How do I fix white screen in Flash Player?

When on a game site using flash player and trying to use full screen it goes to a blank white page.  How do I correct this problem?

I'd like to hear an answer to this as well.  I am having the same problem when I try to load Zynga's games.  The page goes white when it gets to the loading page.

Similar Messages

  • HT1459 how to permanently fix white screen after resetting and restoring

    How to permanently fix a 'White Screen" after resetting and restoring? 2nd generation ipod

    There are two different resets. The reset you did involved holding the sleep/wake & home button.
    The other reset will do exactly what it says. That reset is located in Settings - General - Reset.

  • How to fix white screen of death on iPod 4g after screen replacement?

    How to fix white screen of death on iPod 4g after screen replacement?

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • My macbook pro has white screen with flashing folder.

    my macbook pro has white screen with flashing folder.
    i called the repair services and they say its hard disk problem
    so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
    ps : i dont have warranty

    See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or Mountain Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

    I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

    If you want a short list of third party repair options, here you go.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/

  • HT3743 how do i fix the screen of death on my ipod.....please helpm asap..........my sister is going to kill me

    how do i fix the screen of death on my ipod

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPod nano 6th generation: "Do not disconnect" on white screen w/flashing icon; previously "Connected-Eject before Disconnecting" on dark screen w/USB icon; no content on iPod

    Trouble began with "Reconnect to iTunes to Restore" message after I inadvertantly held down the Wake/Sleep button long enough to turn the iPod off before pausing the podcast in progress.
    My subseqent actions to try to remedy:
    -Restored the iPod
         -while Restoring, the rotating circular arrows and "Synchronizing-Do Not Disconnect" screen appeared followed by "Connected-Eject Before Disconnecting"
         -when I ejected the iPod and disconnected it, the normal icons showed but there was no content
    -Reinstalled the latest iTunes 11.0.3 which I had downloaded previously a few days before my problems began
    -Restored iPod again:  still said "Connected-Eject before Disconnecting"
    -Manually put the iPod into Disk Mode (said to be helpful in troubleshooting):  "Do Not Disconnect" on white screen with flashing icon (circle with diagonal line)
    -Ejected and disconnected the iPod.
    -Reconnected the iPod:  same message

    You need to either the let the iPod finishing syncing with iTunes, or figure out what application is still using it in the back ground that prevents you from being able to properly eject the device.  Just unplugging it from the computer is almost always going to cause issues when it's still in use by iTunes or another application.
    So let's connect the device to iTunes one more time and let it finish restoring.  Then try syncing a bit of content over to it and wait for it to finish the sync process.  Then try to properly eject it from iTunes this time.
    B-rock

  • White screen with flashing file icon with question mark mean

    What does this mean.   We are getting a white screen with flashing file icon with question mark inside the file. 

    It almost certainly means it can't find a bootable volume (one with OS X on it).
    Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
    Read this to diagnose it before resorting to reinstalling the OS:
    http://support.apple.com/kb/TS1440
    Excerpt:
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

  • Got a white screen with flashing file icon

    Why do I have a white screen with flashing file icon with question mark inside?

    It means your iMac cannot located a valid system to boot.
    Insert the CD that came with the iMac and allow it to boot. Once it gets the point where it's offering to install the OS, go to the top menu and choose diskutility. Perform a repair on the main drive "Macintosh HD".

  • How can i fix white display only shows apple logo ond loading symbol

    How can i fix white display only shows apple logo ond loading symbol! Pls help me guys!

    shutdown your mac by holding power button. Then Hold CMD+V and press power button now it will start to show some text wait for few minutes and somewhere it will stop post that screenshot

  • White screen with flashing question mark

    AAll I get is white screen with flashing question mark.  I've inserted OS disc but it won't run.  Can anyone help plz?

    A flashing question mark or globe appears when you start your Mac

  • HT1688 how do you repair white screen of death

    how do you repair white screen of death for iphone 3gs

    I have no idea what that is.  Can you elaborate?  Also, can you please let us know the troubleshooting steps you've taken (such as the ones recommended in the user guide) so that we don't waste our time giving you solutions that you've already tried?

  • Imac G5 won't start white screen and flashing question mark

    tried every key combo recomended -   erased HD using target mode/firewire with laptop - but won't boot up from install disc...

    The white screen with flashing question mark means that it cannot find a bootable volume.
    The iMac G5 will not boot from just any install disk. Ideally, use the grey restore disks which came with the computer. If you've lost these, you can order them direct from Apple. Alternatively, a Mac OS X 10.5 retail install DVD will work provided the iMac G5 has also 1GB RAM (minimum requirement for 10.5).
    Sometimes, if the internal drive is faulty, it can take a long time for the computer to recognise other disks. I would suggest holding down the option key on the keyboard (labled alt on some keyboards) and turning the computer on, keep holding alt until you get to the early boot menu, insert your DVD/CD, and click the circle arrow to refresh, wait a bit and the DVD/CD will show up and you can click on it to select it and boot from it by pressing the straight arrow.
    After a little while it will get to the install menu, select your language, then on the next screen go through the menus to find "Disk Utility" (it's in different places on different versions of Mac OS X).
    You will want to check that the internal hard drive is detected, and that it doesn't have a SMART error (it might be red, or say that the disk is failing). If you get that far, then (assuming you have erased the disk previously, as this will step really will erase the drive and take all your data with it) partition the drive, making sure that under 'Options' you select Apple Partition Map (this will be the default on earlier versions of Mac OS X, but might not be if you've erase the disk from an intel Mac like a MacBook).
    Once, you done all that, and there haven't been any issues, you should be able to quit Disk Utility, and carry on with the sytem install as usual, and a 30mins to 2 hours and reboot later you should be booting from the internal drive again.

  • How do you download or upgrade adobe flash player on a macbook?

    I keep getting small pop up windows appearing on my computer screen when I am looking at something that has photos or videos on the page.  how do you download or upgrade adobe flash player on a macbook without causing any problems to your computer?

    go here
    http://get.adobe.com/flashplayer/

Maybe you are looking for