How do I fix my windows installer package?
I can not install the latest iTunes 10.5. I keep getting an error message that says "There is a problem with the Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." Please help if you know how to fix this issue.
Are you still having trouble? Try this:
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!
Similar Messages
-
Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?
At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
"there is a problem with the Windows Installer Package" Does anyone know how I fix this??
My itunes ends up being so out of date becuase I can never upgrade it.
I have a sports kit and want to make sure I am using the most uptodate version
I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
Please helpGo to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit*** -
When I try to download iTunes 10.5, I keep getting the message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." Therefore I can't update my iTunes to the new version. How can I solve this? I don't want to pay for technical support as this seems to be a problem with the iTunes package Apple is providing itself by that message.
Hello, hartadrian.
I would recommend attempting to repair the Apple Software Update via the steps below. Once processed attempt to download, update or install iTunes 11.
How to repair Software Update for Windows
http://support.apple.com/kb/TA24326
If you are still experiencing the issue, completely remove all components of iTunes in the order specified of the article below. Once this has been processed, attempt to download and install iTunes 11.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you experiencing errors when removing components of iTunes, follow the steps in the article below.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
ERROR: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." I have tried everything which I found on google and apple community. Does anybody have the exact solution? PLEASE HELP!
What has this to do with the application Front Row which this forum covers?
What are you trying to install, on what Mac, with what version of OS X? -
Hi,
This is how it all started. When the new update for iTunes 11 came out, I tried to update it. After I had updated it I found nothing had changed. So i tried rebooting my computer and everything and found that still nothing had changed. So I tried uninstalling it. After that I tried to re-install it, but it came up with the
"There is a problem with this Windows Installer package ..." message. So I looked around the internet and found a website that told me to uninstall all Apple products. So i did that. When i tried to uninstall Apple Software Update, it came up with the 'problem with windows' message again. So I used Revo to uninstall it. So I rebooted and tried to install it again. It installed Bonjour and all of the other programs but stopped halfway and gave me the 'proplem with windows' message again. I've looked around and most of the solutions have been to try and repair Apple Software Update, but the problem is, I've already deleted it. So can someone PLEASSEEEE help me fix this problem! (Sorry for droning on)http://support.microsoft.com/mats/Program_Install_and_Uninstall try this an see if it fixes it.
-
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
When trying to install an itune upgrade on a Windows 7 machine I get the following message: There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. One solution I found by googling is to go to Control panel/add/remove programs and REPAIRING THE APPLE SOFTWARE UPDATE. Don't seem to work for me tho......any solutions? Thanks
I finally found a reply that said to go to the Apple Installer and repair and it seems to have worked! I was looking for a Windows installer all the time. Thanks to whoever put that fix out there.
-
hello i have been trying to install i tunes 10 on to my pc but as i get to the end of installation it comes up with the message windows installer package failed contact support or vendor how do i solve this im running vista of an acer laptop many thanks
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I get this message: "A program required for this install to complete could not be run.
There is a problem with this Windows Installer Package". OS, Windows 7-64Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC, and try another iTunes install. Does it go through properly this time? -
I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?
Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
How can I open excel pdf files
How can I open excel pdf files
-
How do I connect my library and playlists to iTunes 10 on PC.
My computer crashed. Luckily I had my extensive library and playlists on external drive. I have a newer PC now with Windows 7. I have tried to download a version of iTunes 10 but I am uncertain of how to connect them. I have made a link with my Libra
-
Questions to ask Client on BPC
Hi My client is already implemented BPC. I dont have any idea abt thier BPC. I have to be in a discussion to ask Questions on BPC from technical front. Could any one tell me what are the questions do i need to ask from technical front to client on t
-
Diff between END_OF_LIST & END_OF_PAGE in ALV's
Hi can anyone plz tell me the exact difference between the END_OF_LIST & END_OF_PAGE in ALV's? I had actually coded to call up a subroutine containing the REUSE_ALV_COMMENTARY_WRITE when the END_OF_PAGE event arises. In this subroutine am just displa
-
Hello Experts! I have a customer that wants me to send ANSI X12 832 - Price Sales Catalog. I am assuming that I need to use idoc type PRICAT. Has anyone ever done this? Can someone please point me in the right direction to get started. Thank you so