How do I follow the troubleshooting instructions for PSE10 installation?

Q. The installation for PSE10 says to make sure the downloaded files are in one folder. After I downloaded the 2 parts, 7z listed 2 folders and a lot of other files. Do I copy the files in the folders and outside into 1 new folder?

do NOT extract the 7z file manually.
copy the 7z and exe to a directory and then click (or double click) the exe.

Similar Messages

I follow the exact instructions for installing the latest version and yet when I open it up I am still told that I do not have the latest version. I have done this 10 times.

I down load the latest version drag it into applications and then to the dock saying replace the older version and when I open Firefox the next time it says I have the older version.
I have dragged the older version into my trash but it keeps coming back. please advise.

Do you see that message on the www.google.com/firefox site?
The www.google.com/firefox site was used in Firefox 3 versions for the home page. 
Current Firefox 4+ versions no longer use that Google website as the home page, but use the build-in about:home page as the home page. 
Google no longer seems to maintain that page and assumes that you use an older Firefox version if you still visit that site and warns you that you use an older Firefox version and suggests to update. 
You can ignore that message if you run the latest Firefox version as reported in the "Help > About" window (Firefox is up to date). 
You can use another page as the home page like about:home or www.google.com or www.google.com/ig (iGoogle).

I've just upgrade my ios 5.1 to ios 6 but my ipod is now hanging up and i cannot turn it off even i follow the troubleshooting procedures. What should I do? I don't know what is the problem.

I have problem with my Ipod touch when I upgrade it with ios 6. I cannot turn it off. I have alrealy followed the troubleshooting instructions to press both the off/sleep button and the home button but still it will not turn off. I cannot use my ipod anymore for it is just hanging up.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I keep having blocked plug ins even following the prescribed instructions

I keep having blocked plug ins even when trying to follow the prescribed instructions for Adobe Flash Player. Please assist?

Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to resolve the permissons issues listed under the DW063 errors.

HT1386 My hard drive died and I need to resync my iPad. Will just following the initial instructions resync my iPad and restore all my information or do I need to try to recover the iPad file from the dead hard drive?

My hard drive died and I need to resync my Ipad. Will following the initial instructions for syncing work or do I need to restore my original files from the dead hard drive.

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

My ipad is unresponsive. The screen is black and I have followed the instructions to turn the iPad on. I charged it for about 20 minutes and tried again, following the same instructions and there was still no response. How do I get my ipad to turn on?

My ipad is unresponsive. The screen is black and I have followed the instructions to turn the iPad on. I charged it for about 20 minutes and tried again, following the same instructions and there was still no response. How do I get my ipad to turn on?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

How can I sort photos within an event? When I follow the Help instructions, I can sort manually in Photo format, but when I return to Event format, the original order is restored.

How can I sort photos within an event? When I follow the Help instructions, I can sort manually in Photo format, but when I return to Event format, the original order is restored.

Events are organisation for those who can't really be bothered. They are automatic - based entirely on Date and Time the camera records the photos as taken.
You can move photos between Events, you can Merge Events, you can Rename them and sort them in various ways except one: You cannot manually sort in an Event as Events are all automated.
If you want to manually sort in an Event then you've outgrown Events as an organising tool. Now it's time to look at albums (Where you can manually sort) which are much more flexible than Events as an organising tool.

I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

Try booting into Internet Recovery mode (booting whilst holding down the command, option and R keys). It will take a while to load as you're booting from Apple's servers across the Internet.
Once there, use Disk Utility to erase the "Macintosh HD" partition. After the drive is formatted try reinstalling the OS.
Good luck,
Clinton

HT1926 I followed the troubleshoot for iTunes setup.exe is not a valid win32 app; even uninstalled QTime; reinstalled QT; then tried itunes ; no success any ideas? Windows IE8 version on PC

I followed the troubleshoot for iTunes and get message the iTunes setup.exe is not a valid Win32 application. I remove QuickTime and reinstalled QT, then tried iTunes install with no success. Any ideas?

Perhaps try downloading and saving a copy of the installer to a different (32-bit) PC. Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

How Do I cancel an App Store in-app purchase subscription? I have followed the standard instructions.

I want to cancel a subscription. I follow the standard instructions to go to App Store --> Featured-->Scroll to Bottom-->Tap my Apple ID or sign-in.
The problem is my Apple ID is shown, but it is greyed out. So, when I tap it nothing happens.
I am on an I-Pad. I appreciate any and all help.

Do you currently have Settings > General > Restrictions > Accounts (under the 'allow changes' heading) set to 'Don't Allow Changes' - if you do then change it to 'Allow Changes' and your id at the bottom of the Featured tab in the App Store should no longer be greyed out

HT5654 How do I download the latest update for iTunes?

I updated my software on my phone but I can't get the update for my iTunes, how do I download it?

Read the article from which the question was posted and follow the explicit instructions.

How do I get the "Themes" (Designs) for arranging my photos to email them for my iPhoto?

How to get "Themes" (Designs) for arranging my photos to email them in my iPhoto?
Thank you

Hello bendercm, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How do I enable the "forward" command for my email?

When I am at my inbox and reviewing received emails, I am unable to forward any to any other email addresses. The "forward" command is "greyed out", indicating it is not activated/enabled. Not sure how to correct that.

Hello bendercm, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How do I follow the troubleshooting instructions for PSE10 installation?

Similar Messages

Maybe you are looking for