How do I fix MMC could not creat snap in?/iPhone not recognised etc

My 3G Iphone is not recognised by iTunes. It does not appear on iTunes at all. Infact if I doc the iPhone Itunes wil not function at all. I get these messages:
MMC could not creat the snap-in. It might not have been installed correctly. Name Event Viewer: CLSID:FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
and
iTunes could not connect to this iPhone because an unknown error occured (0xE8000065).
and
iTunes could not connect to the iPhone because an invalid response was received from the device.
I hope they are all connected so that one resolution fixes it - I have tried lots of different things from the support pages - appreciate any help anyone can give.

Hi,
This is normally caused by a corrupted system file, I suggest to use system file checker to repair the corrupt file:
1.Swipe in from the right edge of the screen, and then tap Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator.
2.At the command prompt, type the following command, and then press ENTER:
sfc /scannow
As for more details, you can refer to this article:
http://support.microsoft.com/kb/929833
Also, the issue can be found and solved already in this post:
http://social.technet.microsoft.com/Forums/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?forum=w8itprogeneral
Regards
Wade Liu
TechNet Community Support

Similar Messages

How can I fix "catalog could not be opened due to an unexpected error"?

I have many catalogs and this is only happening with one of them.
I've done a Google search on the error message and tried some things that I found from those search results in forums.adobe.com and www.lightroomforums.net.
I've tried deleting preferences file. That did not help.
I was running version 4.2 when this happened. Based on what I found by searching, I thought reinstall might fix the problem so I installed 4.3. That did not fix the problem.
I've tried opening backups but they have the same problem.
I'm running Windows 7, 32-bit. I have 4 GB memory with plenty of free memory available when I try to open this catalog. Hard drives have plenty of free space.
I have tried rebooting my computer. That did not help.
I've been using Lightroom since version 2 and have never had this problem.
lrcat.lock file does not exist for this or any other catalog.
lrcat file is 317,704 KB.
I did recently install Photoshop Elements 11. Up until that time I was using Photoshop Elements 6.
Any suggestions?

I figured out that the error was caused by file permission problems.
I made sure that my user has Full Access to all files related to this catalog and it looks like the catalog is useable again. I don't know how the permissions could have gotten messed up.
This catalog worked as recently as 2 days ago.
It would be nice if error message gave a hint as to what the problem might be.

How do you fix, 'We could not complete your iTunes request. An unknown error occurred (0x800B0109) for windows

I've been trying to solve this for days and havent managed too. I've connected to the modem by cable, enabled on firewall, turned off firewall. But all this seems to have no affect. Can someone help please

I have been trying to Sign In to APPLE Store for days, works fine on Windows XP, But not on Windows 7 64bit...
Any Suggestions please...!!!

MMC could not create the snap-in Event Viewer

when I try to invoke the event viewer in Vista I get the following error:
MMC could not create the snap-in.
Name: Event Viewer
CLSID: FX:{b05566ad-fe9c-7a4cbb7cb510}
I am having this problem. All of the information I find is one or two years old. I have seen several queries about it but never a complete solution posted.
I was wondering if anyone knew how to fix this problem
Thanks

Looks like I found easier way for my Windows 7 Home Premium.
http://social.technet.microsoft.com/Forums/windows/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?prof=required
"I
have removed the [HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MMC \ SnapIns \ FX:{b05566ad-fe9c-4363-BE05-7a4cbb7cb510}
key (after
exporting it).
" thanks to Tom
No need to replace .NET, No need to delete machine.config.

MMC could not create the snap-in {18ea3f92-d6aa-41d9-a205-2023400c8fbb}

I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I appreciate your help.
Kind regards

This error acoured after i try to install the Net framework 3.5, then I got
See below the previous error
=================================================================================================================
Dear All,
I have a HP Proliant with Xeon processor with Windows Server 2008 x64 running it.
I have a problem while i try to install updates, error code 800B0100
I tried with last know good configuration and it didn`t work.
The update which stop the updates is the Microsoft .NET Framework 3.5 SP1.
I tried the Checking System Update Readiness
and I got the following message
Checking System Update Readiness.
Version 6.0.6001.22275
2009-03-11 18:46
Checking Deployment Packages
Checking Package Manifests and catalogs.
Checking package watchlist.
Checking component watchlist.
Checking packages.
(f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB948609_server_0~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
(f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB948609_server~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
(f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Checking component store
Checking SMI Store
Summary:
Milliseconds: 138510
Found 3 errors
CBS MUM Missing Total Count: 3
My problem is that i can not see the Roles and Features.
According to my opinion this problem I caused by my self.
I was trying to install some roles to prepare the server
for the Exchange 2007. One of them asked me to restart the
server (I dont remember which one).
I did not restart it I left for latter on because my colleagues where
still working in some files (file server).
When I opened it after a while I saw the message saying that the
update Microsoft .NET Framework 3.5 SP1 can not be installed.
I tried many thinks and nothing is working.
I appreciate your help
Thank you in advance
Vincent Hu MSFT , Moderator Monday, March 16, 2009 6:13 AM
0 votes Vote As Helpful
Hi,
Please perform the following suggestions to see whether the issue continues:
Solution 1: Copy the corresponding files from another computer
1. Please download that Hot fix KB948609 which was showing as missing in CheckSUR logs.
2. Please rename the hot fix from extension *.MSU to *.cab so that you can extract the contents of that hot fix. Once you extract that hot fix we see another KB*.cab file inside “Windows6.0-KB948609-x64.cab", please extract the contents of this file as well.
3. You needed three files for a particular hot fix based on the Checksur.log. (i.e. Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum)
4. Please rename update.mum and update.cat files from “Windows6.0- KB948609-x64.cab” to the desired file name as shown below.
4.1 Please rename Update.mum to Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum.
4.2 Please rename Update.cat to Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.cat.
5. Please copy these two files to the following location %windir%/servicing/packages and then run CheckSUR tool again and it resolved the issue.
Note: Please process another two files follow the previous steps.
Solution 2: Download and extract these files manually
1.    Copy these 3 packages for KB948609 from other windows 2008 server from c:\windows\servicing\packages directory.
Package_for_ KB948609_server_0~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Package_for_ KB948609_server~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
2.    Now only Trusted Installer has Full Permissions on c:\windows\servicing\packages directory.
3.    So you have to take ownership of this folder by going to Security -> Advance Tab -> Owner and Take Full Permission.
4.    After you have Full Permissions you should be able to copy all the 3 files to this folder.
Marked As Answer Vincent Hu MSFT , Moderator Monday, March 23, 2009 1:32 AM
================================================================================================================
While trying to implement the solution: Solution 1: Copy the corresponding files from another computer
i have got this error now.
Now i can not even open the server manager.
King regards

SAP MMC error - MMC Could not create the snap in

I installed 3 new instances on a new server, and i get the following errors.
MMC Could not create the snap-in
MMC could not create the snap-in, the snap-in might not have been installed correctly.
Name SAP System Manager
CLSID: {633547ee-A302-11D1-Ae59-080009b07dbb}
Any Ideals.

Hi,
I got the exactly the same error. I installed GUI 7.10, and I installed the latest MMC but during installation of MMC was prompted that current version is allready newer.
Do you got some more specific answer on how did you solve this issue?
Thanks!
Best regards,
Jacco Raymakers.

MMC could not create Snap-in Event Viewer after installation of Peachtree 2010

As my Hard Disk Crashed I again INSTALLED WINDOWS 8.1
and observed that after installing Peachtree Accounting 2010 MMC crashed and
when opening MMC console it contains nothing and error windows opens saying
"MMC could not create the Snap-in. The Snap-in might not have been installed correctly.
Name: Event Viewer
CLSID: FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
I had also installed in the past .NET 3.5 for Peachtree 2010
How, to resolve the issue. kindly guide
Thanks

Hi,
To find the root cause, we need analyze this dump file of this process. The whole process is listed in following article:
Easily Resolving an Event Viewer Error using a Process Memory Dump
http://blogs.msdn.com/b/ntdebugging/archive/2009/02/16/easily-resolving-an-event-viewer-error-using-a-process-memory-dump.aspx
You can follow it or upload the related file in forum so that we can help you on it.
Alex Zhao
TechNet Community Support

MMC could not create Snap-in Event Veiwer

I HAVE INSTALLED WINDOWS 8.1
when opening MMC console it contains nothing and error windows opens saying
"MMC could not create the Snap-in. The Snap-in might not have been installed correctly.
Name: Event Viewer
CLSID: FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
I had also installed in the past .NET 3.5 for Peachtree 2010
How, to resolve the issue. kindly guide
Thanks

Hi,
This is normally caused by a corrupted system file, I suggest to use system file checker to repair the corrupt file:
1.Swipe in from the right edge of the screen, and then tap Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator.
2.At the command prompt, type the following command, and then press ENTER:
sfc /scannow
As for more details, you can refer to this article:
http://support.microsoft.com/kb/929833
Also, the issue can be found and solved already in this post:
http://social.technet.microsoft.com/Forums/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?forum=w8itprogeneral
Regards
Wade Liu
TechNet Community Support

How to fix file could not be found

How to fix file could not be found

The instructions are in the videos on the page. Scroll down to the videos and click the big arrow in the middle of the image. It might not be obvious that those are videos.

MMC could not create the snap-in

Hello All
I hope this is the right section for this post.
I'm running SAP BW 3.1. Recently the server had a package of hotfixes installed (mainly security ones) and since then I cannot run the service in MMC. The "SAP R/3 Systems" section is there but nothing is underneath. The right panel indicates "MMC could not create the snap-in. The snap-in might not have been installed correctly".
Adding the snap-in manually returns the same message.
No "disp+work" process runs.
What should I check?
Thanks in advance for help

Hi There,
Please refer to following SAP notes.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=142100]
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=544533]
Hope this helps.
Manoj

"MMC could not create the snap in.The Snap in might not have been instaled

Hi ,
   After completed installation of NWDS SP 14 version and after system
restart,our local server is not working its showing an error.
   "MMC could not create the snap in.The Snap in might not have been
installed correctly."
SAP Logon is also now working in my system. NWDS is not properly installed i
think.
Actually on that day gui also i have installed on our local server.
but when i login through <sidadm> server showing tree & also i am able to start server.
but i am not able to uninstall & install any gui or nwds...
what to do.....

Hi,
   MMC is not specific to GUI or MWDS. It is a management tool to start/stop server. It has nothing to do with GUI or NWDS.
1) Login with admin account (windows admin account, say sidadm) and check if MMC loads the tree with nodes for server instances. If so, use that and start server.
2) If required, check with authorizations for the windows account
3) If nothing works, then check these threads.
sap mmc problem
Re: MMC not working. Portal down
Regards,
Harini S

MMC could not create the snap-in Server 2008 Enterprise

I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I have not been able to find a server that has the same files as listed in other references but none of those other servers have the
same issue:
"On
another Windows Server 2008 x64 or Windows Vista x64 computer, in
thec:\windows\servicing\packages folder, 6 KB948609
related files may exist. Please copy all of them from that computer to c:\windows\servicing\packages on
the problematic computer."
So any assistance would be great.
"If at first you don't succeed, get a bigger hammer."

I take that back... I can cut and paste:
Here is the error from the MMC:
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
   at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at System.Activator.CreateInstance(String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, Evidence securityInfo, StackCrawlMark&
stackMark)
   at System.Activator.CreateInstance(String assemblyName, String typeName)
   at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
   at Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
   at Microsoft.ManagementConsole.Executive.StandAloneComponentData..ctor(SnapInRegistrationInfo info, Int32 bookkeepingId)
   at Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"If at first you don't succeed, get a bigger hammer."

LocalSecurityPolicy Showing MMC Could not create the snap-in

Hi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
Smilee

Hi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
Smilee

MMC could not create snap-in

I'm running Windows 8 Pro x64 (patched through Nov updates released on 11-13-2012), and am unable to view some of my mmc snap-ins, specifically the event viewer (eventvwr.msc)
Error Msg: "MMC could not create the snap-in. The snap in might not have been installed correctly.
CLSID: FX{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
Things I've tried
uninstalled and re-installed .net framework v3.5 (via programs and features)
unable to access event viewer from a remote computer (e.g. windows server 2003 with domain admin credentials).
installed/uninstalled the windows 2012 deployment toolkit - didn't help my situation so I uninstalled it.
disabled UAC - didn't help either.
I'm at a loss here. If someone can provide some assistance, it would be appreciated.
Regards,
Marty

Hi,
According to your description, I suggest to perform these steps to troubleshoot the issue:
1 Run sfc /scannow
http://support.microsoft.com/kb/929833
2 Run regsvr32 C:\Windows\System32\msxml3.dll
3 Create another administrator account and login to see if the same issue occurs
If the issue persists, you can try to use system refresh for test:
Enter the Start screen
Click Control Panel
Click General on the left column
Under the Refresh your PC without affecting your files, click
Get started
Leo Huang
TechNet Community Support

SAPMMC - MMC could not create the snap-in

Hi,
I have NetWeaver Developer Studio 2004s installed with Windows Server 2003.
The server was working correctly. But I tried to install SAPGUI from the SapNetWeaverABAP7TrialVersion package. The installation finished with errors.
I could´t even open sap logon. So I uninstalled SAPGUI. But it disconfigured my server and SAPMMC wasn´t working.
When I open SAPMMC, it return the message "mmc could no create the snap-in", and no Item appears in the left pane.
Is there any way to restore SAPMMC configurations? Or I Need to reinstal Sap NetWeaver Java 2004s?

Hi,
Try to run the exe C:\usr\sap\A31\SYS\exe\run\sapstartsrv.exe and register.
else
From the MMC->File -> Add remove Snap in
Regards
Ayyapparaj

How do I fix MMC could not creat snap in?/iPhone not recognised etc

Similar Messages

Maybe you are looking for