How do I fix "kernel[0]: disk3s2: I/O error" message?

For the last couple of weeks, I have seen the spinning wheel show up on virtually any task I try to accomplished, especially when using Safari. At times the delay is just a few seconds and other times a delay for up to 20-30 seconds.
At first I thought it was Safari so I reinstalled the latest update. Went to Time Machine and brought back any programs that I had recently updated for downloaded and still no change.
I went to Activity Monitor and did not see anything unusual. then went to Console where I get the following error message on virtually any task I key in "kernel[0]: disk3s2: I/O error." i have Verified my drives and have repaired disk permissions. Still the problem persists.
What causes this error message and how do I fix the problem?

Any time you think it is safari, and that is one program where manually emptying the temp files and caches doesn't happen on its own automatically, you really need to do it yourself, or rely and hope on the "Reset" feature.
Anytime a program is updated, good idea to clean the temp caches anyway as they may cause trouble.
Check home library /Caches/MetaData and empty the contents, and the icon cache as well. When Safari launches, it copies the bookmarks into a cache folder as well so there are 100s or whatever files there.
Don't rely on Apple First Aid, and not with a maxed out system. Disk Warrior is reliable and finds more. Trouble is unlike TechTool Pro it is one at a time, and mostly one trick only, so it can be slow and can't do much to speed it up.
There are nice FAQs on preventing and troubleshooting kernel panics if you look and want to go that route.

Similar Messages

How do I fix Creative Suite CS2 reinstall with error message "Missing or Invalid Personalization Inf

How do I fix Creative Suite CS2 reinstall on same Windows 7 Pro machine, with error message "Missing or Invalid Personalization Information / Missing Resources Library" when I attempt to reinstall from installation disk set? Was having trouble with Adobe Acrobat Pro 8; Uninstalled and am now stuck. You can email me if you like at [email protected] Thank you.

Hi Bill:
     I don't remember deactivating (after my XP PRO harddrive scattered)
when I did the first Windows 7 pro install of these programs and it went
fairly well except AA8 was a little problematic when converting from MS
Word.
     In my case the AA8 came with a Studio 8 suite of programs as follows:
     1) A Studio 8 installation disk
     2) A Creative Suite CS2 Premium set of installation disks.
     3) A Creative Suite 2.3 Premium upgrade disk with AA8
     I uninstalled AA8 and when I tried reinstallation the directions
said to do the Creative Suite CS2 Premium set of installation disks
first followed by the Creative Suite 2.3 Premium upgrade disk with AA8.
Now I'm stuck; What a mess.
     Thanks for trying to help.
     I will do as you suggest and go to
http://forums.adobe.com/community/creativesuites but FYI:
Bob Lane

TS1717 How do I fix this? I received this error message: " The File "iTunes library .itl"

When I launch iTunes using Windows, I receive this error message: " The File "iTunes library .itl" cannot be read because it was created by a newer version of iTunes" ( I have already uninstalled & reinstalled iTunes)

See also Empty/corrupt iTunes library after upgrade/crash.
tt2

How do i fix or avoid a corrupted file error message

i get an corrupted file error message when i try to send a video from photoshop elements 5.0 to adobe premiere elements 3.0. video plays in photoshop but wont transfer, by photoshop, disc or file. cants get anything into premiere elements. help?
lyndaloon

Lynda,
Are you attempting to send a video file which you have on your hard drive to Premiere Elements3? Or is it a slideshow which you have just made in the PSE slide show create function which you are attemptin to send ?
If it is a video file on your hard drive, then I suggest that you first try to bring the video directly in to Premiere Elements 3. If you have already attempted adding a video file directly to Prem Elem 3, then I recommend that you post your question in the separate forum for Premiere Elements. I suggest that you include info about the file type and codec of the video file as well as what variation of Windows you are running.
Premiere Elements forum at
http://forums.adobe.com/community/premiere_elements
FYI
- I have previously sent photo files from Photoshop Elements 5 to Premiere Elements 3: however I have never attempted to do a Send of a video file. There are many types of video files for which the PSE 5 Organizer has very limited support and that is why I think that you would be better using Premiere Elementa 3 to work with video.
Or perhaps you might have a newer format of video file that Premiere Elements 3 does not support for editing. For example, AVCHD format is not supporedt in PE 3 but is supported in newer versions. This question about types of video is better asked in the Premiere Elements forum.

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

What do I need to do to fix a problem such as an error message stating "iTunes has stopped working"?

What do I need to do to fix a problem such as an error message stating "iTunes has stopped working"?

Hello westerboy,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
Best of luck,
Mario

HT1222 How do I download itunes with a MSVCR80.dll error message?

How do I download itunes with a MSVCR80.dll error message?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

HT4623 How do you fix it if it has a error 2001???

Ive tried restoring the device but everytime it gives me an error saying "error 2001". How do i fix this? i've tried different usb wires but nothings happened and the device has the latest software update. Please help

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

How do I fix the web and wiki server - error reading settings?

Hello,
 I upgraded to OS X Mountain Lion and installed the OS X Server. The Wiki pane has the error message "Error Reading Settings". The Websites pane looks fine, but when I click on "View Server Website", I get the webpage that simply says "Server Error". (I am wondering if these are interrelated, which is why I put them in the same discussion.) I will note that the admin tools must have changed since trying to follow the discussions for previous versions of the Server leads to paths that are not present. Any suggestions on what to try would be most appreciated. Many thanks!

Hello. Unfortunately, serveradmin is indeed one of those paths/tools that are no longer present in the new version of OS X Server. Either that, or it is renamed to something new that I am not aware of. However, doing a ps -A | grep -i postgres, I get the below. I am not sure if this really means postgres is running or not. Looking in system.log file, I am noticing a weird error (attached). Any thoughts on this would be most appreciated. Many thanks!
--------- ps -A | grep -i postgres -------
3709 ?? 0:01.67 /Applications/Server.app/Contents/ServerRoot/usr/bin/postgres_real -D /Library/Server/PostgreSQL/Data -c listen_addresses= -c log_connections=on -c log_directory=/Library/Logs/PostgreSQL -c log_filename=PostgreSQL.log -c log_lock_waits=on -c log_statement=ddl -c log_line_prefix=%t -c logging_collector=on -c unix_socket_directory=/var/pgsql_socket -c unix_socket_group=_postgres -c unix_socket_permissions=0770
3724 ?? 0:00.79 postgres: logger process
3726 ?? 0:02.08 postgres: writer process
3727 ?? 0:01.45 postgres: wal writer process
3728 ?? 0:02.25 postgres: autovacuum launcher process
3729 ?? 0:05.38 postgres: stats collector process
6591 ?? 0:00.01 postgres: caldav caldav [local] idle
20614 ttys000 0:00.00 grep -i postgres
---------- system.log postgres error? --------------
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:81 73290180 +0ms] PID 2655 in /tmp/wikiadmin-is-running.pid is stale, removing
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:86 73290180 +0ms] Failed to remove /tmp/wikiadmin-is-running.pid: Permission deniedJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:99 73290180 +0ms] wikiadmin is already running (pid=2655), check /tmp/wikiadmin-is-running.pidJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:141 9be8000 +162ms] Schema is STILL out of date (0 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:152 9be8000 +0ms] Could not open a connection to Postgres. Please make sure it is running and has the correct access.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [PGCConnection:148 9be8000 +4ms] Error in TXN: Error executing query [INSERT INTO entity_attrs (entity_uid_fk, attrs_bin) VALUES ($1, $2)]: ERROR: bind message supplies 0 parameters, but prepared statement "" requires 2 ( 0 CoreFoundation 0x00007fff8d8ca716 __exceptionPreprocess + 198 1 libobjc.A.dylib 0x00007fff8e824470 objc_exception_throw + 43
 2 PostgreSQLClient 0x00000001099929ae -[PGC
Connection checkResultOK:forSQL:] + 360
 3 PostgreSQLClient 0x00000001099935bd -[PGC
Connection executeUpdate:withParams:] + 879
 4 CSService 0x00000001098e9298 -[CSContentService insertEntityAttributesRow:inTable:withGUID:] + 275
 5 CSService 0x00000001098ea1fc __57-[CSContentService _internalCreateEntity:asUser:withACL:]_block_invoke_0 + 586
 6 PostgreSQLClient 0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
 7 CSService 0x00000001098e9f3f -[CSContentService _internalCreateEntity:asUser:withACL:] + 771
 8 CSService 0x000000010990b3e5 __88-[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:]_block_inv oke_0 + 898
 9 PostgreSQLClient 0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
 10 CSService 0x000000010990b004 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:] + 237
 11 CSService 0x000000010990b5f1 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:] + 126
 12 CSService 0x000000010990ba6b -[CSContentService createEntitiesFromTemplate:] + 124
 13 CSService 0x000000010990cd84 __24-[CSContentService init]_block_invoke_02420 + 225
 14 PostgreSQLClient 0x00000001099925f7 -[PGCConnection transactionInBlock:onError:] + 147
 15 CSService 0x000000010990c4f4 -[CSContentService init] + 789
 16 CSService 0x00000001098bb11b -[CSLocalServiceLocator allocateService:] + 191
 17 CSService 0x00000001098bb1c7 -[CSLocalServiceLocator locateService:] + 108
 18 CSService 0x00000001098c1cf7 -[CSServiceBase locateService:] + 70
 19 CSService 0x00000001098d3f55 __42-[CSSessionService unauthenticatedSession]_block_invoke_0 + 35
 20 CSService 0x00000001098c26d7 -[CSServiceBase disableRefObjsInBlock:] + 279
 21 CSService 0x00000001098d3e13 -[CSSessionService unauthenticatedSession] + 200
 22 CSService 0x00000001098d452f -[CSSessionService currentOrNewSession] + 59
 23 CSService 0x00000001098d58a5 -[CSSessionService enterMagicalAuthRealm] + 51
 24 CoreFoundation 0x00007fff8d8bdcac __invoking___ + 140
 25 CoreFoundation 0x00007fff8d8bdb47 -[NSInvocation invoke] + 263
 26 CSService 0x00000001098bc50f -[CSServiceDispatcher executeRequest:asPartOfBatch:usingServiceImpl:] + 1507
 27 CSService 0x00000001098bc9be -[CSServiceDispatcher executeRequest:] + 114
 28 collabd 0x0000000109851393 +[CSServiceDispatchHTTPRouter routeServiceRequest:response:] + 705
 29 collabd 0x000000010984fe37 __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke_0 + 73
 30 collabd 0x000000010985286c __56-[CSHTTPBackgroundResponse initWithConnection:andBlock:]_block_invoke_0 + 185
 31 libdispatch.dylib 0x00007fff82b49f3d _dispatch_call_block_and_release + 15
 32 libdispatch.dylib 0x00007fff82b460fa _dispatch_client_callout + 8
 33 libdispatch.dylib 0x00007fff82b4723e _dispatch_worker_thread2 + 304
 34 libsystem_c.dylib 0x00007fff8cc0cceb _pthread_wqthread + 404
 35 libsystem_c.dylib 0x00007fff8cbf71b1 start_wqthread + 13

I have itunes set up to sync with my Ipod Touch and my Ipad. As of today, it keeps looking for an iPhone to sync with and give me an error message. I don't have an iPhone and don't know how to stop it from popping open with this error message.

I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How do I change the language of ADF framework error messages?

I'm a beginner in ADF and JDeveloper and I tried to run one of the tutorials for ADF (Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces).
While clicking through the application I got errors like this one:
ADF_FACES-60097:Pentru mai multe informaţii, consultaţi jurnalul de erori al serverului, pt. o intrare care începe cu: ADF_FACES-60096:Excepţie server în cursul PPR, nr. 1
My question is how do I set the JDeveloper/WebLogic to show these messages in English (in order to have better chances while searching this forum :) )?
I'm not talking about messages that I define in my application, but about framework error messages.
I already set USER_LANGUAGE=en in <JDEV_HOME>\.product.properties, but no luck.
Note that WebLogic server messages are in English (e.g. <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HR_EJB_JPA_App is not versioned.>), only ADF messages are presented in Romanian.
Thanks,
Bogdan

I suspect that these messages are considered "system" ones (e.g. not for the user), so they are not generated in the user's locale but in the JVM's default locale. On Windows machines default JVM locale is taken from Windows Regional Settings. If you do not want to change your Regional Settings, you can try Java system properties "user.language" and "user.country". Try to add the following line to WebLogic domain's <tt>setDomainEnv.cmd</tt> script:
set JAVA_OPTIONS=%JAVA_OPTIONS% -Duser.language=en -Duser.country=USA restrart of the server is required.
In Bulgaria we do not have such problems because ADF Faces messages do not have Bulgarian translation, so they are generated in English regardless of the fact that our Regional Settings are set to Bulgarian.
Dimitar
Edited by: Dimitar Dimitrov on May 3, 2011 7:40 PM

How to come out of standard transaction after giving error message

Hi Experts,
I have one requirement like i need to validate a field in standard transaction ME21N. If user enters wrong value then i have to give error message and leave the transaction ME21N immediately. If i do the code with error message then i struck in the same screen of ME21N(but i need to come out of ME21N).Can anybody help me for this particular scenario.
Regards,
Bujji

Ahhh, I see, this is a different story, now.
How about issuing an Information message, and saying LEAVE TO TRANSACTION 'ME21N'.
Message I001(00) with 'THere is some problem, transaction ending'.
leave to transaction 'ME21N'. " Or you may be able to use SY-TCODE here.
Regards,
Rich Heilman

How could I re-open my mail box with error message :The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?

How could I re-open my mail box, as an error message blocked "The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?" Even I entered re-open, the airbook does not response but prompt the same error message again.

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

How do I fix "kernel[0]: disk3s2: I/O error" message?

Similar Messages

Maybe you are looking for