How do I fix Your hard disk does not have enough free space?

How do I fix Your hard disk does not have enough free space?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

Similar Messages

  • Software Update reports...Your hard disk does not have enough space

    << Your hard disk does not have enough space-3 B is required to download and install the checked updates. Extra space is required for the optimization process. To free up space, remove files from your startup disk, then try again.>>
    I've got 127GB free??!!

    I ran the Disk Utility and it said that "The volume Macintosh HD appears to be OK." I tried to proceed with my software update and it still says I dont have enough space. I have 159.7GB availible and the error message says I only need 3.75GB of space. What do I do now?! Thanks in advance for your help!

  • Your hard disk does not have enough space.

    On running software update I am presented with this error message. Get info on the HD however says that I have 611.3 MB free.
    Any thoughts?
    OS X 10.6.2 on a 2GHz iMac

    Hi,
    I have 611.3 MB free.
    If you only have 611.3 MB free disk space that is NOT good. I wonder if you meant to type GB?
    If not..
    Go here for help to Free Up Space on Your Startup Disk
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
    Carolyn

  • "Disc inserted does not have enough free space"

    I am ready to burn my slideshow on a DVD. The info window in the project indicates that I am well within the parameters to fit on a DVD (4.7 GB). All the gauges are green. However, when I go to burn the disk I get the error message: "Disc inserted does not have enough free space". Looking at the info palette from the Finder window regarding the disk image, I find that it requires 5.8 GB, which, of course, won't fit. How come the iDVD project says I am good to go when I am not?
    I have OSX 10.4.11 and work on a G5. I have 53 GB available.

    Perhaps you may wish to use Dual Layer DVD-R Media (Verbatim / Maxell) in the event your mac supports this newer media. If not, you can add an ext. FW Burner preconfigured from Lacie or do what I did and build your own:
    http://discussions.apple.com/thread.jspa?messageID=5826029&#5826029
    and here's how I select Dual layer via the ext. FW Burner as opposed to the stock S-drive:
    http://discussions.apple.com/thread.jspa?messageID=5566746&#5566746
    The only other option that comes to mind for SL as well as DL medias is burning said image with Roxio Toast (fit to disc option).
    Message was edited by: SDMacuser

  • The disc inserted does not have enough free space

    I created a disk image about 451 MB, it an Audio Disk. When I try to write the image to a blank Memorex CD-R 700 MB I get the message: "The disc inserted does not have enough free space".
    When I created the image I used the disk utility and followed the help file instructions. When I open File> New> I can only select "disk image from folder", the other option is grayed out.

    wow, this is my first real disappointment with my MacBook. I can't burn images, technical support didn't get me any further than I already was. I spent half a day trying everything in the world to burn an image with no success.(followed all the help instructions) Now I have to go into the Apple store to have them go through all the same stuff I went through today. Two days of working on this computer to burn a CD with no success.
    My guess is that at the end of the day tomorrow I will walk away from the store with no computer because of a malfunction. What a wasted weekend.

  • Inserted DVD+R DL Does not have enough free space

    I am trying to burn a Disk Image that is 6.9 GB to a DVD+R DL 8.5 GB using Disk Utility but I keep getting the error message that there is not enough free space. I have inserted a few different blank discs and I keep getting this error message. Using 10.5.6 Superdrive with iMac. All I can think of is the Disk Utility is not recognizing the DVD as a DL, or possibly I need to convert the Disk Image to something I don't know about or use iDVD. Please advise. Thanks.

    hotwingz, Welcome to the discussion area!
    How much free space do you have on your hard drive? To burn a 8.5 GB disc you would need at least 8.5 GB free on the hard drive. Usually you need twice that (17 GB).

  • Hard Drive does not have enough space/error message

    Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
    I only have a 1 GB machine. What am I doing wrong?
    When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
    The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
    In addition, it turns itself off often, for no apparent reason. Any ideas?
    Thanks!
    J.Renee

    The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
    To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
    You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
    If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Hello, Trying to run Bootcamp on my 15" Macbook Pro (Maverick).60 gig available on my computer's hard drive and 250 gig on a separate hard drive that I have attached which is single partitioned. Keeps saying "The startup disk does not have enough space"

    Hello,
    I'm trying to run Bootcamp on my 15" Macbook Pro (Maverick). I have 60 gig available on my computer's hard drive and have 250 gig on a separate hard drive that I have attached, which is single partitioned (MS-DOS FAT). It keeps saying "The startup disk does not have enough space, you must have 28 gig of free space available" Does anyone know what I'm doing wrong? Any help would be much appreciated.

    Thanks for the advice Bob The Fisherman. I'm just reading what turbostar has kindly written and it appears that perhaps, if I take advice from you both, I need to free more space up on the computer's hard drive?
    With the external hard drive; would it be advisable to defragment? Know of any defrag freeware for Mac OSX?
    Many thanks to you both.

  • HT3275 Time Machine says my external hard drive does not have enough

    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.  I recently added memory, which may confuse Time Machine into thinking it is a new computer.  How can I erase old backups and complete this one?

    Walter Goodman wrote:
    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.
    See #C4 in Time Machine - Troubleshooting. 
    If that doesn't clear it up, how much data is on your Mac?  If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
    It sounds like your backups may be corrupted.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    I recently added memory, which may confuse Time Machine into thinking it is a new computer.
    If that's all you did, no.  
    How can I erase old backups and complete this one?
    Just erase the drive per #1 or #2 of Using Disk Utility.

  • "Start-up disk does not have enough space to be partitioned"??

    Hi there, I hope someone can help.
    I've been using bootcamp for a couple of years but recently it has started to play up so I decided to reinstall a fresh. I went into OSX and ran "boot camp assistant" and deleted the partition and start again. For some reason when I try to go though "bootcamp assistant" to set up windows xp again I get an error saying "Start-up disk does not have enough space to be partitioned - You must have 10g of space available" But I check my space available I have 23.5gb free. It's driving me nuts! :/
    Cheers, Mark

    It's possible that your drive is sufficiently fragmented that Boot Camp Assistant cannot allocate enough contiguous space to set up the partition. It's also possible that it's simple a directory issue. I would start with repairing the hard drive:
    Repair the Hard Drive
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    After restarting per the above try using Boot Camp Assistant to allocate a partition. If it still complains then you will need to defragment the drive. You can do that as follows:
    A. Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive.
    Source means the internal startup drive.
    B. Boot from the clone.
    Restart the computer. After the chime press and hold down the OPTION key until the boot manager screen appears. Select the icon for the external drive and click on the large downward pointing arrow button.
    C. Use Disk Utility to erase the internal hard drive.
    D. Restore the clone to the internal hard drive.
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the internal drive.
    Source means the external drive.
    *Note that the Destination and Source drives are reversed when you restore the clone from when you made the clone.*

  • I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

    Here's the story...
    I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
    I decided to reinstall windows.
    I deleted the windows partition using BootCamp.
    Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned  You must have at least 10 GB of free space available"
    After reading several posts on this forum I decided to defrag the hard drive and try again. 
    The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
    Any suggestions?
    Also, I tried repair disk and repair permissions
    Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)"  Could the 32-bit requirement be an issue? Is lion 64-bit?

    Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

  • My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

    My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive.  The hard drive has been in service for almost two years performing this function with no sign of failure.  How do I adjust time machine perameters?

    The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
    If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

  • "The startup disk does not have enough space to be partitioned?" WHY!??

    I"m trying to intall windows 7 on my Macbook air  OS X 10.6. When i enter bootCam i get this error "The startup disk does not have enough space to be partitioned" . It says I need 10GBs of free space, even though I have 500GBs of free space on my drive external hardriver.
    I did my research, and a lot of people are saying to use idefrag and defrag the hardrive, which i did. I also verifed disk permissions and repaired disk permission and all the other stuff.
    What should i do? Apple hass the shittiest service. I spend $1100 bucks for something and i don't even get support without paying? to me, that's BS. so if anyone could help i would greatly appreciate it.

    Thanks Bob.
    And now to close this thrilling episode we will sing the "Dragnet Theme Song". All together now.....
    “Dum De Dum Dum…”
    “Dum De Dum Dum Dum”

  • When I try to download an iTunes software update I get an error message that my start up disk does not have enough room.  What do I do?

    When I try to download an iTunes software update i get an error message that my start up disk does not have enough room.  What do I do?

    You probably have run out of space, I would delete (or move to an external drive) things that aren't being used as much.

Maybe you are looking for

  • Performance point services error

    We are trying to configure performance point services in our environment. We have successfully setup the secure store service and after that performance point service but still if we browse the site and start the dashboard designer, we are getting be

  • Best practices for subcriptions of many servers

    Thinking of monitoring free space on my servers. Servers are 2003,2008,2012 (plus R2). Basing on http://fehse.ca/2013/07/disk-space-monitoringcommon-practices/ - need to make three monitors for each version of server. So, the best practice is to crea

  • Issues while printing!!

    Hi all.. I have a daily job which generates output to a spool and thereby to a printer. Got an issue from the user that the printouts are not proper.. ie., the first page prints properly in a landscape fashion and rest of the pages are in portrait ma

  • Final Cut Problem - Duplicate frames when using add composite

    I have a problem with Final cut hopefully someone will be able to help. Clip A & Clip B on one layer and Clip C on another, being used as a transition between the two. Composite mode 'Add' being used on Clip C When Clip C overlaps both clips in the t

  • I upgraded bios on my presario c302nr from f.14 to f.24 now it wont boot

    System blue screens in a loop.  I need to revert back to f.14?  How can this be done?