How do I fix problem with PS Elements 12 install?

I recently purchased a bundle of PS Elements and Premier Elements 12.  The install hung from the DVD so I copied all the files to HD and installed from there.  Things went well untill one day, PS told me that my trial had ended (I entered my serial numbers during the install).  There didn't appear to be a way to re-enter, so I removed PS and re-installed (again from the HD and again entering my Serial Number).  Now upon launching PS Editor, I receive a notice that it's verifying my serial number.  It comes back without an error but doesn't run the editor.  Now what?
Pete

I got it working.  I did some research and found a post by H. Adams.  I found the SLCache folder for Adobe and deleted all of the files in it.  It can be found on the C drive under 1) Program Files(x86); 2) Common Files; 3) Adobe.  There are several files and one directory in the SLCache folder.  Delete them but NOT SLCache.  The Menu program then kicked off a registration process for PSE 12.
Thanks for your help!
Pete

Similar Messages

  • How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

    We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
    A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
    If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
    We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
    So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
    Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
    It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
    I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
    It is inconsistent.
    Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
    If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
    If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
    So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
    Or do we need to play this game of crop and trim the image so that it doesn't drop out?
    Any thoughts, advice, direction would be gratefully received!

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • How do I fix problem with Smart Sharpen & CR as filter

    Smart Sharpen doesn't apply (or apply completely).   Photoshop CC on Mac OSX 10.7.5
    new merged layer > Filter > Sharpen > Smart Sharpen > adjust sliders > toggle Preview > click OK (progress bar) > nothing or 50% applied
    1. Smart Sharpen (SS) shows changes from sliders in SS dialog box AND on underlaying image in PS  but  checking and unchecking the Preview box only toggles the image in PS, the SS dialog box does not change.
    2. After clicking 'OK' SS does not  seem to apply at normal ranges but when the radius is cranked up to super ugly it appears to apply at about 50% (Opacity and Fill are at 100%).
    Related Problem:
    After using 'Camera Raw as a filter' on a new merged layer, then adding a layer mask, and then painting with a brush at 100% opacity and Flow, it appears that only about 50% opacity is applied to the mask from the brush.

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • How can I fix problems with Bridge CS2 for Mac.

    How can I upgrade Bridge CS2 version 1.0.0.545 to Bridge CS2 version 1.0.3. The Installer says that I have a newer version installed. I am running a special version Photoshop CS2. When I launch Bridge CS2 v.1.0.0.545, I get a window saying that "Sorry, a serious error has been detected."  This software stays open after clicking the OK button. Please help!

    Spent a long time on phone with Apple tech support on this.  Here's what users all need to know:  it's likely the car manufacturer who needs to upgrade the vehicle software.  Pairing problems can happen whenever a phone is upgraded.  Now to find a dealer that's open after work!

  • How do I fix problems with iTunes Store timing out when I search for music?

    So, I downloaded iOS 7 not too long ago. However, when I tried to do a search on the iTunes Store app, it keeps timing out (it also stalls when I attempt view a song list on a specific album. My phone has no cosmetic or liquid damage, and. I have already performed a soft reset on the phone. Does anybody have a solution, or is this just a bug in the new software that needs to be fixed?

    Also having problems connecting to the App Store without it timing out.

  • How do you fix problems with Apps that never update but instead shutdown

    How do I update Apps.? Every time I hit the update but my app no longer works and the app icon goes black .

    Hi poppahayden,
    If you are having issues with updating your iPad's applications you may want to try a couple of things to troubleshoot.
    First, I would try restarting the iPad -
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/HT1430
    If the issue is still present, you may want to restore the iPad as a new device -
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How can i fix problem with audio in my iPhone 4 ?

    please I can`t hear any audio only through speaks in my iphone 4.
    WHY? PLEASE HELP ME

    go to settings > general > usage > music app under the storage section > slide across the bar that says 'photo library' and a red delete button will appear
    you can also plug the device into your computer with itunes, go to the photos tab at the top center and uncheck where it says 'sync photos.' then press 'apply' in the bottom right corner. this will erase the photos that were synced to your phone from the computer

  • How can I fix problems with freecorder?

    Ever since I installed Freecorder, I keep getting new akamai windows opening.

    hello brotmark, freecorder is adware - if you don't like to see ads please remove the program again and run a scan of your system with tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.

  • How do I fix problem with face time on my iPhone 4S

    I just got a new iPhone 4S I wanted to FaceTime my friend but I didn't have the option to and I don't have the FaceTime app on my phone.

    Where did you buy this phone?  Where are you located?
    Go to settings - general - about - model - do you see AE
    Double check your restrictions.

  • How to i fix problem with EULA - it won't 'accept' when clicked?

    I have moved my CS6 onto a new laptop and everything else is operating fine except Acrobat x Pro. When the licence agreement window pops up, I click on accept, the window disappears for a few seconds then reappears again as if I never clicked on it in the first time.
    Customer support instructions (reference  186070095) are way beyond my realm of understanding, and instructions weren't relevant for windows 8.
    Can anyone help? I need this today for work!

    Hi justick9,
    Please try the suggestion mentioned in the link: http://www.ehow.com/info_12217860_adobe-acrobat-pro-doesnt-remember-eula.html
    Regards,
    Rave

  • How do I fix problems with my iMessage?

    My iMessage has been acting up since the day I bought my new iPhone. Sometimes it won't send iMessages or pictures through iMessage and also my number appears in gray in the "send & receive." I tried signing in and out, turning my iMessage on and off, deleting my email, restarting my phone, even resetting my phone. Nothing seems to work. I have my number saved into my phone, I've tried pretty much every thing there is that I can do. I don't know what else to do

    It sounds like you have two issues:
    1.  Your number appears in gray in "Send & Receive".
    That's perfectly normal in the "You can be reached by iMessage at".  That is your phone number and you cannot change it.  Hopefully you can check that number in the "Start new conversations from" area.
    2.  Sometimes it won't send ...
    That could be for one of two reasons:
    a.  The recipient is not in a WiFi area, and does not have cellular coverage by a cellular provider that supports iMessage (most do not).
    b.  Either you are not in WiFi or your signal strength is not so good.

  • How can I fix problems after Lion OSX install?

    Just a couple of weeks after installing Lion, I am now experienceing the following problems:
    Tremendous slowdown in system use without any obvious reason
    I can't upload videos directly from iMovie to YouTube. It completes the upload, but I never see the video on the YouTube site, even after several days!
    I can't change my Desktop background. Whether I attempt from my pictures folder, or using System Preferences, after I highlight the picture I want to change to, nothing happens

    Try reinstalling:
    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • How do I fix issue with no sim installed on ipad2?

    All of sudden my ipad2 64gb reported it has No Sim installed. Have tried various suggestions, any new ideas?

    http://support.apple.com/kb/ht1414  If that doesn't work get a new sim.

  • [svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

    Revision: 3216
    Author: [email protected]
    Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
    Log Message:
    Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
    Bugs: MXMLG-228
    Reviewer: Deepa
    QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-228
    http://bugs.adobe.com/jira/browse/MXMLG-228
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

    Hello Antonio;
    After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
    I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
    PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
    http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

  • Problem with Photoshop Elements Printing

    I have been using Photoshop Elements for a couple of years now and know it pretty well.  Today while attempting to print, a strange problem came up:  After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image.  How do I disable this function?

    Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have.  Am I looking in the wrong place?
    Date: Mon, 3 Sep 2012 11:14:57 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Photoshop Elements Printing
        Re: Problem with Photoshop Elements Printing
        created by 99jon in Photoshop Elements - View the full discussion
      Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver. 
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for