How do I fix the sound quality when using my IPhone 4s Streaming Bluetooth via UConnect to Media Center 430 RBZ in my 2011 Dodge Ram?

I'm using an iPhone 4s.....When I stream Bluetooth audio via UConnect to Media Center 430 RBZ, the quality is pretty bad. I've been looking at a million different websites in hope for an answer, but have not found any luck. 
Does anyone have a solution to my problem?
Does anyone know if this a problem with the phone or my stereo?
Thanks for the help!
Nick

I think it is also done by edwardquan:/discussions/board/message?board.id=smartphones&message.id=52200&query.id=227350#M52200
Two reviews two thumbs up!!!!

Similar Messages

  • Poor sound quality when using air play

    How do I fix poor sound quality when using air play with my Denon receiver?

    I am not too sure if this is affected by BT software stack or RF design...
    iPhone 3G with FW 2.x provides Cisco VPN as well as Email support for corporate usage. However, it's weird that business man wouldn't want to use BT headset and talk to people... We are not asking about new feature support, like A2DP, but reliable, stable BT connection ONLY!!
    I've read that lots folks spent a lot of money on purchasing many different BT headsets and tried to get it work with iPhone 3G. I myself tried: Plantronics 510/815/855, Sony HBH-DS970/980, Nokia BH-903. None of them can work fine with my iPhone 3G ever! And iPhone 3G even cause BH-903 and DS-980 hang up after pairing or finishing call!!
    That's why I don't believe it's just a "SPECIAL CASE". How could a product FOR BUSINESS purpose get this kind of basic function problem?
    I hope we will find this issue could be resolved completely with new F/W, like Safari crash problem before. Other than this BT IOT problem, iPhone 3G is really the phone/companion could provide complete solution fulfill my personal and business needs.

  • How do I fix the audio quality on my iTunes? It sounds very distorted.

    How do I fix the audio quality on my iTunes? It sounds very distorted.When listening to audio from other websites or programs, it sounds absolutely fine. Only when listening to music on my itunes is when it sounds awful and distorted. Please help.

    Artwork doesn't sync with music in ipod...: Apple Support Communities
    next try
    - Unsync all music and resync
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
    HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    Molnar are you receiving that error during the download or install process?  Also which operating system are you using?

  • How do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    how do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • How do you fix the sound in a mac if it is becoming choppy?

    How do you fix the sound in a mac if it is becoming choppy?

    Hi two864,
    If you are having issues with the audio on your iPhone, you may find the following article helpful:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Regards,
    - Brenden

  • How can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

    how can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

    Search this forum.  Your issue has already been addressed ad nauseum. 
    Best,
    GDG

  • Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

    Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

    You should be able to turn off the door bell (or similary named feature) with your phone bridge. This is a function of the phone bridge, not Adobe Connect. There is probably a star command to turn the feature off. If we knew what phone provider you used, then a link could be provided to their commands.
    As to the loud thud, I'm not sure what you mean by that. Maybe ask your attendees to hang up gently?

  • How can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4

    how can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4

    The term "factory unlocked" has no meaning. Your phone was not legitimately unlocked. Contact the carrier it is locked to and find out if you can get it unlocked.

  • How do you update the Bios safely when using onboard RAID mirror? Z87-G45

    How do you update the Bios safely when using onboard RAID with Z87-G45?   I'm using a simple two drive, RAID 1 mirror setup.
    I'm currently at bios 1.4, and want to move up.  However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF*  bare-metal reinstall required.   
    My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed.  It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
    I do not want to rebuild my PC again simply because I do a BIOS update.

    FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
    based on this RAID surprise should not hapends.
    But as pandaz says if you have no issues, leave bios update alone.
    there are still risks something to messed up,
    best do a backup of your data just in case if you want to try latest version

  • How do I fix the "error occurred when attempting to change modules on an I Mac". The solutions on the web are totally confusing to me?

    Does anybody know how to fix the "error occurred when attempting to change modules" on an I Mac??

    http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html

  • How do I change the default quality when saving a series of edited photos in Photoshop Elements 9

    Say I have saved a series of edited photos using Quality 5. I then change to saving a new series using Quality 10. Each time I save a photo the quality appears as 5 and I have to change it manually to 10. Eventually the default quality will automatically change to 10, but it takes a fair numbers of saves to do this. How do I get the default quality to change as soon as I want it changed rather than having to wait for the software to finally do it itself?

    Interesting point. My situation is where I change the default quality then carry on using the new quality without closing down the program. What you are suggesting is that changing the default quality,  closing down the program, then restarting it might get the quality change to stick. I'll give it a whirl and see what happens.

  • How do you fix the sound problem due to software 10.6.8

    my speakers work when i turn on my computer they make the sound but when i try to listen to something on itunes it doesnt work.

    obush1 wrote:
    when i try to listen to something on itunes it doesnt work.
    What's iTunes' volume setting?

  • HT4623 how can i fix the problem on ios 6.1.3 in my bluetooth and wifi connection?

    how can i fix the problem on mi ipad mini. When i updated the ios to 6.1.3 the bluetooth and wifi didn't work properly.

    Hey maricel737
    There are two different articles that go over troubleshooting steps for solving issues with Wi-Fi and Bluetooth. This first one goes over Wi-Fi on your iPad:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    This next one outlines suggestions for Bluetooth on your iPad:
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    On the Bluetooth one, I'd just skip ahead to the "Additional Information" section where the troubleshooting steps start.
    Best,
    David

  • How do i fix the sound on an iPhone 4S? When i play music the sound bar at the bottom disappeared and when i try to adjust sound with the buttons on the side, nothing happens. Also the sound in my apps is not working.

    The sound isn't working. And it also does not appear, when i try to adjuct it with the buttons the sound bar doesn't appear and when i try playing music at the bottom the sound bar disappeared. How do I fix this?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.  Have you gone through ALL of these troubleshooting steps?
    If you have gone through all the troubleshooting steps and you're still having problems, you'll need to bring your phone into Apple for evaluation.

Maybe you are looking for

  • Fixed lengh file processing

    Hi All, I'm doing fixed lenghth file by small example. but my receiver adapter is showing following error Receiver Adapter v2123 for Party '', Service 'F1_BS': Configured at 2006-04-19 17:28:19 BST No message processing until now Following is my conf

  • SCCM 2012 Application Catalog shows ALL advertised to a user independant of the OS they are using

    Within SCCM 2007 if a package was to be made available only to the following platforms, it would only show up on those platforms... If a user was using Win XP and had a package meant ONLY for Win7 advertised to them, they would not see it.... It seem

  • Adding code in ABAP QUERY

    Hi,   Can any one tell me the way in which i can write some code in the abap query? I need to create one internal table which will bring data from different tables based on some coditions. For all entries in this internal table, I should get data fro

  • Execute stored procedure in html_db

    Hi there, is it problem to execute a stored procedure in html_db? Must I modify a lot in the procedures... CREATE OR REPLACE PROCEDURE insert_order p_fname IN emp.fname%TYPE, p_lname IN emp.lname%TYPE, p_orderno IN emp.empno%TYPE IS BEGIN INSERT into

  • Array elements that respond as links

    I have a small applet that I need help with.  It is a large gear that rotates CCW when you click the top button and CW when you click the bottom button.  Clicking the buttons also retrieves the next element in an array called 'title' and displays it