How do I fix camera shutter that will not open?

Learning to work with the I Pad...newbie. Camera stopped working, I think shutter has frozen. How do I fix this?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Similar Messages

  • I have restored my iphone but camera shutter still will not open/work, i have restored my iphone but camera shutter still will not open/work

    I have restored my iphone but camera shutter still will not open/work

    Try closing the Camera app completely and see if then works when you re-open it : from the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • How to deactive a CS3 program that will not open?

    I have and old computer with this adobe package installed on it.  The hard drive failed and the computer wouldn't boot up.  I purchased a new computer and installed the adobe package on it.  I call adobe support and was able to activate the programs.
    Recently I decided to try to get the old computer to work by formating the hard drive.  I got it to boot from the original windows xp disk. Because the CD drive on the computer does not work, I was using an external CD drive.  I am still having trouble formating the hard drive with the external CD drive.
    When I tried to open Photoshop on the newer computer I got the following message.
    " You cannot use the product at this time.  You must repair the problem by unistalling and reinstalling this product of contacting your IT administrator or adobe customer support for help."
    I am assuming that adobe sees both computers with the same serial number.  How do I get the adobe package to work on the newer computer.  I don't care if it works on the old computer.

    uninistall  it, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.
    if you need an activation count reset, contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

  • How to fix a Domain file that will not open

    We have a Domain file on our Mac Mini that will not open - iWeb keeps saying that it cannot be found, even though it is in the Library/Application Support/iWeb folder. I transferred the Domain file to my GS, and I get the same response - if I switch back to the original Domain file (on the G5), all is well. Obviously, the Domain file from the Mac Mini has gotten corrupted, but cannot determine the exact problem (though I think it may be the index.xml.gz file). I've reinstalled iWeb, checked permissions, deleted (and re-created) the associated plist files - nothing. Unfortunately, our company's web pages are in that Domain file, and cannot perform some much-needed updates. Any help that can be offered would be most appreciated!!

    Have you tried double-clicking on the Domain file?

  • Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

    Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

    You can try the script mentioned in #1 here: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
    Here's how to install a script: http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog-post.php

  • I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
    Also see:
    *https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
    *http://kb.mozillazine.org/File_types_and_download_actions
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • HT201406 how do i fix my iphone that does not do anything

    how do i fix my iphone that does not do anythig

    With the very limited information you have given, I would try a reset - hold the power button and the home button until you see the apple logo then release. Or, restore as a new device in iTunes. What does and does not your phone do?

  • TS1292 how to activat a itunes code that will not redem

    how to activat a itunes code that will not redem

    I was having the same problem with a card that I received as a gift. Finally, I realized that it's an APPLE gift card and not an iTunes gift card. They are different and one will not work for another. The Apple card is used for hardware, software, cases, headphones, etc that you can buy in store or online. The iTunes card can only be used for music, apps, videos purchased through iTunes.
    But as long as it is in fact an iTunes card, the only other thing I've read about it not activating is to wait a few days and try it again. Sometimes it takes a while for the store where it was purchased from to send the activation info to Apple and read it as a valid code. I guess it doesn't happen instantaneously when scanned at the store.

  • I have a 5min. video that will not open.Osstatus error-54 appears. Can this problem be resolved, if so, HOW?

    I have a 5 min. video that will not open the cause of which appears to be due to an osstatus-54 error. can this be resolved & if so, how?

    It means that the orignal video file is missing which is not good news. How was the file placed on the backup hard drive?  Can you select the file on the EHD and play it with Quicktime Player?  That will tell you if the backup is a good backup.
    OT

  • How can I save a page offline? the "complete" option in "save as" produces a folder w/ 36 kb files that will not open.

    the "complete" option in "save as" produces a folder w/ 36 kb files that will not open anything - can't I save the page as a single offline file?

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • I often get emails with attachments that will not open with my mac. Is there any free software to help this

    I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these

    What kind of attachment? Post an example file name.

  • I recently purchased and downloaded an app that will not open.   Who do I contact for help with that?

    I recently purchased and downloaded an app that will not open.  Who do I contact or what do I do to fix this problem?

    On what device are you trying to open it? ipod touch? iphone? ipad?
    Did you try to restart the device? Reset it? Restore it?

  • Why won't Adobe open a Pdf? Why do I pay for a service that will not open a pdf?

    Why won't Adobe open a Pdf? Why do I pay for a service that will not open a pdf?

    Maybe you could supply us with more details about what exactly you are doing, how you are doing and what you are using to do it.
    The reason I say this is because you are in the forum for Adobe Reader which is a FREE application and not a service.

  • I have a mac Book that will not open DVD's of Business Presentations.  I had my hard drive taken in to the Mac Store and had a new hard drive installed.  Since then I cannot open DVD's.  What is the application that I need, and the process. Tks

    I have a mac book that will not open up DVD's recorded with a presentation.  I install the disc in a HP / windows 7 and it works fine.  I had my hard drive replaced and since then I cannot open up DVD's.  Was there a application that did not get installed?  And if so what is the process.

    You need DVD Player. It should be in your Applications folder. If it is in there go to System Preferences>CDs & DVDs and for "When you insert a video DVD" make sure DVD Player is selected.

Maybe you are looking for

  • K9N Platinum won't recognise AM2 6000

    Hi Everyone My problem is similar to baja_83s post on 21st november. I've bought a new AM2 64 6000+ but the mobo says contact bios maufacturer. Details are; K9N Platinum A7250NMS V1.0 042506 MSI's auto update says V1.0 is the latest version. Have tri

  • Superdrive dead on MacBook pro 17inch

    I have a Macbook Pro 17' but the superdrive is not showing up. When I do reboot my mac though the last disc inserted is still spinning. I have tried a SMC reset and did not work. I have tried to press the eject button after restart and the chime soun

  • Error while calling oracle reports from another report

    Hello everyone, I have a problem running oracle reports. In one report I have a button that calls another report. There is a button for each row of the result in the first report , and i have used Srw.run_report to call the second report. My problem

  • Service Module !!

    Hello Experts, how do you rate the service module in SBO, i have one problem as my work is in distributed environment, i have got technicians who are on the field all the time with few equipments. They come office once in a while. I would like to man

  • FCExpress VS FCP (quick answer please!)

    Hello, I'm a student in Digital Media at a design school, just finished a 2 month course involving FCP. I'm not financially able to purchase FCP, but Express is within my budget. What are the major differences between them? I cant find anything that