How do I fix my Iphone 5C that has stopped charging?

My Iphone 5C has stopped charging. I got a new power chord and that did not help. I want it to work so I don't lose all of my pictures. suggestions?

And with the new power cord it is not charging on the computer or the wall charger?
Get  a flashlight and a magnifying glass and check the Lightning port on the iPhone. Clean any dirt/debris/lint, etc. that you find.

Similar Messages

  • How can i fix my iphone 4 that doesnt want to restore

    how can i fix my iphone 4 that doesnt want to restore?

    I think you'd need to supply a little more information than that if you want help...
    At what stage does the restore fail?
    Are you trying to update the iOS?
    Are you getting an error code? Have you looked it up using the handy link?
    Have you tried rebooting your computer?
    Have you tried a different cable?
    Have you tried a different USB Port?

  • I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    That pretty much eliminates all the user-serviceable parts the phone has.
    When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.

  • How do i fix a portrait photograph that has harsh sunlight and shadows in PSE12? [was: Help please =) ]

    How do i fix a portrait photograph that has harsh sunlight and shadows in PSE12?

    Try this:
    Duplicate the background layer, and convert this layer to black/white (ALT+CTRL+B)
    Select the young lady's face, and place this on a separate layer (CTRL+J)
    Open a Brightness/contrast layer at the top and group the top 2 layers (CTRL+G). Work the brightness and contrast sliders so that the 2 gray scale layers match as much as possible
    Keep the face layer, but delete the duplicated grayscale layer below
    Change the blending mode of the face layer to luminosity
    With the eyedropper tool, sample color from the original skin
    Open a blank layer at the top, and change blending mode to color
    Paint over the face to match colors. Touch up additional spots as needed, e.g.hand
    Add a levels adjustment layer and work the sliders below the histogram to best advantage
    Sharpen slightly

  • How do I fix:  "Adobe acrobat 9.5 has stopped working"

    Whenever I try to open a file using Adobe Acrobat 9.5, I get the message:  "Adobe acrobat 9.5 has stopped working"  "A problem caused the program to stop working correctly.  Please close the program".  Acrobat reader 9.5 appears to work fine.  I am also having problems when opening PDF files from the internet using Internet Explorer.  If I try to open a PDF file with Internet Explorer I get and error message Box which says:  "Microsoft Visual C++ Runtime Library - Runtimr Error! - Program: C:\Program Files\Internet Explorer\iexplore.exe - R6034 - An application has made an attempt to load the C runtime library incorrectly. - Please contact the application's support team for more information."  Then when I click OK, I get the following in IE:  "Interner Explorer has closed this web page to help protect your computer - A malfaunction or malicious add-on has cause Internet Explorer to close this webpage. - More Information - Windows Data Execution Prevention detected an add-on trying to use system memory incorrectly. This can be caused by a malfunction or a malicious add-on.  Other things you can do:  Go online to learn about the Data Execution Prevention (DEP) security feature".  I am running Windows 7 Pro version 6.1 (Build 7601, Service pack 1) and Internet Explorer 8 version8.0.7601.17514 and Adobe Acrobat 9.5 Standard.  I would give you the version but I can't keep the program open long enough to check that.  Please HELP I need Acrobat working on this computer.

    Reader is not Acrobat, but I got the gist. To try to resolve the issue, open Acrobat and go to Help>Repair. Hopefully that will fix the problem.
    The C++ library sometimes gets messed up and has to be reloaded. That would have to be done by way of MS.
    After the repair, I would strongly recommend going back to Help>Check for Updates and install updates in order. Since you did not mention updates, I suspect you are running 9.0.0. Also, you did not mention your OS level as 32 or 64-bit. If it is a 64-bit system, you need to run the updates for AA9 to work properly.

  • How can I continue with a download that has stopped itself?

    I was downloading a *.rar and suddenly it stopped. I tried downloading the file again and replaced the file *.part with the more advanced content from the previous download but it just didn't work. There apppeared a message "It can't continue because couldn't find the source of the file on the disc."
    What can I do to avoid starting from the beginning?
    If there's a solution, Does it work with download managers too?
    Thanks for helping me out.

    See [[/questions/761494]]
    * Move the old .part partial download and the final file without the .part that has size 0 to another location.
    * Start a new download and pause it, don't close Firefox.
    * Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created.
    * Resume the download in Firefox.

  • How do I fix my iPhone 4 that's keeps turning off and on

    My phone keeps turning off and on. It will show the boot logo and it will dim like its going to the lock screen, but then it will show the loading wheel when turning off. Then the process repeats. I trued restoring but in recovery mode its gets error 21 at the step of getting iPhone ready to restore. Then I tried to do it in DFU mode and it gets stuck in waiting for IPhone. I have tried changing cables that hasn't really worked and I tried updating everything. Please help!!!!!!

    Sounds like you have a hardware problem. Take it to an Apple Store for evaluation.

  • How would i fix my iPhone 4 that is stuck in recovery mode and wont properly restore with error code 21?

    I've already updated my iTunes to the latest version available for PC. The phone is stuck in recovery mode and if I disconnect it from the computer it goes black and then cycles in the reboot screen.  All im trying to do is restore to factory settings.

    Hi Richard_NMLB,
    I'm sorry to hear you are having issues with your iPhone. If your iPhone is currently stuck in Recovery Mode, and/or you are unable to restore it from iTunes, you may find the information and troubleshooting steps outlined in the following articles helpful (bit unclear what exactly is happening when you try to restore):
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Resolve iOS update and restore errors in iTunes - Apple Support
    Regards,
    - Brenden

  • How to fix an iPhone 4 that has gotten "sluggish"

    1) Make sure it's on and unlocked.
    2) Press the Home Key (the "real" button at the bottom of the display twice. That will cause a "ribbon" of application icons to appear at the bottom of your screen.
    3) Press any of the icons at the bottom of the screen for a couple seconds until they start to shake and a little '-' shows up in the upper left corner
    4) Start tapping the '-' marks. (It's real important that you make sure this is done to the icons that popped up in step 2.) Each time you do the icon will disappear. You are NOT deleting anything from you phone, just removing it from memory
    5) Shutdown your phone. You do that by holding both the Home Button (see above) and the Sleep Button (the only other "real" button, located on the top edge of the case until the red arrow pops up. Slide that arrow to the right.
    6) Turn your phone back on by pressing the Sleep Button

    A clarification of your clarification: If you do what the OP suggested with both buttons the Off slider will appear first and you can let go and slide it over. But the hard reset will do more for the sluggishness.
    But the entire suggestion is unnecessary, unless one of the apps in the recently used tool bar happens to be one of the few that actually runs in the background, like Pandora, and you don't want to go to the app itself to stop it, all of this is pointless. The apps aren't running, they've just been recently used.

  • HT4061 how do I fix my IPhone 4s that is disabled

    I forgot my passcode & now my phone is disabled

    Follow instructions in this support document http://support.apple.com/kb/ht1212

  • HT201210 How can i reset an iphone 4 that has been locked with icloud account?

    Help please i have been locked out of an Iphone 4 and it restarted from the factory reset status the icloud info is not mine i tried restarting it by using itunes and it doesnt work please help

    MattWash1 wrote:
    ...  from the factory reset status the icloud info is not mine ...
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • HT4623 How do I fix my iPhone 5 when it stops downloading updates and music, when there is plenty of storage space?

    I just got my iPhone 5 a month ago and the last time I clicked on updates for a few of my apps, my phone has completely stopped downloading. The apps are stuck at waiting to update, which means they are unavailable for me to use. Plus, my newly downloaded music is stuck being unable to sync, so I manually added it to my phone through my macbook. I have tried restarting my phone, since I hadn't powered off in a while, but that had no effect. Any ideas/solutions?

    I use an Apple AirPort Base Station to provide WiFi at home, the AirPort provides me with 2.4GHz and 5GHz WiFi frequency.  For my iPhone WiFi setting I select the 5GHz Channel simply because it is faster than the 2.4GHz.
    The downside to using the 5GHz is that it does not penetrate solid as well as the 2.4GHz frequency, so if you can select a 2.4GHz frequency that may well help.

  • How can I recover an iPhone 4 that has been submerged in water?

    My iPhone 4 went swimming. Would live to be able to find a way to restore an use again. Anyone have any luck with home remedies, or know if the apple store can repair cheaper than a new phone would cost?

    Turn it off. Don't plug it to any power/charger. Let it dry - some recommend putting it in a bag filled with rice to absorb moisture, I prefer just putting it in an airy area. It is not likely to save it (electronics just don't like watsr). It will take a while to dry, so don't be tempted to try it out too soon.
    Apple does not "repair" iPhones, but you can get it replaced. Check Apple website for the model you have.
    Good luck.

  • How can I fix the paste function that just stopped working

    Paste function just stopped working.  Tried restarting, but still doesn't work.

    I had this problem as well. It also manifested itself as drag-n-drop not working in Mail. I checked the Console and saw a line about "CoreDragCreate error: -4960".
    A Google search for that revealed some details about the "Pasteboard" server that handles this stuff possibly not running.
    I restarted my machine and it worked correctly. You might verify in the Activity Monitor that you have "pbs" running.

  • HT201406 how do i fix my iphone that does not do anything

    how do i fix my iphone that does not do anythig

    With the very limited information you have given, I would try a reset - hold the power button and the home button until you see the apple logo then release. Or, restore as a new device in iTunes. What does and does not your phone do?

Maybe you are looking for

  • Need help: BufferedImage and zooming

    please help me understand what i am doing wrong. i am having a hard time understanding the concept behind BufferedImage and zooming. the applet code loads an image as its background. after loading, you can draw line segments on it. but when i try to

  • Save As bug in File Manager

    OS Version 2.1.0.1032  Build ID 328132 I'm using the PlayBook as a handy substitute for a netbook for mobile form filling: I work around hospitals testing medical devices. I load up a set of basic MS Word 2003 forms listing the test steps for each ma

  • HT201365 I upgraded to ios 7, how do I open my phone when that code doesn't work?

    Just up-graded to iOS 7, entered a passcode. Now the phone will not unlock with that code. What do I do?

  • Oracle BUG (CASE + remote tables + inline view)

    Oracle 9.2.0.8 BUG: Oracle inserts NULL when we use CASE statement in the SELECT query and we join a remote table with inline view. Script: CREATE TABLE t1 (a number(19,4)OK. SELECT (case when b = 1 then c else d end) FROM t2@Remote LEFT JOIN (SELECT

  • Quicktime 10 (or HDD) slow after TM restore, HDD fragmentation?

    Hi there, have a rather weird problem with Quicktime 10. I am producing timelapse videos on a QuadCore iMac and it always has been fast and smooth (and some files - prior to further postprocessing - can be rather big > 2-4 GB). recently I had to rest