How do I fix it when an album won't play on my ipod but will in itunes?

How do I fix it when an album won't play on my ipod but eill in itunes?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

How do I fix my iPad if it won't upgrade to iOS 5? I have iTunes on here and every thing else I need what do I do?

How do I fix my iPad if it won't upgrade to iOS 5? I have iTunes on here and every thing else I need what do I do?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Album Art is making me crazy! Won't stay attached in iPod but ok in iTunes!

1.Some of my Album Art is imported from iTunes, some is copied / pasted from internet since I can't get it from "Import Art" from iTunes. I also use an external hard drive to store my iTunes on. iTunes plays fine, and in iTunes, all my album art is displayed. However, several albums (only about 10 out of over 1000) show no album art at all in my iPod(s). I download it again, drag it into the window where you drop artwork and it seems fine in iTunes but again will not show up in my iPod. The image is fine as it shows in iTunes and is the same size as all my other image files I have used.
I have even deleted all the art from each individual track in iTunes which had missing art and reloaded it - same thing. This is making me nuts! Any ideas? I'm a very anal person and I want art on every track/album.
This happens on my new iPod classic 80G w/video as well as an older iPod classic which doesn't support cover flow but still shows album art.
2.On an even weirder note, if I eject/disconnect my external drive to use my laptop, when I reconnect, most of my album art is gone in iTunes. However, if I use the cover flow view to locate the albums with no art, when I get to them I press enter to play the first (or any) song on the album and as soon as it starts to play, the art comes back and then stays! This is very strange. Almost as if iTunes forgot where the art is but playing the song somehow reunites it. I don't get it.

For #1, the iPod's Artwork cache does get corrupted when making frequent changes. In the iPod's Music preferences tab in iTunes, remove the check beside "Display album artwork on your iPod" and select Apply.
Once the iPod has finished syncing, recheck it and hit Apply again. iTunes should recreate the artwork cache and re-sync it to your iPod.
For #2, are you running the itunes database (it has an ITL extension) from the exHD ? Or from the default location on your C: drive. The downloaded artwork from the itunes store goes into a folder named Album Artwork, and that is created in the same folder as the ITL file.
Not sure if this is it, since I embed the artwork in all my files.

Audio "sub-clips" won't play in source monitor, but will play when cut into a sequence.

I'm cutting an "audio only" project in Premiere and I came across a strange problem while making sub-clips. The first 6 sub clips made from the same master audio clip were normal, but then something changed, and the rest of them won't play any sound while in the "Source" window, even though while in the window the sub-clip displays a waveform.
Once edited into a sequence they play normally, but not being able to listen to the sub clips in the source monitor is annoying, and louses up my whole editing routine for this kind of project.
Any ideas as to why this is happening, or what I might do to fix it?

Number of issues here:
1. Your system does not meet minimum requirements.
2. Your CPU, disks, memory are not enough for anything other than DV.
3. What video camera was used with what codec on what OS with which version of PR. etc.
Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

Certain albums won't play on Iphone but still play perfectly fine in Itunes

Since I updated my Iphone to IOS5, certain albums won't play. They work perfectly fine in Itunes on my imac and the still appear in my library on the Iphone, but it won't start playing. The strange thing is, they are all albums from this year. All the rest is working properly.
Allready tried importing the whole library again but that was a waste of time.

Having the same problem with only a few albums.
Any news on this issue?

How do I fix iphoto when it crashes every time i try to import

How do I fix iphoto when it crashes every time i try to import

By doing stuff.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4199 how do I fix it when "another device is using computer IP address" and I can't get wireless to work anymore? It used to work fine.

How do I fix it when "another device is using computer IP address"? Airport used to work fine. I've already tried turning everything on and off several times.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

How do I fix it when Facetime freezes,shakes, then turns to green?

How do I fix it when Facetime freezes,shakes, then turns to green?

The memory that is low is the processor memory, not the overall storage space. Next time, before you go to that site, double tap the home button to see the task bar. You will see the list of apps siting in the recently used list. Most of them are not doing anything, but some of them are using up memory. Touch and hold any one of them until they jiggle, then close them all off by touching the minus sign.
Do that every so often to help the pad use it's memory wisely.
Some apps, and browser pages use a lot of memory, and do not give it back easily, causing what sis happening to you.
You can also get a similar result by rebooting. Press and hold the home and sleep buttons until the apple logo appears, ignore the red slider.

How do i fix it when it said connect to itunes to use push notifications

how do i fix it when it said connect to itunes to use push notifications? pLease help

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

ITunes is telling me that I've already authorized 5 computers and that i have to de-authorize one to play my music! How can i fix this when the only computer I've authorized is my own.

What I think has happened in the past 5years I've been using iTunes, I've cleaned off my hard drive 5times and saving all my music in the process. Each time I start over iTunes asks me to autherize that particular computer, but that computer/OS doesnt exsist anymore. How do I fix this?

Read here since you are a Windows 7 user...
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections

How do I fix blocked plug-in? I tried downloading Flashplayer and restarting but nothing happens.

How do I fix blocked plug-ins? I tried downloading Flashplayer and restarting but nothing happens.

You can't just download it, you must also run the installer. Did you do that step?
~Lyssa

My mac mail won't let me receive emails but will let me send them. How do i fix this ?

my mac mail won't let me receive emails but will let me send them. How do i fix this ?

I am intermittently having the same problem. I can send email, but once the Mail application is opened, it will only pull emails in from the server one time and then I have to "Force Quit" and restart the application to receive incoming mail again. I've tried restarting the computer. I've made sure I have all the system updates. I've checked for conflicts between applications and so far nothing fixes the problem. Once in a while, Mail starts functioning normally on its own, but in a few days it goes back to the same old problem. Has anyone figured out what if going on with this isse?
Joan

I bought a song on my iPod and I put it on my iTunes on my computer now it won't play on my iPod, I'm gonna punch someone I like my song that wouldn't play, how do I fix this?

I bought a song on my iPod and I put it on my iTunes on my school computer (MacBook Air) now it won't play on my iPod, I'm gonna punch someone, I like my song that wouldn't play. If you can help me kik me (becca_wuvs_you) or answer in the comments

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer

How do I fix it when an album won't play on my ipod but will in itunes?

Similar Messages

Maybe you are looking for