How do i fix error 54 with airplay

I have a new MacBook Pro with Mountain Lion. I am trying to mirror to my Apple TV. I enter the passcode and I get the following message:
An error occurred (54) while connecting to the AirPlay device "Apple TV" "Make sure the device is connected and powered on and try again"
The unit is on. How do I fix this problem. both the Apple TV and Macbook Pro have the latest updates

Hello,
First, make sure you use the channel names and numbers as in the Measurement and Automation Explorer (MAX). If you already do, then doing the acquicition on those channels in MAX and see if that works. From there, I would then check the example vi to make sure the channel settings match those in MAX.
Here are some documents that will help you troubleshoot this error further:
How Do I Handle the DAQ -10001 Error?
Error -10001 When Using Virtual Channel and Remote Device Access (RDA)
Why do I Receive Error -10001 with the AMUX-64T when Reading Multiple Channels in LabVIEW?
AI Group Config Error 10001 using Virtual Channels
Hope this helps.
Zvezdana S.
National Instruments

Similar Messages

How do I fix errors with the daq being "reserved"?

I'm trying to read from the DAQ in a program, and in the program there is a large while loop that runs two smaller while loops. The smaller ones exit when a value read from the DAQ is a voltage higher than 1 volt. When I had only one smaller loop, I was able to read the values just fine, and It would exit as expected, but when I added a second, almost duplicate of the first loop, I began to get errors saying that the device was reserved and now niether loop can properly detect the value comming in from the DAQ.
How can I change the properties of the task or the read function so that it will not be "reserved"?
Thanks

To read teh data that is being acquired inside a while loop, You will have to pass data using a global variable
use a parallel loop and a global vatriable
look at attached example
Regards
Dev
Attachments:
pass numeric.llb ‏25 KB

How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)

http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

HT2305 HOW DO I FIX ERROR 43 FOR MY iPOD CLASSIC ?

HOW DO I FIX ERROR 43 FOR MY iPOD CLASSIC ?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

How i can fix error 9806 in itunes ?

how i can fix error 9806 in iTunes ?

You can't. Error 1015 occurs when trying to restore a jailbroken phone.
Jailbreaking your phone voids any warranty remaining with Apple and forfeits your right to any assistance from Apple including from this forum.
You're on your own. From what other people have posted, it's extremely unlikely you'll ever get your phone working again.

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark

HT3743 how i can fix error 1015 in my 3g , pls help,,

how i can fix error 1015 in my 3g , pls help,,

You can't. Error 1015 occurs when trying to restore a jailbroken phone.
Jailbreaking your phone voids any warranty remaining with Apple and forfeits your right to any assistance from Apple including from this forum.
You're on your own. From what other people have posted, it's extremely unlikely you'll ever get your phone working again.

TS3694 how do i fix error 1015?

HOW DO I FIX ERROR 1015 ON IPHONE 3G?WAS RECOMENDED I DO A RESTORE TO BE ABLE TO ADD APPS BUT IT WONT UPDATE AND KEEP GETTING THE 1015 ERROR MESSAGE.

we can't give help with jailbroken phones here, try the jailbreak websites.

TS3694 how do i fix error 3014

how do i fix error 3014?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

TS3297 how i can fix error 1015 when i restore iphone 3g ?

how i can fix error 1015 when i restore iphone 3g ?

You can't. Error 1015 occurs when trying to restore a jailbroken phone.
Jailbreaking your phone voids any warranty remaining with Apple and forfeits your right to any assistance from Apple including from this forum.
You're on your own. From what other people have posted, it's extremely unlikely you'll ever get your phone working again.

TS3694 How do I fix error 1669?

How do I fix error 1669?

I Had same issue, my story starts with lost carrier network, tried following
rest network, all network
power off and back on
change SIM card
then did back up and tried to erase, but it asked me to turn off the FIND MY IPHONE app, it never turn off, I tried 20 times, I have right password as I can log in icloud.com with that password. So i was helpless and I had to erase iphone through icloud.com. After that I tried to restore it, it gave me message that can not activate iphone contact Apple Customer care. went apple store they tried all, finally came to me with "connect to itune" screen and said hardware failure, pay $269 for replacement. I denied, came home and tried to restore it again, it was trying to restore, but about 1/3 left and show error 1669.. then tried multiple times, with other computer, older itune version, no success
I think its not hardware, something in software , as it was atleast was on (with Searching network Problems),,, they are not just accepting it ,,,, I am moving to Android ,,
Please post anybody has success to get rid off Error 1669. thanks

TS3212 How do I fix "error 7" when installing I tunes?

How do I fix "error 7" when installing I tunes?

Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

Hello drews,
To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer. To do this, please follow the steps below:
ASF / Paper Output Slot
Turn off the printer.
Remove paper from the ASF.
Gently pull the jammed paper out.
If paper is visible from the ASF, use both hands to pull the paper out slowly.
If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
Note : Be careful not to touch the components inside the printer.
Turn on the printer and confirm that the Alarm light is off.
(If the jammed paper remains in the printer, the paper may be automatically ejected.)
Load paper back into the ASF.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Paper jams inside the printer
Turn off the printer and disconnect the power cord and USB cable.
Remove the jammed paper slowly using the following procedure.
Open the rear cover to check if the paper is jammed.
Pull out the cassette and check if the paper is jammed inside the cassette area.
Stand the printer with the rear side down, holding the document cover.
Press the tabs together and pull the green cover toward you.
Check if the paper is jammed.
(If you were not doing Duplex printing, you do not have to follow this procedure.)
Close the green cover and place the printer back to a normal position.
Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
Load paper back into the ASF or cassette.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Clearing credit card-sized paper jammed inside the printer
Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
Turn off the printer.
Load the same paper type that is jammed inside the printer in portrait orientation.
Power on the printer.
The paper stock in the ASF will automatically feed the jammed paper from the printer.
To resume printing, load the paper in portrait orientation.
If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
Turn off the printer.
Open the rear cover.
Fold in four a piece of letter-sized plain paper.
Push in the folded paper until it hits the jammed paper.
If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
Pull out the folded paper and close the rear cover.
Power on the printer and confirm that the Alarm light is off. The jammed paper should automatically eject.
To resume printing, load the paper in portrait orientation.
If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, unfortunately, the printer will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

TS3694 how do i fix error code 1015

how do i fix error code 1015 my iphone 3g will not start up it come up with connect to itunes sign and when i try to restore it it comes up with error code 1015

Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

How do I fix error 16 n cs5.5 indesgn

how do I fix error 16 n cs5.5 indesgn

If the knowledgebase article doesn't help you may need to uninstall and reinstall.
If it comes to that, after uninstalling run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3), then run MSConfig and turn off all unnecessary starup items and services, especially antivirus and malware scanners, third party firewalls, browser helpers and toolbars, iTunes and messengers and reboot before running the installer again. You can run MSconfig again after the install to return to normal startup.
In addition, make sure the default printer is a local printer, not a network printer, the first time you try to launch ID.
Do you have any odd configurations for the system, like a small ssd with the OS and a second drive where you install programs?

How do i fix error 54 with airplay

Similar Messages

Maybe you are looking for