How do i fix the inability to establish two-way communication between my computer and the printer?

HP Photosmart 5510 e-All in One Printer B111a
Windows XP
Message "The computer is unable to establish two-way communication with the device."
Installed new printer
I'm simply trying to get the estimated ink levels.

Please make a Genius Appointment and take it in for service.

Similar Messages

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Unable to establish two-way communication with the printer

I have a HP Photosmart B8550 large format printer, but failed recently to print the whole page, but only one third of the page. The OS is Window 7 in my commuter. I downloaded the driver from HP website, but it is not working. The result of the failure is "The computer is unable to establish two-way communication with the device." One of the reasons I guess is that I failed to register my printer because I had no way to finish the registration, because there is no further process even if I put my printer name or number into the required block. Anyhow I failed recently to print anything in the printer. I am seeking the support after a lot of tries. Thanks.

I have two HP computers and two HP Photosmart B8550 printers. A month ago printers were not working. I tried in vain in two computers to download new HP software and driver from internet and got the HP Solution for install error - Windows 7. Based on this Solution on desk, I tried many many times to follow every step, but the result is the same: Fatal error during the installation.
By using other tools like HP Printer Diagnostic Tools, HP Print and Scan Doctor, I failed too because the diagosis or the choices are not accuate. For example, the printer is disconnected. It is wrong even if I changed ports and USB calbe again and again. The control panet can prove that there is communication, but the printer cannot work as directed. There is no way to test the printing as Doctor requested, saying the computer is unable to establish two-way communication with the device, which is not helpful to go ahead with the solution. There is no way to register the printer because there is no such a model HP Photosmart B8550 in its list after search.
It is even worse that the new window dialogue asked me to find HP Photosmart Essentials in my computer to install it again and again, and I could not concel the request whenever I open my computer.
I guess the HP printer software and driver has something wrong in its root design, which leads me to failure in installation so that the computer could not recognize my printer. In short, the new HP software and driver makes my printer not functional.
By the way, my two printers can work internally in printing sample paper and report and two computer are working in perfect condition.

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Computer unable to establish two-way communication to J4580 through Airport Extreme

I have my J4580 connected to an Airport Extreme base station via usb. I've installed the printer software on my HP laptop (Vista) and Bonjour recognizes the printer as networked & installed, but when I try to print, i receive an error message "Computer is unable to establish two-way communication with the device" and the printer queue shows an error. I've attempted to find a solution through the posts, but haven't seen much that seems to apply to J4580. Any help??? Thanks!

I came across this similar problem and spent days trying to figure it out. I knew I was close when I tried to start the HPZ12
service and it kept failing with "unable to find the specified file". I traced it with a process monitor and found that it was looking
for a registry key that was not present. Specifically:
HKLM\System\CurrentCosntrolSet\Services\Pml Driver HPZ12\Parameters
It was looking for the string:
ServiceDLL which should be set to:
C:\WINDOWS\system32\HPZipm12.dll (or something similar)
The unfortunate thing is that no matter how many times you install and uninstall the HP drivers, then don't reset the registry keys
for the HPZ12 service. In the end, I ended up doing the following:
1. Uninstall software and reboot
2. Go through registry editor and delete the PML key (just did a search for all PML occurences)
3. Deleted the c:\program files\Hewlett-Packard directory
4. Deleted the c:\program files\HP directory
5. Deleted the c:\windows\system32\spool\drivers\w32x86\ contents (anything that referred to an HP printer or driver)
6. Deleted the HKLM\Software\Hewlett-Packard registry key
7. Rebooted
8. Reinstalled and everything worked.
I suggest you backup any registry keys prior to deleting them in case you make a mistake. You can use the Export feature on
the right-click context menu to save each key you delete, or use some tool to make a backup of your registry prior to making
these changes. Similarly, for the files, I renamed directories or created backups of their contents.
Once I reinstalled, I found that there were TONS of new registry keys added that weren't there before. So the real problem is
with HPs install/uninstall. It doesn't clean up properly and any aborted or failed instalation will leave the drivers in a poor state.

Error message saying "unable to establish two-way communication with device"

I have an HP C309a printer/scanner/fax. I have recently reconfigured it to work wirelessly instead of via the USB cable, which it does. But if I try to go on to the HP Solution Centre/Settings/Printer Toobox to clean the printheads, it tells me that this cannot be done because "the computer cannot establish two-way communication with the device".
If I plug the USB cable back in, I can clean the printheads fine.
Does anyone have a way of allowing me to clean the printheads without using the USB cable?
roger

Hi rogercorke,
I believe you can also clean the printhead from the printer control screen. Press the Wrench button from the printer Home screen and then press Tools>Clean Printhead.
If you need to use this feature wirelessly, try running the HP network diagnostic utility on your wireless setup and see what it says: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/foru...
Please click the blue Kudos star in the post that helped you.

Cannot print to my hp 7500. diagnostics says computer cannot establish two-way communication.?

cannot print to previously functional HP7500 on wireless network card. All reports from printer say everything is working fine (network card and printer), but computer says it cannot establish two-way communication. What do I do?

pcunning, I would recommend running this utility and seeing what it shows - or resolves:
http://goo.gl/u3jDE
Let me know!

HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad.
I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

Yes.
Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
Regards
TD

HT204053 i used the same apple id for my iphone and my husbands now all our contacts and such are on both phones how do i fix this. I dont need his contacts on my phone and the other way also. Should i create a different icloud account for his phone?

I used the same apple id for my iphone and my husbands now all our contacts and such are together. How do I undo this? Do i create him a different icloud account?

Yes, start with deleting your account on his device:
(Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)
In the next step, create a new account on his device:
(Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)

How do I fix error code 401 - "unauthorized" I am taking an online class and the videos worked before, and now whenever I launch QuickTime, I get that error code.

I recently began taking an online class. We are required to watch multiple videos. I was able to watch the QuickTime videos before, but now whenever I launch the videos in QuickTime I get the Error code 401. My teacher does not know whats wrong, because I do have authorization to watch the videos, I am just not sure how to go about it.

You may try updating the same as a standalone download.
S.Sengupta, Windows Entertainment and Connected Home MVP

HP Laptop Computer, computer is unable to establish two way communication with the device (printer)

HP Laptop Computer, Windows 7-64bits, no changes made to the system before issue occured.
Printer: HP Photosmart Plus all-in-one B210a series.
When I click onto my Ink Levels for my printer in my computer it goes to 63% and stops. Then it says; The computer is unable to establish two way communication with the device. All systems are up and running and there is no reason I should be having a problem.
I can print, Fax and Scan, I don't get blank paper from printer, printer is not jammed, nothing in Queue to stop it from printing. It just won't show my Ink Levels from my computer.
This question was solved.
View Solution.

@marymay222, I will be glad to assist you on how to uninstall the software and drivers for the printer.
1. Click on the start menu
2. Choose all programs
3. Select the HP folder
4. Highlight the printer name
5. Select the UNINSTALL tab
This will uninstall the software and drivers. After it completes, reboot the computer.
When it comes back on, insert the CD, if you still have it. If you do not have the CD, you can download the drivers from the website.
http://www8.hp.com/us/en/support-drivers.html
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

OfficeJet 8500-A910 unable to establish two-way communication with the device

I have an HP OfficeJet 8500 A910 installed a couple months ago. On first install the HP software could communicate with it from two computers--one XP and one Win7. Now I can scan to the locations I setup before and print from both computers, but when I try to run the HP software that was installed and working on either computer, I get "...unable to establish two-way communication with the device". I have tried all the troubleshooting and downloaded the diagnostic tool. I have disabled both the Norton and Windows Firewalls.
Any suggestions would be appreciated.

I have a similar problem. Brand new HP Officejet Pro 8500A Plus, wire-connected to router.
I am unable to print/scan/fax on my Windows XP when Symantec Endpoint Protection is turned on. I have to disable it to be able to print/scan/fax.
I can do all capabilities with my Win7 computers. This seems to be a Win XP related problem.
I have checked for HP PML service...not listed. I show HP Port Resolver and HP Status Server and PML Driver HPZ12 started.
Doesn't bode well for keeping Viruses and other malware at bay. Any suggestions?

My problem is that my iCal won't sync from my first-generation iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud.

I'm just an old lady who doesn't know a lot about this stuff, but I do love my iPad and miss my portable calendar! My problem is that my iCal won't sync from my (first-generation, cheaper of the two models) iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud. I've had this problem for nearly a year now. My Really Really Smart son couldn't fix it for me.

djb53 wrote:
Can take some time.... how much time?
There's no simple answer to that. My calendar goes back to 2004 and is moderately busy; it took around an hour. It's possible that you've hit a slow period on the server - it happens.
In order for it to work, your calendars should show on the MobileMe site, they should be listed under your MobileMe login name in the calendar list in iCal (calendars listed under 'On My Mac' will not sync) and your MM account details have to be entered in iCal Preferences>Accounts (this should have happened by itself).
If it's not working please see the page I linked to.

Why aren't my notes syncing on the PC while it's working well between my iPad and iPhone?

Hi, so I'd like to know how could I fix this issue. Notes are working great between my iPad and iPhone, but I just can't get to see my notes on icloud.com what can be the problem?

Hi there Flesch,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

How do i fix the inability to establish two-way communication between my computer and the printer?

Similar Messages

Maybe you are looking for