How do i fix error 104. not enough disk space

how do i fix error 104. not enough disk space

I got same problem...
I receiving erorr after download adobe photoshop cs5.. and I can't extract the file because eror 104. not enough disk space...
I am using OS Windows

Similar Messages

Error message - not enough disk space to import

Hi all,
I was trying to import a video I have in Quick Time to iMovie in order to burn it to disc and when I tried I got an error messsage that said not enough disk space to import the movie. I have about 26 GB on my hard drive. How much do I need? Or am I going abut this all wrong? I tried to do it thru disk Utility and iDVD but it is obviously not compatible. I have iMovie 5.
Thanks for any help.
iBookG4 Mac OS X (10.4.6)

Hello Victry,
do i get this right: duration almost 2.5 hours and file size 27 MB? .... don't seem right to me - you sure it's not 27 GB? that would explain the import problem.
apart from the file size: 120 min. is the limit for a normal 4.7 GB DVD so there's either the possibility to chop the movie in two parts or burn to dual layer DVD, if you have that option.
"codecs: base, windows media audio 9/standard, windows media video 9 standard"
the file you have on your Mac uses a codec that Macs don't easily digest and can usually only handle with the help of third-party software, in this case Flip4Mac ( http://www.flip4mac.com/wmv_download.htm ). unfortunately i'm not really an expert on WMV files
i would suggest the following(assuming this file is as big as i think):
1. try to get hold of an external HDD and move the file there
2. convert with QT/Flip4Mac to DV and cut in two parts
3. import each part into separate iDVD projects and burn to DVD
hope this helps
viva la mela

Keep getting Failure to Compile Error for Not Enough Disk Space

I have burned this dvd once already, made a few changes and went to build again and it keeps telling me there's not enough disk space to compile assets. There is over 15GB of free space for a 2.8GB project, what am I doing wrong?
Any help would be great, this is a wedding gift and Im running out of time!!!!

15Gb isn't all that much, really - especially if you are making a DL disc. In order to create the files necessary there needs to be enough space for the final output, plus the same again for the build files, plus enough temporary space and room for encoded media and so on. If your project is 8Gb in total, you won't have enough space with 15Gb free!
Try to clear another 5Gb and make sure all of the space is on an internal drive, then have another go.

Error Message, Not Enough Disk Space...

Heres the problem I ripped a copy of a City Council Meeting from a dvd to my iBook, the file is 483mb on disk, I have 11 gigs available, when I try to import it into iMovie to get only the sections I need, it says I do not have enough disk space, how is that possible and is there a workaround?
Edit: I am on the road and only have my iBook with me.

Does iMovie HD support MP4 files directly? If not then it wants to covert the file to a full DV format file. As I said before, this is 13GB per hour, it is a time thing and it doesn't matter if your original file is 200MB, 400MB, or 1MB. If it is an hour it needs 13GB. If it is longer that an hour, it will need even more drive space.
So how long is the movie?
If iMovie HD does support MP4 files directly (I think iMovie 6 does) then when you start the new project are you telling it to keep it in MP4 format or are you opening the new project as a DV project, where it will want to convert anything imported into DV format?
Patrick

Keep getting error 101 not enough disk space

I have tried downloading the trial for cs6 using Chrome and Firefox and I get the same error from the download assistant. I have plenty of disk space so that isn't the problem. Please help!

I have plenty of disk space so that isn't the problem.
It could be. The download assistant has issues with large partitions over 1TB. So in fact you may have to downsize. Anyway, you're not providing enough info to be any more specific.
Mylenium

What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
"not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
I have read the help info on computer but hasnt proved helpful.
Any suggestions?

iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive. How much free space do you have?

Not Enough Disk Space while installing WebLogic 6.1sp1 on AIX

While installing WebLogic Server I get the error message "Not Enough Disk Space"
for the root (/) file system, although I am trying to install it in the /weblogic
file system that has enough space for the installation.
What is that extra info that I need to pass to the installer so that installs
the server in /weblogic and not complain about lack of disk space in /.
The relevant properties for installation under silent mode are as listed below:
### BEA Home Directory
BEAHOME=/weblogic/sftw
### Product Installation Directory
USER_INSTALL_DIR=/weblogic/sftw/6.1
Thanks and Regards
Kapil Singh Pawar

Hi.
I believe the installation creates temporary files in the /tmp directory from root.
If that is part of your root file system then this may be the cause of your problem.
Try changing your environment variable TMPDIR or TMP_DIR. If you are doing the
silent install with the java command line try setting java.io.tmpdir to a different
filesystem on the command line.
Hope this helps,
Michael
Kapil Singh Pawar wrote:
While installing WebLogic Server I get the error message "Not Enough Disk Space"
for the root (/) file system, although I am trying to install it in the /weblogic
file system that has enough space for the installation.
What is that extra info that I need to pass to the installer so that installs
the server in /weblogic and not complain about lack of disk space in /.
The relevant properties for installation under silent mode are as listed below:
### BEA Home Directory
BEAHOME=/weblogic/sftw
### Product Installation Directory
USER_INSTALL_DIR=/weblogic/sftw/6.1
Thanks and Regards
Kapil Singh Pawar--
Developer Relations Engineer
BEA Support

Not enough disk space for asset ecoding

Hi all,
I have a dvdsp project with:
a feature: 3.3 gb
dvd extra: 289
menu assets: 65mb
and shows that it is 3.8 mb all together, but when i try to build/format it stops the build at the menu and gives the error message: Not enough disk space for asset encoding. I was running a test build when this happened. i have yet to add the audio for the extra thinking i still had some room on here to work with.
I have burned dvd's up 4.5 without any issues. any ideas why this is happening?
thanks,
Mark

I'm having the same problem. Except I have tried to switch locations for the Current Build and each time it says Not enough disk space for asset encoding. I have a 500GB raid with almost 400GB free and then another 500GB raid with about 130GB free. I really need help on this pronto!
Another message it now brings up after it starts Encoding Assets: Insufficient disk space for encoding. Please free up disk space on your encoding target drive. Please Help!!
Message was edited by: PapaSnowSmurf

FCP X version 10.1.1. When Sharing to DVD I get the following alert " There was an error burning your discd. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? how can I fix this problem? not space prob

Sharing to DVD I get the following alert " There was an error burning your disc. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? How can I fix this problem? This is definitely not a space problem.
Since starting with FCP X, there has been tons of issues, now that the product actually works with the exception above, makes it impossible to share the production. Has Apple fixed this problem. is there a knowledge base article on this?
On another note, One reason I have not purchased support on FCP X is because you sold a product that never worked for almost an entire year or more.   Now I can finally finish my project, I cannot share it.....Really. This has to be fixed now, I am loosing money as I typed this.
Regards,
Rob Harris

Just curious, why would repairing permissions, rebooting ( rebooted 2 times already today) or creating a new user possibly fix this.
I cannot create a new user, that is way too much work. I will repair permissions again, I repaired permissions just a few days ago. Then I will reboot, login and turn off App Nap and rerun the Share DVD.
There must be something seriously wrong with the OS if your are suggesting creating another user.   WOW!
Rob H.

Has anyone received an error or "there is not enough disk space to complete that operation" when trying to export a photo? If so, how did you fix it?

Has anyone received an error message of "there is not enough disk space to complete this operation" when trying to export a photo from iphoto? If so, how did you resolve it?

How much free disk do you have? How many and what size of photos do yu have that you are trying to export?
LN

Not enough disk space error - but not rea

I have a Nomad Jukebox 3 - no really. It runs like a champ!? I use it most often for recording 44KHz audio. I just did the auto-update thing for the mediasource and plugins, blah blah blah. Now I can't sync a large recording (about .4GB)?to my computer. It gives me this error:?There is not enough disk space at the destination for this transfer. this is obviously a bug because it was working before the update. Please HELP!!

I have the same problem - a Jukebox 3 which usually refuses to transfer files over about a gig.
My old system disk was 30Gb, and it always worked OK with that, but when I reinstalled everything on a 20Gb disk, I got problems. I slightly suspect it may get confused when it checks for disk space by a disk that's a lot bigger than was available back when the Jukebox 3 came out. If anyone knows how to fix this I'd be most grateful - last time I had to record the audio in through my soundcard!

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

"Not enough disk space" error installing XP SP3

Just installed Bootcamp on a MacBook Air running 10.5.3. (Actually, it was a reinstall on an XPSP3 partition that began refusing to boot.)
Bootcamp install went fine. XP Pro SP2 install also normal.
Installed my standard suite:
- AVG Free virus protection
- Firefox
Ran Windows Update. Got XP SP3 downloaded. Got this error on SP3 installation:
There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall$ to install Service Pack 3 Setup requires an additional 4 megabytes of free space or if you also want to archive the files for uninstallation,Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again.
There's 7 GB free out of a total of 11 on the Bootcamp drive.
Tried Add/Remove programs. I'm getting the option to remove just a handful of stuff, including Firefox and AVG. (No surprise, since that's just about all that's ON the drive at this point.)
BTW, Bootcamp is fully up-to-date thru Apple Software Update utility in XP.
***?

It has been mentioned in various threads, since SP3 came out, but here is the fix:
http://www.windowsreference.com/general/error-there-is-not-enough-disk-space-whe n-installing-sp3/

Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

HELP puhleeeeze!
This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already.
What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now! When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
Now here's the kicker:
If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac via the ethernet network, files can copy with no problems. But any USB connection - I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

Hello everyone,
Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him. I will ask him again if the problem has come back.
If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
Cheers,
B

How do i fix error 104. not enough disk space

Similar Messages

Maybe you are looking for