How do I fix my computer charger if its not working?

I've been trying to find a way to get my charger to work but I still don't see any light. Nothing is showing to indicate that something is broken. It just doesn't want to work for me right now. I need help, if someone has already fixed this problem a solution would be much appreciated. Thanks

kaycface,
do you know whether it’s the charger that’s not working, or your MacBook Pro that isn’t charging?
Do you have access to another MacBook Pro? If so, you could try your charger with that other MacBook Pro, to see if it charges that. If it does charge the other MacBook Pro, then the problem lies with your MacBook Pro; if it doesn’t charge the other one, then the problem lies with your charger.

Similar Messages

How can i fix my homebutton if it is not working in iPhone 5s

my iphone 5s is working well except the homebutton. i can open it with my fingerprint but i cant open the homepage when i press it. How an i fix my homebutton if it is not working in iphone 5s?

Stolen
http://support.apple.com/kb/HT5668
Erase iPad
http://support.apple.com/kb/ph2701
Lost Mode
http://support.apple.com/kb/PH2700
Reporting lost or stolen iPad
http://support.apple.com/kb/HT2526

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

What is not working exactly?
Did it install correctly? Accept the serial number OK? Activate OK?

How to preview ENTIRE video (basic question but its not working)

Hi
Ive been fiddling with this for over 2 hours and I cannot for the life of me figure out how to preview the entire video. All I can get are the clips. When I click the source tab it only allows me to select individual clips not the whole track. How on earth do I preview the entire video?
Thank you!
And for bonus marks, is there a way to slim down the sides of the video (there are black bars in the native file) and re-render it? E.g. Change a video from 720x480 to 720x380 but not by shrinking the whole file, but rather trimming the sides (Sony Vegas can do this so Im wondering if Premiere can too)

You are most welcome, and glad that it helped.
Craig has addressed how to get another color. [It pays that he's in NZ, and is about 2 days ahead of me in the US... ]
Depending on the effect that you want, you might also consider doing an "abstract" background, rather than a single, flat Color Matte. The choice will depend on what you want to do, and probably also on your material. When faced with vertical images in a "SlideShow," I use this often, and will often use it for all images in a SlideShow. This ARTICLE goes into more detail, just in case you might want to do something similar.
Good luck,
Hunt

How do you activate the everything package? its not working!

I just topped up £15 and when i tried to activate the £15 everything package it says i have incefficient funds, and as customer service is closed, please help.

Have you tried text EP15 to 150?

How do I fix my computer from freezing....

How do I fix my computer from freezing every time I try to play a youtube video? The video will try and play the audio track but the screen stays black then the entire computer freezes! I just got this computer less than a month ago and i believe it is up to date on all the updates so I feel like this shouldnt be happening. HELP!

Thank you, i'll try giving them a call. It has now changed to not only youtube videos wont play, but also when i put in a DVD it wont play either. I seriously have no idea what is going on.

My computer has a white screen at start up and sits for hours. How can I fix my computer?

My computer has a white screen at start up and sits for hours. How can I fix my computer?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I cannot open a website that I could open yesterday. I used a different computer to access the same website, and it worked. How do I fix my computer?

I cannot open a website that I could open yesterday. I used a different computer to access the same website, and it worked. How do I fix my computer?

What happens when you try to access the site? Can you access it from a different computer on the same network? Your profile says you have a Mac Pro, but you posted in the MacBook Pro area. If you have a MacBook Pro, can you access the site from another network, such as a public hotspot?

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also.

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I came home and i came home and my iphone is now frozzen on the applmy iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can text and call and stuff

i came home and my iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can text and call and stuff

I got to that page but clicking on the Subscribe Free had no effect.
Nothing showed in the Podcasts nor the iTunes U.
In fact I also subscribed to Stanford's lectures and despite actually managing to DL them there is still no subscription in iTunes U, just the Intro to Computer Science belatedly.
Peter
I'd like to attach the screen grab of the out of order and randomly DLed selection of Harvard's course, but the forum won't let me attach it even though it is only 456k. Correction, close post and retry and now it lets me. NB how intermittent the DLs are and in no particular order.

How do I activate Acrobat XPro- I've installed CS6 Premium on my new computer and Acrobat does not work and says its not activated. How do I resolve this problem?????

How do I activate Acrobat XPro- I've installed CS6 Premium on my computer and Acrobat does not work and says its not activated. It is listed on the programs on the computer but will not respond. How do I fix this?????? Help Adobe?????

Hi t0m#2410,
How did you install Acrobat, did you install it as a part of Suite installation.
If it is a part of suite then deactivate suite uninstall Acrobat, Reinstall Acrobat using Suite media. Launch Photoshop first and Activate.
Then try launch Acrobat.
Regards,
Ajlan Huda.

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

Hello @GiveHP2ndChance,
I understand that you are not able to get adequate sound from your notebook computer's BEATS Audio, and I would be happy to assist you in this matter!
To correct the sound on your system, I recommend following this document on No Sound from Speakers (Windows 7) or for (Windows 8). This should help improve the quality of the audio on your notebook.
To assist you further, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If the same lack of quality is present when headphones are plugged in.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!

http://support.apple.com/kb/TS2690

Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?

Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.

How do i fix "Merge to HDR.jsx could not be found" cs6?

how do i fix "Merge to HDR.jsx could not be found" cs6?

Nobody can tell without some system info. Start by running the Creative Suite Cleaner Tool and reinstalling PS.
Mylenium

How do I fix my computer charger if its not working?

Similar Messages

Maybe you are looking for