How do I fix my HP PSC 410 LCD screen which is full bright???

How do I fix my full bright HP PSC 410 Screen

Hey @bgeary35, 
Welcome to the HP Support Forum. I hope you enjoy your experience here.  
I understand that you're looking to adjust the brightness on your HP Photosmart Premium Fax e-All-in-One Printer - C410a.  I would like to assist you with this.
From interfacing directly with the printer, its menu and HP's internal Front Panel Guide documentation, I can confidently assert that there is no setting available to directly adjust the brightness of your printer's display.  
Having said that, I do have one recommendation that may help.  Complete the following steps to restore your printer's factory defaults*:
*Note  that this will reset all custom printer settings including wireless network configurations. 
From the printer's front panel, touch setup/wrench icon
Touch Tools
Touch Restore Factory Defaults
If you're finding the brightness on your display hasn't changed and it's impeding the functionality of your printer, I recommend you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps.  Thank you for posting in the HP Support Forum and have a great weekend!  
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • How do I fix my ipod with a blank screen?

    How do I fix my ipod with a blank screen?

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • How can I control an iPad from a touch screen which is mirroring the iPad screen

    How can I control an iPad from a touch screen which is mirroring the iPad screen.
    This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
    There must be a way.?????????? Help!!
    Peter Niass
    [email protected]

    Have a look here
    http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

  • How do i fix my white i pod touch screen

    how do i fix my i pod touch 4th generation when it has a white screen and wont let me do anything

    See  Display Shows White Screen Here
    http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • How do i fix my iod touch... screen stays black

    how do i fix my iod touch..... the screen stays black with the apple logo then cuts off again after like 5 minutes..... someone please help me ?

    Please tell me it's not jailbroken.  If it is, all bets are off.  It is not...
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • How can I fix my iPod 5 th gen screen it's cracked to the max and it's also broken where can I go to fix. It and how much would it cost to maybe switch it in or get a new screen replaced

    How much will it cost to get a cracked screen to get replaced or just to switch in a ipad 5th gen broken  iPod

    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
    Apple - iPod Repair price                       
    The following will void the remainder of your warranty
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • How can I fix my mac mini g4 1.5ghz which gets the must reboot message?  what is the reason?

    How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly?  what is the reason?  Hard disk has no errors.

    Based on your description, you are having a kernel panic.
    Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
    Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
    http://www.macfixit.com/article.php?story=20060309075929717
    Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
    To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
    Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
    May be a solution on one of these links.
    http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
    http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
    http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
    http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
    http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
    http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
     Cheers, Tom

  • How to i fix a flicker on my iMac screen?

    My imac screen has just started flickering. I have researched it and it already a promblem with other mac's. How is this problem fixed? Thanks

    You could reset the pram and smc to see if that helps. I would however suggest if the machine is within waranty you contact your local Apple store as this sounds like  a hardware fault to be honest.

  • How can I fix Version 24.5.0 (installed today), which cannont communicate with any external URLs or mail servers?

    I am using Windows XP, v 5.1 w/ Service Pac 3 installed.
    Was running earlier version until automatic update at @1730 hours (EDT), April 30, 2014. After auto update to 24.5.0, the "What's New" tab has the note "The connection was refused when attempting to contact live.mozillamessaging.com." and when I try to access e-mail servers, I get a pop-up note "could not connect to mail server [e-mail address], connection was refused" on one account and it hangs trying to connect to "pop.secureserver.net" or the mail server for two other accounts.
    I have restarted with Add-Ons disabled and all the problems continue to exist.
    I can read the e-mails via my browser on the appropriate server, so I know it is not a server issue.
    Server settings for e-mail are correct according to e-mail service providers.
    How does this get fixed?

    Make sure Thunderbird isn't blocked by a personal firewall.

  • How do I fix my ipod touch when the screen turns green , buttons are unresponsive and can't connect to a computer

    My ipod display screen only shows a green light and the buttons are unresponsive. When i connected it to the computer , Itunes would not recognise it. Please can you help or seggest things that may help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • How do I fix a cracked iPod 4th generation screen without having to go to an apple store and pay $100??, How do I fix a cracked iPod 4th generation screen without having to go to an apple store and pay $100??

    Ok, so on sunday, i lost my grip on my iPod touch (4th gen) abd it fell on the lock button. I tugged on my headphones so it wouldnt hit the ground, and all that touched the ground was the top of the iod where the loc button is. Now I have a crack from the middle of a previous crack (very small) and it goes across the screen . Its under the front camera down and across. IDK if my mom bought a warrenty when she bought it, and she doesnt know about the crack yet. Is there any way to fix the screen without having to go to apple and pay $100 to fix it. I dont have that money right now, money is tight. Please help!!!

    You could try to replace it yourself.  Take a look at this instructional video (or a similar one) http://www.youtube.com/watch?v=dgcmZa5dCNo  If you think you can do this and want to try, you can Google for "Ipod Touch screens" to find a source you like and purchase one.  Just note that if you try to fix it and fail, Apple will no longer exchange it for $99. 

  • How to fix "Dead Pixel(s)" on LCD screen

    I currently bought a Brand new tv off ebay, and when I got it in the mail, I was excited, but when I turned it on 22" LED Back light LCD 1080p full HDTV, and it has 2 dead pixels. I didn't think much of it, but its passed the point of when I can return it to the owner from which I bought it from. My question is, is there retailers such as Best Buy, Walmart or any other store that can fix Dead Pixels (the pixels aren't stuck, they are dead) I've tried multiple ways to fix it, such as they suggest, but Im willing to spend a few extra bucks to have the 2 pixels replaced/fixed. I've done the tapping the dead pixel to even see if it would register and it doesn't and the damp clothe way, including the heating it up with poor ventilation, for a day or so. I have seen success it in, but not completely. Help would be very much appreciated. thanks.
    -David Willoughby-

    There is a difference betwen a "stuck" pixel and a "Dead" pixel.  a stuck pixel is one that is not cycling; it is either not discharging (stuck on) or not charging (stuck off).  Such pixels can spontaneously correct themselves, and are prone to recurring.
    Dead pixels are pixels that are not operating at all.  They are OFF, meaning dark.  If the pixel is on, and displaying any color, then it is stuck and not dead.  Dead pixels are generally not repairable,  and are permanent. 
    Forget the "tricks" that you have heard.  Any success you have uysing them is merely coincidental.  In many cases, cycling the unit will revive stuck pixels, as sill allowing the unit to either reach full operating temperature or cooling to the coldest ambient temperature possible.
    Good luck...I hope your pixels are stuck and not dead.
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • How can I fix a Window that disappears Off Screen

    Hi,
    I'm running a new installation of MAX/msp and the output window does not appear on my monitor. When I use exspose the window comes in to view but when I click on it it disappears off screen to the left, therefore I can't grab it with my mouse.
    I think the problem stems from when I was using dual monitors, one of which burned out so I am now only using one.
    So far I've deleted all the MAX/msp preferences that I can find.
    I've looked in System Preferences - Displays - This shows that my mac only expects to see my single monitor.
    I remember in OS9 there was a key command to allow you to move windows without the use of a mouse - If there's one for OSx it would probably solve my problem but I can't find it.
    I'm using a G4 dual 867 OSX 10.4.7 with a SyncMaster920n monitor
    Any help appreciated
    James
    G4 dual   Mac OS X (10.4.7)  

    ok problem solved from within MAX
    Menu: window -> alt + click window of your choice
    James

  • How can i fix my iphone 4s ? the screen went black and wont turn back on.

    ugh

    Hi sandy,
    Have you tried a reset? Hold down the Home and Power buttons at the same time for up to 20 seconds. Hopefully the Silver Apple will display, which will mean the phone is resetting (no data will be lost). As soon as the Silver Apple appears, release the buttons, and wait until the Home screen comes back on.
    You should be OK after that.
    Good luck!
    Cheers,
    GB

  • How do i fix a scratch on iPad mini screen?

    IS there any product I can buy to repair a small scratch on my iPad mini screen?

    You can either put a screen protector over it and ignore it, pay the $219+ for an out of warranty replacement or if you have apple care plus, cash in one of your $49 dollar accidental damage events and get a replacement.

Maybe you are looking for

  • Backing up vs. syncing

    I needed to exchange my ipad so through the iCloud menu I backed it up to my computer.  Took forever, I fell asleep,later I woke up to a blank screen.  I Checked and confirmed it backed up.  Then I exchanged it. The "apple girl" told me to first upda

  • How to create 2 char infoobjects for single table

    Hi Friends,                 Please help me  how to create two chacteristics infoobjects for a single table.... Thanx in advance

  • Mercedes car ipod connector will not navigate itunes

    Hi, My ipod and iphone no longer work properly with any Mercedes ipod connector. I cannot navigate itunes on the phone or ipad - the screen says "Connected to an ipod accessory" I can navigate audible or other apps but not itunes. This is a new probl

  • I am unable to connect wifi via iph4s (greyed out)

    hi ! I am unable to connect wifi via iph4s.. my iph4s wifi tab is greyout. wifi disabled, please tell the solutions as soon as possible ... thanks

  • Assignment of Activity Types to Cost Centre

    hi,   i am  creating a work centre and for costing purposes i need to give the activity type and the cost centre.   even though i have defined an activity type and in it used an allocation cost element which in term is assigned to a cost centre,in th