leopard

Help! I recently upgraded my IMac operating system from Tiger to Snow Leopard. Now, I am finding my aperture is not responding the way it used to. I cannot change the border dimensions; I can't print. Any suggestions would be appreciated. I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3. Is this correct?

This is called a Kernel panic.
See here for possible solutions:
http://support.apple.com/kb/TS3742
Did you do anything else apart from ungrading OS?
Did you add memory?
Bad or not well seated memory modules are often a cause of kernel panic

MobileMe albums not visible in Aperture after upgrade from iPhoto

I've just upgraded from iPhoto to Aperture and all went well, except that my mobileme albums aren't appearing. I published a test album which worked, but my existing ones don't appear.
I've read on another thread that a dodgy character in an album name caused a similar problem but I can't see anything that looks odd in my mobileme album names.
Any ideas?

I had the exact problem and found the solution here.

How do you fix 'unable to upgrade from version 0'?

I have been working on 6 ibooks over the past year, documenting a lot of stuff for user manuals for our school. The ibooks were all created in iBA version 1.0, but are not published - we only use them internally so we just use the previews.
I gave up trying to upgrade my 1.0 iBooks, it takes too long to 'optimize' the files when I try to open them in 2.0. I have read all the issues with iBA 2.0, but decided to download 2.0 on another computer and wabt to try to re-write all my old 1.0 manuals (I have all the files that went into them).
However, when I double-click to open the 2.0, nothing happens. So I go to 'File' and select 'New from Template Chooser'. I then get the window with all the new templates, including the portrait ones. When I select any template, say the 5th one for example, I get the prompt "The document 'Textbook 05.ibatemplate' could not be upgraded. Unable to upgrade from version 0". This happens for every template. I don't understand. I downloaded the 2.0 from the app store onto a 'clean' computer. Yes, it has Lion on it and all the spec requirements to run iBA. Can anyone help me with what to do next?

Did you ask Apple for help yet?
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

How to start LR CC after upgrade from LR 5 during trial

I have a trial version of LR 5 for a week now and downloaded the LR CC upgrade yesterday. The LR CC app does not start. After asking if I want to continue my trial for another 23 days it just disappears without opening any library. I have tried uninstalling LR 5 completely, starting from the library with "Open WIth" also. How can I continue my trial on LR CC?
I am on a Mac with OSX Yosemite.

I have a trial version of LR 5 for a week now and downloaded the LR CC upgrade yesterday. The LR CC app does not start. After asking if I want to continue my trial for another 23 days it just disappears without opening any library. I have tried uninstalling LR 5 completely, starting from the library with "Open WIth" also. How can I continue my trial on LR CC?
I am on a Mac with OSX Yosemite.

Existing stacks not working after upgrading to Aperture 3

I am having an issue regarding my stacks after upgrading from Aperture 2 to the new Aperture 3. When I select any of my existing stacks that came over from my Aperture 2 library to Aperture 3's library, my stacks will not expand to show my images associated with that particular stack. Also, when I click to expand the stack, instead of showing how many images are in a stack, it shows "1 of x" (x being the number of images associated with that stack). When I go to unstack, it removes all of the stacked images, only leaving the pick visible in Aperture 3. This only happens with my existing stacks; it does not happen when I create a new stack in Aperture 3. Anyone else having this issue?!? Is there a solution to rectify this problem?

As strange as this sounds, I may have solved my own question! I created a new blank project, and then I took the photos from the "Photos" section in the Library, and clicked and dragged them in -- and low and behold, the stacks were there! It took the photos out of the original project and moved them to the new project -- stacks, edits, and all. If anyone else is having this issue, this might be the fix.

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

After upgrading to Aperture 3.4 it doesn't open anymore.

After upgrading to Aperture 3.4 it doesn't open anymore. Every listed suggestion in forums did not help.
After repairing till 99% Aperture closed. It happened with all my libraries, small and great. All of them can be opened in iPhoto.
After placing aperture.app to the trash can and putting it back to programs again, after a restart, I even couldn't find in preferences com.apple.aperture.plist file anymore. Apple please help!

After placing aperture.app to the trash can and putting it back to programs again,
How did you put it back to programs? The idea is to make a complete reinstall
The problem is:
There is a problem with the Aperture installer. In some cases the installation is not complete, if you update on top of a recent version.
For most posters here (there must be 20 and more discussions by now) it helped to reinstall Aperture after removing the Application from the Applications Folder and the reinstalling again.
If you installed Apperture initially from the boxed retail version, reinstall from the CD/DVD.
If you installed from the AppStore, download again from the AppStore.
If you unlocked the Trial or bought online previous to the AppStore, use the saved installer or download the Trial again.
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Upgrade immediately after installing the previous version; you cannot open your current library with the previous version.
Regards
Léonie
Just for the record:
To remove the preferences:
The Preferences are in your User Library, Preferences folder:
The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
your Home Folder/Library/Preferences/com.apple.Aperture.plist.
But I'd try to reinstall first - removing the preferences will only be a temporary fix, and the crashing may occur again, if you do not fix the broken Aperture installation.

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

CFFTP putFile timeouts after upgrading from ColdFusion 8 to ColdFusion 9.01

CFFTP putFile timeouts after upgrading from ColdFusion 8 to ColdFusion 9.01
Important thing to mention is that Coldfusion 9.01 is 32bit and is installed on Windows Server 2008 which is 64 bit off course.
When I try on ColdFusion 9.01 32 bit version that is installed on xp 32 bit everithing works fine.
Any Idea how this can be fixed ?

attribute passive="yes" solved this problem

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

How do I fix aperture 3 after upgrade from Aperture 2 to 3?

Similar Messages

Maybe you are looking for