How do I fix the scrolling when using my iPhone on my laptop to select which Podcasts I want to add?

When I plug my iPhone into my laptop and then click on Podcasts, it won't let me scroll to choose which Podcasts I want to add. To fix that, I click on one of the Podcasts and then it is sort of fixed, but then I can't scroll through each individual Podcast episode. I thought it was because my laptop was just old, but I now have a new one and the problem is still there. Does anyone know how I can fix this?

Hi Playerking95,
Welcome to the Apple Support Communities!
It sounds like you are trying to sync Podcasts from your iTunes library on your computer to your iPhone. In your situation I would recommend reading over the attached article for information.
Podcasts for iOS: Sync podcasts
http://support.apple.com/kb/HT6202
Have a great day,
Joe

Similar Messages

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

How do you fix the ipod when its not playing the music right when it makes noise

How do you fix the ipod when its not playing the music right when it makes noise

Hi Nicole,
Try resetting it (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). The Home screen should redisplay after the reset is complete.
Cheers,
GB

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

TS3297 how i can fix error 1015 when i restore iphone 3g ?

how i can fix error 1015 when i restore iphone 3g ?

You can't. Error 1015 occurs when trying to restore a jailbroken phone.
Jailbreaking your phone voids any warranty remaining with Apple and forfeits your right to any assistance from Apple including from this forum.
You're on your own. From what other people have posted, it's extremely unlikely you'll ever get your phone working again.

How do i see the thumbnails when using File Explorer

How do I get to see the thumbnail preview when using File > Open?

Not sure if this has been answered yet, but Illustrator thumbnails aren't showing in Creative Cloud Web file list. Also, anywhere to quick preview/navigator the file?

Does Mainstage 2.2 fix the bug when using Ultrabeat as your click track / metronome?

There was a bug where the Ultrabeat sequencer would run, but no sound would come through the channel strip. It's pretty annoying to have to pay $30 for a bug fix, but I might do it, if it would indeed fix the bug.
Does anyone know? Thanks

I'm currently using UB as my click track. I created a custom template in UB and imported my click samples. I do not set up UB at concert level but instead set up UB at each one of my SETS level. I set the tempo and time signature under each SET.
I then map a button to ACTIONS>PLAY/STOP not to CLICK(name of channel strip)>ULTRABEAT (Drum Synth)>SEQUENCER PLAY/STOP. This allows me to stop and start the click track and for the drummer to count the song off whenever he feels like.
I then use PLAYBACK to play my backing tracks in time with the click. I map a button for PLAYBACK to NAME OF PLAYBACK TRACK>PLAYBACK>TRANSPORT>PLAY/STOP (From Start).
Under my PLAYBACK options I set SNAP TO>BEAT and PLAY FROM>CURRENT POSITION.
The only problem I've found with this is that if you start the PLAYBACK before the UB click it will turn on the UB click. Other than that it has been working well for me.
Also, add a button mapped to PANIC somewhere in your setup so you can cease any/all midi/tracks at anytime.
Devin

How do I fix the email domain used in my apple ID?

The valid domain is yahoo.com.ph but was able to login with only yahoo.com. Now, I cannot reset my password because I don't receive the code when I use the email @yahoo.com, and iForgot tells me that the @yahoo.com.ph one is not a valid ID.

Go to https://getsupport.apple.com . Click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. If you have any problems with that try this form: https://www.apple.com/emea/support/itunes/contact.html

I bought a song the other day and it only downloaded about a third of it. How do I fix the problem when iTunes doesn't recognize the mistake?

Bought a song the other day and it did not download correctly. I am over 50 and a little new to using this technology so please pardon me if it is an easy fix. iTunes will not allow me to download it again or to even buy it again, so I cannot figure out how to fix it. Any help will be greatly appreciated.

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How can I fix the problem when I can't completely erase find my iphone from my mac? It says "pending erasa find my iphone until your iphone connect to the internet". My iphone already connected to the internet and it still doesn't work. Anyone have idea?

Actually I want to restore my iphone from my mac but I can't because it says "go to icloud settings on your iphone and turn off find my iphone before restore your iphone". Then, I go to icloud.com and erase find my iphone. But I still can't restore my iphone because it says pending to erase your iphone until your iphone connected to the internet. My iphone already connected to the internet and it still says pending. Please help me to fix this problem because I need to restore my iphone.

Hello rxander21,
Force your iPhone into recovery-mode and then you can use iTunes to restore it.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can you see the progress when using a ForEach loop?

Hi,
I have an array with about 100 containers in it. My main thread uses a ForEach loop with an inner case structure with six possibilities. My previous program had all the steps in a very long list, executing them one by one. I find this new approach is much nicer to look at, and easier to change, but there isn't really any way of telling how far along the test is (unless you know it by heart). In the long list approach, you could see all the Done/Passed outcomes and how many remained, now there is no way of telling.
Any tips on making some kind of progress indication?
Solved!
Go to Solution.

As ObjectReference parameter, you should use 'Nothing'. The last parameter (synchronuous?) you can choose true or false. Please refer to the documentation of PostUIMessageEx for further information.
The numeric parameter should range between 0-100. Since it is "Progress Percent", this makes sense, does it?
The status bar has several panes, one e.g. displaying the logged in user or the used process model. The pane on the right most side will display the Progress Percent if used in your sequence.
The default reporting, as already stated, includes this feature. So if you have a sequence with e.g. 500 steps, the reporting "will have a visible progress" in that pane (with less than 100 steps, it is most often too fast to see). Remember that NI Sequence Editor and the Full Featured User Interfaces do have this feature, the Simple UI does not have it.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How can I fix the bug when it won't let me update?

Tech support gave me the fix but its not working. And he said it was fixed in the last update but my App manager says that Muse is up to date.
This is the bug that locks up when publishing via FTP. "ADOR"
Please help.

Hi,
Are you still experiencing this issue, if yes, please check this thread, FTP upload freezes when uploading to servers

How can I rotate the view when using my surface tablet in a docing station

previous answers suggest to rotate the tablet which does not work in this case.

Bernd, great to hear the message again. But this is ab big issue to use Adobe Reader in professional environment with my tablet in a docing station conected to a 24" screen: "Just turn your tablet" does not work in this case. Is there a chance of an update soon or is it possible with Adobe Profesional?

How can I magnefy the screen when using firefox

I have seen in other Browsers that you can magnify the screen by choosing 100% or 150%, etc.
Please how can one do this in Firefox.
Thank You
Alvaro Gil Fernandez

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How to get 2 finger scrolling when using windows on mac?

I just recentley put windows on my mac and i have installed all of the drivers for it to run but im having trouble with a few things like the f keys wont work for brightness or keyboard brightness and the other thing that wont qork is the 2 fingered scrolling then the volume buttons.

In Windows there is a task bar located in the lower right of your desktop. There is a Bootcamp icon there, if you installed Bootcamp in Windows. Click on the icon and open the Bootcamp control panel. Select the keyboard and trackpad tab then set up your two finger scrolling etc.

How do I fix the scrolling when using my iPhone on my laptop to select which Podcasts I want to add?

Similar Messages

Maybe you are looking for