How do i fix error 28 when trying to recover my iphone?

how do i fex error 28 when im trying to recover my iphone, i recently dropped it, and it went straight into recovery mode and ever since that it will not recover. HELP!

Most likely, error 28 means there is hardware damage to the phone that can't be fixed by software methods. There are other possible causes, but the relationship to dropping the phone makes those less likely.
"Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors."
http://support.apple.com/kb/TS1275

Similar Messages

HT201210 when trying to recover an iphone, anyone know how to fix an error 21?

when trying to recover an iphone, anyone know how to fix an error 21?

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

How do i fix error code 1611 and restore my iphone 4

how do i fix error code 1611 and restore my iphone 4

The music continued to play with the iPod?
If so, when a call is received while listening to music with the iPod, when the call is answered the music should be paused. When ending the call, the music starts playing again from where is was paused.
There is no automatic mute with notifications for received email or messages while on a call and there is no setting for this.

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Error when trying to recover files

I'm getting a "No Backup servers found" error when trying to recover files from my Azure backup vault. Any ideas folks?

Hi,
Please login to Azure Portal and check if you are able to see other servers from which you have backed up data, in the Portal.
Also, prerequisites for recovering file and folder data to a different server are:
· The target server is registered with the same Backup Vault the source server was backed up to.
· You have the passphrase used to encrypt the data from the source server.
Regards,
Manu Rekhar

Error when trying to recover datafile from standby database to primary

hi friends,
getting problem with restoring datafile from backupset taken on standby database to primary database.
os: windows server 2003
db: oracle 11gR1(11.1.0.6)
i've configured standby database on two different hosts.
host1 - primary (db_uinque_name= prod)
host2 - standby (db_uniue_name= prodsby)
I've configure both database with recovery catalog. I take backup on standby database. users' datafile of primary database has been lost.i'm trying to restore from the backupsets taken on standby database.
with the help of - http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJCEFEG
on primary
c:\>rman target sys/password catalog rcat/password
rman>list backup for db_unique_name prodsby;
display the backupsets
rman>restore datafile 4;
Starting restore at 06-NOV-08
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1051 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 12:12:18
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
also use to tag to restore the datafile
rman>restore datafile 4 from tag='base0_prodsby';
Starting restore at 06-NOV-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 11:27:21
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
i'm getting above errors when try to restore the datafile.
when i issue the following command.
BACKUP AS COPY DATAFILE 4 AUXILIARY FORMAT 'C:\app\Administrator\oradata\prod\USERS01.DBF';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
please friends, try to help me to solve the problem.
Thanks,
Vihang

hi.
Its not necessary its a otherway around to recover datafile from this backupset and apply archivelogs to make datafile consistent.
yes, it ain't the right way to restore backup to primary location.
so how would i connect to standby database with primary and recovery catalog.
i need to connect to recovery catalog and primary site because i need to restore to primary location and recovery catalog contain all metadata and backupsets related information.
i also tried the following steps from oracle documentation.
Connect to the standby database as the target database:
CONNECT TARGET sys@standby
You are prompted for a password:
target database Password: password
Connect to the primary database as the auxiliary database:
CONNECT AUXILIARY sys@primary
You are prompted for a password:
target database Password: password
Back up the datafile on the standby host across the network to a location on the primary host. For example, suppose that /disk1/df2.dbf is the name of datafile 2 on the standby host. Suppose that /disk8/datafile2.dbf is the name of datafile 2 on the primary host. The following command would copy datafile 2 over the network to /disk9/df2copy.dbf:
BACKUP AS COPY DATAFILE 2 AUXILIARY FORMAT '/disk9/df2copy.dbf';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
getting this error.

Error when trying to book an iPhone in for service (addrapi.08)

Hi all,
I've been trying to book an iPhone in for service via the Apple Support site for a few weeks now because my nearest Apple store is about an hour and a half away. Every time I try and do this I get this error after clicking continue after doing the my address section.
"Service is not available in this location. Please choose another solution (addrapi.08)"
I've had to book another iPhone in for service before and never had this error, and I've also tried doing it from another PC with a different IP etc.and I get the same issue.
Any help would be appreciated as I need to get my phone sorted
Thanks

SamWorth23 wrote:
Hi all,
I've been trying to book an iPhone in for service via the Apple Support site for a few weeks now because my nearest Apple store is about an hour and a half away. Every time I try and do this I get this error after clicking continue after doing the my address section.
"Service is not available in this location. Please choose another solution (addrapi.08)"
I've had to book another iPhone in for service before and never had this error, and I've also tried doing it from another PC with a different IP etc.and I get the same issue.
Any help would be appreciated as I need to get my phone sorted
Thanks
I'm going to assume base off that message is that whatever you need done to your iphone - that location doesn't do that kind of service.

How to fix errors when trying to erase an old external drive?

I have an external drive I used to use on my windows machine, which I wanted to erase and start using on my mac.
When I plugged it in to my windows laptop, the drive was there and I could access files.
I plugged it into my iMac and again I could see the drive and the files.
I went to disk utility and tried to use the erase feature. I got some errors and retried. The last error was 'file system formatter failed'.
Now the drive appears to be invisible on both the mac and the windows laptop! Is there anything I can do?
Veronica

I agree with dianeoforegon the drive sounds like it is dead or dying, to be more specific it sounds like it is suffering from 'bit rot'.
You could try going to the partition tab in Disk Utility and making sure it is on GUID and not MBR or APM, then set it to a single partition and try to format it. Also you could try the security option in the erase tab to force it to write to each block as a test. The lowest level is to do no security erase but the next level up will make it write once to each block, this will be sufficient to make it test each block.
Disk formatting utilities are supposed to be able to detect bad blocks during formatting and to mark them bad and to use 'spare' blocks. Unfortunately Apple's Disk Utility seems to be totally useless at doing that. Even if you have a tool which can do this it is not wise to trust a drive with lots of bad blocks (a handful might be ok) as a large number is a sign the problem is spreading hence the term 'bit rot'.
The only tool for Mac I have seen which even attempts to map out bad blocks is Scannerz from SCSC.

Error when trying to download on iphone 5

account not in this store on iphone, it say's it's looking in the French store. However, I am in the U.S,A,
I've looked in Itunes under account settings to no avai other than the country setting witch was already set
to US.

ianAPOC wrote:
I am currently running Leopard 10.5.5, and i'm trying to update to 10.5.6 so I can install iLife '09, however i'm getting an error message that simply says I do not have sufficient access privileges.
however, my account is the only one of my laptop, and therefore is the Admin account. Any idea how to fix this problem? I searched in the forums for this particular problem, and found one case, but I had no idea what the guy said on how to fix it.
Your subject says you have an error downloading the update, not installing it. Are you able to download the update or what?

HT201210 why do i get an unknown error when trying to restore my Iphone 3GS,

i was informed (by app store icon i had apps that needed to be updated ,
i said ok to the 2 updates ,
the phine then asked me (as usual) to insert my pass word
it said i had used wrong pass word and re-enter it which i did
this then set my phone to keep switching itself on and off repetedly
i tried to switch off the phone using the power button butg at first this did not work,
i then pressed reset (power button and home button, as requested in the user guide
my phone then came back on with the itunes and usb logo tgelling me to connect to itunes to do a restore ,
after the phone tries to update itself with the download
although the phone trys to reboot and use the down load it just keeps disconnecting fron my computer
and itunes come back with an error message telling me it cannot make contact with the phone
there are no other fixes on your site
so now my phone is out of warranty it is now useless
i had though of upgrading to an iphone 4S but am now thinking do i want to do that now this has happened
maybe its time to go back to android also recently bought an IPAD touch which up to now is fine
but not sure if i should keep this as ive never had this happen to me before and the phones are so expensive
my old galaxy android phone still works fine , so ive now put my sim card in there and works fine after 5 years continuous use
what would you suggest i do now
what will you do to make me stay with apple ????
Mr walter Dickson

Have you tried to download anything else?

Permissions error when trying to recover a package

The error: The operation can’t be completed because you don’t have permission to access [file]
I have been using a writing program called Scrivener which has a package with many files. That I kept open nearly all the time (including when Time Machine did its backups).

First, ProxyServer's source code must start with the line...
package com.davidflanagan.examples.net;
Next, you must have a directory structure that matches the package name - a directory named com which contains a directory named davidflanagan which contains a directory named examples which contains a directory named net and ProxyServer.class must be in the net directory,.
Next, the directory that contains com must be in your Classpath when you execute ProxyServer.
To execute ProxyServer, use "java com.davidflanagan.examples.net.ProxyServer"
http://java.sun.com/docs/books/tutorial/java/interpack/packages.html

I get an internal device error when trying to sync my iphone 4

Every time I connect I either get a message from iTunes that it doesn't recognize the phone or it tries to sync it and can't ending with an internal device error message.

I had the same problem. I got it working a few hours after setting up the account. Go to the firefox button and click sync now. This solved the "Failed Server Lookup" issue for me.

Error when trying to recover hard drive

Greetings all! I am hoping that someone can help me out on this. I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.
I am far from a novice when it comes to computers but I have no idea why this is not working when it worked before. Any help would be greatly appreciated.
Thanks!

The 1.5 GB partition had the Windows recovery enviroment on it, not the factory image. The factory image is like 5 or 6GB.
Are you running recovery off discs or by pressing the zero (0) key after powering on?
Have you upgraded the memory on this unit?
This signature left intentionally blank.

I get an error when trying to backup my Iphone 6 in itunes to my computer?

IOS 8. 02, iPhone 6. My device will not backup in itunes to my computer. I successfully backed up before updating to IOS 8.02. Now I get an error saying iphone was not backed up because itunes could not back up to this computer. I have over 300 GB of free hard drive space so that is not the issue. I have removed older backups. Any suggestions?

Hi blkone35,
If you are having an issue with doing a backup of your iPhone using iTunes, you may want to troubleshoot using the steps in this article -
iOS: If you can't back up or restore from a backup in iTunes
Thanks for using Apple Support Communities.
Best,
Brett L

Error when trying to sync my Iphone 5c

I have always been able to sync my iPhone 4. I just got the new 5c and so did my partner. I created her a iTunes account on same laptop. I am logged into my iTunes, I try to sync and I get error message. It wont recognize my device. It shows my phone and all content on it. What's going on!!!!

https://discussions.apple.com/thread/4028664?tstart=0

How do i fix error 28 when trying to recover my iphone?

Similar Messages

Maybe you are looking for