How do I fix this? "Firefox is unable to start correctly (0xc0000056)" I can't start in Safe Mode, either.

My Firefox does not open, at all. When I try to open i get the message that says "Firefox is unable to start correctly (0xc0000056)". I have tried to run the Firefox crash report, which also does not run. I'm unable to start in safe mode, also. All I get, is the above message...nothing else.

I'm not using that extension, so I do not know which files are used in addition to sessionstore.js and you need to check the profile folder yourself for suspect files.
This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]<br />
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

Similar Messages

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Firefox 3.6 keeps crashing on opening. Can't open in safe mode, can't see crash logs. HELP please.

    Firefox worked fine last night. No changes/downloads but today it keeps crashing when opening. I downloaded new 3.6 version for mac but same problem. Tried to open in safe mode by going to the terminal and typing /Applications/Firefox.app/Contents/MacOS/firefox -safe-mode but nothing happens. Tried to see my crash reports as per the mozilla (/Library/Application Support/Firefox/Crash Reports/submitted) but the folders don't exist.
    Crash report reads:
    Add-ons: {7b13ec3e-999a-4b70-b9cb-2617b8323822}:2.7.1.3,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.11
    BuildID: 20101012104758
    CrashTime: 1288214674
    EMCheckCompatibility: true
    Email:
    FramePoisonBase: 00000000f0dea000
    FramePoisonSize: 4096
    InstallTime: 1287680805
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 726
    StartupTime: 1288214672
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.11
    This report also contains technical information about the state of the application when it crashed.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352).  ?

    I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment.  The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
    I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running.  There are no other users logged into the machine.
    How can I see what other process is using the needed file so that I can fix it?
    Thanks

    MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so.  Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
    You may want to also consider logging in under a local administrator account to see if you face the same difficulties.  This would help you determine if you are facing a file corruption issue or file permission issue.

  • Firefox crashes at startup, can't open in safe mode either

    Problem started yesterday, can't open firefox at all.

    We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID with '''bp-''' into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • I am unable to hear my callers. the vloume is to low how do I fix this?

    My volume is turned up but I can barely hear my callers when I receive calls. How do I fix this?

    My volume is turned up but I can barely hear my callers when I receive calls. How do I fix this?

  • "How do I fix the Firefox.exe application error?"

    How do I fix this Firefox.exe - Application Error, "The instruction at "0x00000000" referenced memory at "0x00000000", The memory could not be "written" - that appears when I open Firefox?
    == This happened ==
    Every time Firefox opened
    == Opening Firefox

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    Hi SheilaStuhr,
    The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
    Basic troubleshooting
    See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
    Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
    Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
    If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
    Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
    Install the latest version of iOS.
    Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
    If you still see the issue, restore the iPhone.
    If you're still experiencing issues, try the steps below.
    Wi-Fi troubleshooting
    If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
    Turn Personal Hotspot off.
    Turn on Wi-Fi: Tap Settings > Wi-Fi.
    Turn on Personal Hotspot.
    If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
    If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
    See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
    If the other device still can't connect, turn Wi-Fi off and on for the device.
    Make sure that your device can see other Wi-Fi networks.
    Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/en-us/HT203302
    All my best,
    Allen

  • My ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?

    my ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My Apple TV is not playing my purchased shows but my iphone is.  How do I fix this

    My Apple TV is showing that iTunes is unavailable to play my purchases but my iPhone is able to play them. How do I fix this? 

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I emailed a PDF form and when the receiver opens it, the document has errors on it. How do I fix this problem?

    I emailed a PDF file and when the receiver opened it there were errors in the file. Words on the document appeared different and weren't what they were supposed to be. How do I fix this problem?

    What did the errors say? Can you post a copy of the pdf so we can test out. The presets embed the font, but might be a unicode issue, or one of the few fonts which are copyrighted and do not allow embedding.
    What application was the pdf was created from, what settings were used, and if you can outline the fonts. What font or font(s) are the ones reflowing?

  • My IMac is restarting constantly after maverick install how do I fix this?

    My I mac is constantly restarting and the fan has started to constantly run after installing Maverick up day How do I fix this?

    For the fan issue, see if you can reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    That may help the restarts as well.

  • I have a 9300 and the track ball is not working how do i fix this?

    I have a 9300 and the trackball is not working how do I fix this?

    Hi THL1234
    Welcome to Support Forums
    You can try this KB and see if that helps in resolving your problem.If that fails then you may have to replace your  Trackball :
    KB29640 : Trackpad ,trackball, or keyboard not working on a BlackBerry Smartphone.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • I get an error stating the program can't start because FileGDBAPI.dll is missing from my computer. How do I fix this?

    I get an error stating the program can't start because FileGDBAPI.dll is missing from my computer. How do I fix this?

    Hi bethh31640887,
    As already asked by Sara, can you let us know the following information:
    1. What application are you trying to launch? Acrobat or Reader and which version?
    2. What is the OS that you are using?
    3. Can you try launching the application after repairing the product once?
    Thanks,
    Shitiz

  • Mac Mail has stopped wrapping paragraphs 3 days after installing Maverick.  How do I fix this?

    Mac Mail has stopped wrapping paragraphs 3 days after installing Maverick.  How do I fix this?

    For the fan issue, see if you can reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    That may help the restarts as well.

Maybe you are looking for

  • How to deploy and configure custom JAAS login module

    Dear Experts, I have created a custom jaas login module, In my .jar I am having 1. MyLoginModule.class 2. Handler.class 3. MyPrincipal.class I want to know how to deploy the custom jaas module to oc4j. And make available to all other application to u

  • When I open iCal all my delegate's calendars are checked every time.

    Since upgrading to Mavericks when i open iCal or even just maximize it from the dock all my delegate's calendars are checked. My whole work team (8 people with multiple calendars) are listed as delegates so each time I have to uncheck them all to see

  • Internal Tag Stack Error

    I have a Bible reading app from Olive Tree, I have recently installed a new bible translation and now when I open the app I receive an error - "Internal Tag Stack Error: Tag Stack too deep" The only option given is to press OK but then the error repe

  • URGENT: MPLS P/ PE support on 7600/Sup720-BXL and 3750 Metro switch

    I'm need to design a MPLS network for a Cable Operator. They will start small with some Cisco CMTS doing MPLS-PE and needing only two devices to aggregate these PE and delivering Services (Internet connection, VoD, ...) , so they will need to work ha

  • Icloud morceau bibliotheque en apple lossless en quel format sur iphone???

    bonjour, j'ai un compte icloud et itunes match j'aimerai savoir si l musique apple lossless de ma bibliotheque itunes sera convertie en qualité inférieure 256 kbps pour mon iphone ou elle sera disponible en apple lossless?? Je parle bien de la musiqu