How do I fix the mixed up phone numbers an name after upgrade?

Wrong names appear with correct phone numbers, WHY? This began after last Apple upgrade.

If you're talking about Contact entries, your contact data was corrupted during the update. Nothing at all to do with the update itself. If you have a good backup, restore it.

Similar Messages

How can I change the order of phone numbers in a contact?

I have contacts that have more than one phone number (I am sure we all have those in this day and age). The importance of the phone numbers varies over time and I want to have the most important one as first on the list. How can I change the order that phone numbers are displayed within a contact?
Thanks for any help.

Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

How do I fix the gray screen and non responsive cursor after iMac sleeping?

How do I fix the gray screen and non responsive cursor after iMac sleeping?

If you're running OS X 10.8.5 or earlier, then from the menu bar, select
 ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.

How do I change the order of phone numbers in a contact?

When I enter phone numbers for a contact on the iPhone, they seem to be stuck in the order they were entered. Is there any way to change the order using the phone interface? I sync with Yahoo Address Book. Will the order be preserved if I change the order there?

Ditto! I am having the same problem. Anyone?

Mixed phone numbers and names after sinc N9 and ov...

I have problem with my contact list. After i synchonised my previous N79 with N9, everything was fine. AFter adding new contacts to the new phone i wanted to synchronise it with ovi, i did so but it made completely mess with all my contacts. I cant say if i miss any numbers but it was way worse, it has mixed up names and numbers without any sence so I realised that under name A i had a phonecontact of B and C. At some names were suddenly no phone numbers. And some of them were even doubled - like there was the same number saved under both A and B but it belonged to C. I hate it, had to rewrite all the ontact list manually along the old phone. That took me hours if anyone can imagine. Now Im not brave enough to try the sync again eventhough i need to do that... Anyone having the same problem or even better - solution?

Try plugging your iPad into your computer and opening iTunes. Select your iPad underdevices on the left side of the screen and right click. You should be given an option torestore from a backup.
If this option is not available to you, you can go through the Summary tab of your iPad on the right side of the screen and if you scroll down under iCloud you should get an option to restore from a previous backup, where you select the most recent backup to put on your iPad.
Hope that helps.

How do i fix the skipping audio on itunes 10.7. after update

After updating itunes to 10.7 all of my music will randomly skip or become choppy. Does anyone have any suggestions as to how this can be fixed ?

If you run Windows Media Player does it have those tracks? WMP is a likely candidate and may have moved the tracks where it wants them to be. If so I can offer some advice on how to get WMP to leave your iTunes library alone and some scripts to repair the damage.
tt2

How do i fix the "web form must capture customer name and email address" error?

Hi all,
I have a webform that is submitting securely to the bc servers. I get the response:
{"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page." }}
I have verified that the "FirstName","LastName","EmailAddress" are actually gettting sent with their corresponding values. I can't seem to figure out why i keep getting this error. Can someone please lend a helping hand?!? Thanks guys... here's my code:
var rAction = 'https://site.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=85886&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}&CC={module_urlcountryc ode}&Referrer={module_siteurl,true,true}&JSON=1';
var rData = 'FirstName='+escape(fName.val())+'&LastName='+escape(lName.val())+'&EmailAddress='+escape (email.val())+'&Username='+escape(username.val())+'&Password='+escape(passwd.val())+'&Pass wordConfirm='+escape(passwd2.val())+'&BillingAddress='+escape(baddress.val())+'&BillingCit y='+escape(bcity.val())+'&BillingState='+escape(bstate.val())+'&BillingZip='+escape(bzip.v al())+'&PaymentMethodType='+escape(paymentMethodType)+'&CardName='+escape(cName.val())+'&C ardNumber='+escape(cNum.val())+'&CardExpiryMonth='+escape(expMonth)+'&CardExpiryYear='+esc ape(expYear)+'&CardType='+escape(cType)+'&CardCCV='+escape(ccv.val())
$.ajax({
type: 'POST',
url: rAction,
data: rData,
success: function(msg){
console.log('success');
$('#result').html(msg);
error: function(msg){
console.log('error');
$('#result').html(msg);

Ok -- after testing this out a little on my own I think it must have to do with not properly serialzing the data you are passing in the ajax function. In the example I linked to earlier they are just serialzing the form data and it works because it converts the data in the form's input fields to URL encoded notation.
If you aren't using an actual form on your site to mimick the example I linked to then when building your "rData" string instead of using the "escape" function for each of the parameter values, you should be using the "encodeURIComponent" function instead which instead of escaping characters will convert it to URL encoded notation. That's probably your issue. Here's more about encodeURIComponent(): http://www.w3schools.com/jsref/jsref_encodeURIComponent.asp
Try this with the rData variable instead:
var rData = 'FirstName='+encodeURIComponent(fName.val())+'&LastName='+encodeURIComponent(lName.val()) +'&EmailAddress='+encodeURIComponent(email.val())+'&Username='+encodeURIComponent(username .val())+'&Password='+encodeURIComponent(passwd.val())+'&PasswordConfirm='+encodeURICompone nt(passwd2.val())+'&BillingAddress='+encodeURIComponent(baddress.val())+'&BillingCity='+en codeURIComponent(bcity.val())+'&BillingState='+encodeURIComponent(bstate.val())+'&BillingZ ip='+encodeURIComponent(bzip.val())+'&PaymentMethodType='+encodeURIComponent(paymentMethod Type)+'&CardName='+encodeURIComponent(cName.val())+'&CardNumber='+encodeURIComponent(cNum. val())+'&CardExpiryMonth='+encodeURIComponent(expMonth)+'&CardExpiryYear='+encodeURICompon ent(expYear)+'&CardType='+encodeURIComponent(cType)+'&CardCCV='+encodeURIComponent(ccv.val ())

I cannot see all mobile phone numbers in Messages after upgrade to iOS 6

I have two mobile number entries for most of my contacts, for example:
+853 1234 5678
0060 853 1234 5678
The first entry is for dialing the mobile number when I am overseas, and need to use the international prefix "+". I also use this for sending SMS messages or iMessage.
The second entry is pre-entered to use 0060 as the international prefix when dialling long distance from my home country; this enables me to enjoy lower long-distance rates.
I have since upgraded to iOS 6, and now have a major problem. When I go into Messages and start a new message, I cannot select the number "+853 1234 5678" to send my message. It only shows "0060 853 1234 5678", and of course, this cannot be used to send messages. This seems to me that iOS 6 is not distinguishing the above two entries as two unique numbers. In other words, the "prefix" does not count. However, if I change the "0060 853 1234 5678" to "0060 853 1234 6787", then I can see both numbers in Messages (since then, both numbers are unique).
I have since found out through trial and error that if I list the numbers in my contacts page in the reverse order, that is:
0060 853 1234 5678 and then
+853 1234 5678
then, I can see +853 1234 5678 but not the first entry. It seems that the first entry in the contact list is overriden by subsequent entries of the same mobile number.
This was not a probem in iOS 5. Any fix for this matter in iOS 6?

tanks for ur help. it is sms. I have contacted my service providers and they said there is no issue with my messages. so I believe something is wrong with the fone.
tanks

My IPhone 5 is rebooting many times, during charge and using. How can I fix the problem?

My IPhone 5 is rebooting many times, during charging or using. How can I fix the problem? All this problem began after I charged my phone in an aircraft with the USB Port.
thanks

Update to iOS 7.1.1. Then bring it to an Apple Store if it isn't fixed.

How do you fix the 2 to 3 second voice delay when answering iphone 5 this is with multiple carriers and its unaceptable on a phone that cost almost 700 dollars it did not happen on my cheap prepay samsung

how do you fix the 2 to 3 second delay on hearing somones voice when answering the iphone 5 this happens on lots of iphone 5s with differant carriers so its not one carriers problem its probably apples this is unacceptable on such an expensive phone and very irratating. my last cheap samsung t mobile 50 dollar pre pay never did this,im new in my contract an will take the phone back if i have to put up with this for 2 years.other than that huge problem i love the phone. i dont understand why this did not get covered like the maps problem,cause its a lot of phones and its probably an ios problem.

Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

Is it possible to uninstall the latest kitkat update ("improvement")? If not, how can I fix the problems it has created?

The latest kit kat "improvements" have made using my phone much more frustrating. How can one roll back this operating system update to the previous version? If it is not possible to roll it back, how do I fix the following issues?
1) The battery timing has been greatly diminished.
2) Gmail isn't syncing properly. At least 7 times since the update, upon opening gmail, I see lists of messages that are sometimes over a year old, and not my current ones.
3) The sound slider bar on the open screen has disappeared. It now takes 4 steps in order to get into settings, and temporarily turn off the sound. That is ridiculous when entering a meeting. Not to mention that you have to repeat those steps upon the meeting's end.
4) Searching for a particular contact in people has become more complicated--much easier to select "m" when looking for Mary's info than to have to scroll through the very JITTERY and way too touch sensitive sidebar all the way to the "M's" to even begin to search through the M's. This is way too unwieldy.
5) Emoticon symbol has replaced the symbol to move to the next line in text messaging keyboard. I am not interested in childlike emoticons. I am interested in writing a coherent professional message with appropriate spacing.
Any suggestions will be greatly appreciated.

You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

Hi, you know how i can fix the problem that my iPhone5s not have any coverage in place? Please.

Hi, you know how i can fix the problem that my iPhone5S not have any coverage in place?
Please, and thanks.

If it's out of warranty, Apple will replace your phone for $269.

How can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4

how can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4

The term "factory unlocked" has no meaning. Your phone was not legitimately unlocked. Contact the carrier it is locked to and find out if you can get it unlocked.

How do I fix the mixed up phone numbers an name after upgrade?

Similar Messages

Maybe you are looking for