How do I fix error code 0x80092013 please?

I have uninstalled and reinstalled iTunes and I am still getting this same error code

To totally remove iTunes you should follow these instructions, http://support.apple.com/kb/HT1923 Try it again then give it a try. 

Similar Messages

  • How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

    how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810 

    Hello drews,
    To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer.  To do this, please follow the steps below:
    ASF / Paper Output Slot
    Turn off the printer.
    Remove paper from the ASF.
    Gently pull the jammed paper out.
    If paper is visible from the ASF, use both hands to pull the paper out slowly.
    If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
    If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
    Note : Be careful not to touch the components inside the printer.
    Turn on the printer and confirm that the Alarm light is off.
    (If the jammed paper remains in the printer, the paper may be automatically ejected.)
    Load paper back into the ASF.
    Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
    Top
    Paper jams inside the printer
    Turn off the printer and disconnect the power cord and USB cable.
    Remove the jammed paper slowly using the following procedure.
    Open the rear cover to check if the paper is jammed.
    Pull out the cassette and check if the paper is jammed inside the cassette area.
    Stand the printer with the rear side down, holding the document cover.
    Press the tabs together and pull the green cover toward you.
    Check if the paper is jammed.
    (If you were not doing Duplex printing, you do not have to follow this procedure.)
    Close the green cover and place the printer back to a normal position.
    Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
    Load paper back into the ASF or cassette.
    Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
    Top
    Clearing credit card-sized paper jammed inside the printer
    Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
    If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
    Turn off the printer.
    Load the same paper type that is jammed inside the printer in portrait orientation.
    Power on the printer.
    The paper stock in the ASF will automatically feed the jammed paper from the printer.
    To resume printing, load the paper in portrait orientation.
    If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
    Turn off the printer.
    Open the rear cover.
    Fold in four a piece of letter-sized plain paper.
    Push in the folded paper until it hits the jammed paper.
    If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
    If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
    Pull out the folded paper and close the rear cover.
    Power on the printer and confirm that the Alarm light is off.  The jammed paper should automatically eject.
    To resume printing, load the paper in portrait orientation.
    If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on.  If the error persists, unfortunately, the printer will require servicing to resolve the issue.  Please click on the Contact Us link below to obtain your servicing options.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I fix error code 403?

    How can I fix error code 403?

    Hi Roiby,
    We need more information regarding the error you mentioned here?
    Please have a sahre with what actions, what changes on the PC recently, check into event viewer and see if related logs we could found out.
    Further, if this is related with Windows update, you may take a look at hte folloowing article:
    "Error 403 Access Denied/Forbidden" occurs when you connect to Windows Update
    Best regards
    Michael Shao
    TechNet Community Support

  • How do I fix error code 1406 when downloading Adobe Reader

    How do I fix error code 1406 when trying to download Adobe Reader, using Windows 7 Pro, 64 Bit.

    Hi ldpowell44
    Plesse refer the below Document : http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html

  • How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    Steve,
    I appreciate your answer.  While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
    With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
    Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change.  Yes, it might work.  The "might" is the part that makes me hesitate.
    Is anyone else out there on OS 10.7 and running Acrobat 9 Pro?  Any issues with anyone else?
    Thanks Steve.  I do appreciate your offering a solution.  I may end up trying it if nothing else comes together.
    Mark

  • TS3694 How do i fix error 3194? please help!

    How do i fix error 3194? please help!

    iOS of your iPhone could be modified / hacked. No one will be able to support you in this Forum.

  • How do i fix error code n8109 on netflix?

    how do i fix error code n8109 on netflix?

    Netflix uses Silverlight for content protection, so I would start by uninstalling that, then reinstalling it.
    Uninstall Silverlight: https://www.microsoft.com/getsilverlight/get-started/install/removing-silverligh t-mac.aspx
    Reinstall Silverlight: https://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    Also I would run through these Steps to tune up your machine.
    ..Step by Step to fix your Mac

  • TS3694 how do i fix error code 1015

    how do i fix error code 1015 my iphone 3g will not start up it come up with connect to itunes sign and when i try to restore it it comes up with error code 1015

    Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

  • TS3694 how do i fix error code 3194

    how do i fix error code 3194

    Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

  • How do I fix error code 1402

    How do I fix error code 1402?

    These errors occur when the Windows installer cannot successfully modify the registry. Quick solutions:
    Repair the current program installation using Add/Remove Programs in the Control Panel.
    Log in as administrator and access the appropriate registry key:
    (Acrobat) HKLM\Software\Adobe\Acrobat
    (Reader) Reader\<version> HKCU\Software\Adobe\Acrobat Reader\<version>
    Update the program again.
    See also:
    Error 1402 | Error 1406 | Acrobat, Reader

  • How do i fix error code 1015

    HOW DO I FIX ERROR CODE 1015

    jailbreak haiku
    Like a diamond ring
    it will glisten forever
    but make no ringtones.

  • How do i fix error code 1611 and restore my iphone 4

    how do i fix error code 1611 and restore my iphone 4

    The music continued to play with the iPod?
    If so, when a call is received while listening to music with the iPod, when the call is answered the music should be paused. When ending the call, the music starts playing again from where is was paused.
    There is no automatic mute with notifications for received email or messages while on a call and there is no setting for this.

  • How do you fix Error Code:7 (After Effects CS5)

    After a few minutes of working with any simple effects or presets in Adobe After Effects CS5 I will get this error below every time:
    "Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7"
    Once this pops up I have to close the program without saving. Why am i receiving this error and how can I fix it? By looking at the specs below of my laptop I can't understand how I could get an error saying that my configuration does not meet minimun specifications.
    Here are my computer specs:
    Lenovo IdeaPad Y570
    Intel i7-2670QM 2.20GHz
    8 GB RAM
    Windows 7
    NVIDIA GeForce GT 555M with CUDA & dedicated 1GB RAM
    NVIDIA driver version 8.17.12.6844

    Turn off your onboard intel graphics chip in the BIOS or configure your Optimus driver accordingly. Seems like AE is switching the graphics driver in the middle of things or the wrong one is used to begin with (that is the weaker intel chip). also simply updating all drivers may make the problem disappear.
    Mylenium

  • How do I fix error code 150:30.  "photoshop license stopped working"????

    All of the sudden when I was trying to open AI I got a screen with "Illustrator Licensing for this product has stopped working",  and error code: 150:30 how do I fix this?
    I am on MAC OS X 10.9.4 and Illustrator and Photoshop CS4.
    Thank you for your help!

    This is the one step I did not take as I am a bit unsure of where to find the start up disk
    On your startup disk, locate and delete the following folder: 
    [hard drive]/Library/Application Support/FlexNet Publisher/
    Important: The path above points to the Library folder at the root of your startup disk, not the Library folder in your user home folder.

  • How do i fix error code 205 when installing

    How do i fix this pls reply

    Error 205 means: When segment validation fails again and again, the file is assumed to be invalid. Please refer to: Error downloading, installing, or updating Creative Cloud applications
    Regards
    Rajshree

Maybe you are looking for

  • Backing Up Requires Too Much TIme

    I have been messing around with iTunes for the past 6 hours. When I talked to an associate they encouraged me to download the new iTunes. In return I am currently having to wait hours for my iPod to be "Back uped." I found some helpful hints online a

  • Face and Eye Tracking with LabView and Vision

    Hey all, For my senior project I am trying to perform face tracking and eye tracking by using LabView and the Vision Development Module. Unfortunately I am new to LV and I'm drowning in a sea of links and tutorials so I was wondering if anyone here t

  • Post Processing Framework

    Hello Everyone, I am new to Netweaver 2004s and am working on an outbound interface through IDOC generation. I don't have an idea about the new "Post Processing Framework" concept but do understand that it closely resembles the regular Output Determi

  • My company is investing into shares, how to handle this in sap?

    Hi Gurus, How share market investments can be handled in SAP Asset Accounting module? thanks, Ganesh.

  • Returning Business Objects to View?

    All, I was just in a meeting where two different approaches to returning data to the view were discussed. In a nutshell, here are the two options presented: 1) The service layer should return the Business Entities entirely (which happen to be Hiberna