How do i fix blue screen on ipad2
All of a sudden i have a blue screen on my ipad 2. can i fix this myself and how?
Hold down both Power and Home buttons for 10 to 15 secinds with iPad connect to computer.
Allan
Similar Messages
-
How do you fix blue screen on ipod touch
how do you fix the blank blue screen on an ipod touch?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How do I Fix Blue Screen Of Death??
My iPhone 4 got the blue screen of death and I can't find a solution please someone help me! I have not droped ever in my life so i dont know what is wrong
Then all I could suggest is:
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help
If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/ -
how do i fix the screen of death on my ipod
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How to exit iP5s blue screen without PC/Mac ?
How to exit iP5s blue screen without PC/Mac ?
Hi,
Did you create a new GUI status and used SET PF-STATUS to display it...
Or if you are using standard status..in which event are you capturing the value entered in the INPUT box..
Thanks,
Naren -
How to fix blue screen on iPad Air?
I just updated my brand new iPad Air from iOS7.0.6 to iOS7.1
Right after the update, it boot up and shows blue screen then it goes off. Then the iPad is then booting up again then show blue screen again and again.
How to fix my iPad?Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How to fix blue screen of death of windows xp with a bootcamp hard drive
i have a macbook with intel 2 duo core with 4gb ram and 1tb hard drive with lepord on it i bootcamped the hard and installed windows xp and now i am gettind a blue screen of death. so i know there repair utlite on windows xp disc when you boot to it but can't do it on the mac it there a repair utlite for windows xp cause i can still into sindows xp for like an hour before it crashes
JFJ_595 wrote:
the start-up music still plays.
The POST for the hardware checks out then.
JFJ_595 wrote:
I turn on my computer and all i get is a blank white/grey screen. No logo, no loading symbol, just a blank screen;
Command+R does nothing,
Holding Shift does nothing
Press and hold the power button down to turn of the machine.
Press and hold the Command Option R keys on the built in keyboard and press the power button, you have to be near your high speed Internet connection.
If you get something like "Install OS X" do that, it will overwrite your old copy with a new one and not touch your files or most programs.
If you can't install OS X, head to Disk Utility and First Aid > Repair Disk and Permissions and try reisntalling OS X again. (do not erase the drive as this will wipe your data off, unless your sure)
If you still get the white/gray screen with nothing while holding the Command Option R keys at boot time, I suspect your EFI firmware has been borked somehow and it's not loading to respond to the at boot key commands.
We are able to reinstall the EFI firmware ourselves, but the current method requires a machine with a internal optical drive. This problem occurs so rarely that it's not been used much and certainly unknown how well it works off a USB thumb drive, which is what I suspect the Apple Store/Repair will do.
Since your under warranty, I would have Apple replace the EFI firmware and check the machine out for hardware issues as well.
Buy AppleCare and a external drive for TimeMachine backups. -
after put blue screen willbe rstart
Hi bossallouchi,
I apologize, I'm a bit unclear on the current status of your issue. If you are having issues with your iPhone and are now seeing an icon instructing you to connect to iTunes (Recovery Mode), you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
How do you fix a screen with colored lines going down left side
my HP DV6 notebook has a dark spot going half way down screen and red,green,blue lines on left side of screen,how do I fix this, some have said I could maybe replace cable in the hinge area on left side, I am a senior citizens, is there a utube showing how to do this, if you think this is my problem , help
Hi @gloriacarsale2 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and LCD screen giving you an issue. You could reset the BIOS with this document selecting the reloading the BIOS default settings.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
how do i fix my ipod touch 4 g ios screen?
I've been having problems with my Ipod fo rmonths now. It just stopped on day and isn't responsive. The screen is black and when I press the home/start buttons nothing happens. Only the Voice Over comes on and says 'Ipod Touch Image'. I don't know what's wrong.
I tried updating the software and restoring. But the restoring doesn't work. I may just have to buy a new one, but didn't want to. Maybe I should call tech support as well. -
How do i fix my screen its somehow turned sideways????
hi how do i get my screen to go back to normal somehow it flipped and now it is sideways i have to turn it on the side to read what is on the screen and i don't know how it happened or how to fix it can you please help me fix it i use this for school and to talk to my parents when im away from them please help me thanks
Hi,
What is your machine and its operating system ? Please try this first:
Ctrl + Alt + <left arrow> (or <right arrow> depending on which way).
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do I fix Black screen?
Hi Guys,
yesterday when i was updating some Apps on my Iphone 5, my screen went Black. The phone is "on" but I cannot see anything on it at all. How do I fix this?Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Window setup option on the boot menu after fixing Blue Screen Errors
Hello Everyone, this is my firs t request.
I spent two days fixing the Blue Screen Errors (BSoD) on my computer but one thing keeps bothering me is that everytime I start or reboot my computer, it gives me TWO OPTIONS; 1. windows xp home edition 2.windows setup (default). I want to disable the second option. I had attempted to re-install windows but later changed my mind, and found an alternative to fix the Blue Screen Errors. I believe the reason Blue Screen Errors (BSoD) showed up was that I had created a new user profile and copied over old user profile files so improperly that it duplicated drivers, and gave me a list of STOP errors with blue screens for both new and old users.
The bootini file currently shows:
[Boot Loader]
Timeout=5
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
Does anyone know what to edit for the bootini file so that I don't get two options at the startup??? My system details are:
IdeaPad, S10-4231
Windows XP Home Edition SP3
4-year old
Thanks,
Lenovo UserHi
Welcome To Lenovo Community
As per the Default Sample of Boot.ini the default value after timeout section needs to be modified
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
Before making any changes please save a copy of Boot.ini
Save a Backup Copy of Boot.ini
<script type="text/javascript">//
loadTOCNode(2, 'summary');
// </script>
Right-click My Computer, and then click Properties.
-or-
Click Start, click Run, type sysdm.cpl, and then click OK.
On the Advanced tab, click Settings under Startup and Recovery.
Under System Startup, click Edit. This opens the file in Notepad ready for editing.
In Notepad, click File on the Menu bar, and then click Save As.
Right click in an empty area of the Save As dialog box, point to New in the context menu, and then click Folder.
Type a name for the new folder, for example temp, and then press the ENTER key to create the folder named temp.
Double-click the new folder named temp, and then click the Save button to save a backup copy of the Boot.ini file.
Please try modifying the following
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
to
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follo @LenovoForums on Twitter! -
HT1459 how to permanently fix white screen after resetting and restoring
How to permanently fix a 'White Screen" after resetting and restoring? 2nd generation ipod
There are two different resets. The reset you did involved holding the sleep/wake & home button.
The other reset will do exactly what it says. That reset is located in Settings - General - Reset.
Maybe you are looking for
-
Apple ID for iCloud on iPhone is obsolete
I just upgraded my iPhone 4S to iOS7.0.2. I changed my Apple ID a few months before when my email address changed. When looking under Settings > iTunes & App Store, my correct Apple ID shows. However, under Settings > iCloud, it shows my old Apple ID
-
How I got my Nano 1st gen to update and work
I just got my iPod nano 1st gen today (refurb) I plugged it in......and got nothing but the flashing folder. I couldn't get it to restore or update...each time I got an error saying a file was in use or a 1418 error. Disk Utility wouldn't recognize t
-
Hi Advantage in profit center and financial statement? can any body explain me what exactly Thanks
-
HT201359 I have downloads that won't download. I want to delete them
I have tv downloads that won't load so I want to delete them. I can't update my iPad without doing this.... Help!
-
How to install Oracle Apps Server (Discoverer 10g)
Dear All, Can you tell me from where I can find the steps of installation and config or Oracle Application Server 10g (Discoverer 10g). Aqeel Nawaz