How do I follow up on my case?
I need to follow up on my case with an advisor but there is no option to. I know it's after hours right now, but where can I find the option to do so?
In the lower right hand corner of every page in this forum is a
link labelled 'Contact Us'. I suggest you might wish to start there.
Similar Messages
-
How do I follow up on an Adobe transaction?
Hi. I paid for InDesign on the Adobe website yesterday after the month free trial. The money went out of my account this morning. To date, I have received no mail from Adobe.I don't want to have the program delivered, obviously I just want the certification code. But now that I've checked on my profile at Adobe, there is no record of a purchase!!! How do I follow up?
This is a user forum and not a direct channel into either Adobe Customer Support or Adobe Technical Support.
Please call Adobe Customer Support directly. They are the only organization that can assist you. Make sure you have all relevant information about your transaction when you call.
Good luck.
- Dov -
I requested a transcript of my chat with a CSR this evening...She was great, patient and helpful - but has yet to forward the transcript!! How do I follow up and get the transcript.
In the conversation, I requested that we lower our $122/mo bill, since we have 1 smartphone (with 2Gig) and 1 dumb phone with no data and only 1000 minutes of talk and 1000 shared text messages. I stated that my Hubby has unlimited everything for $25/Mo. She offered 250 Meg and same minutes/text for $65. I did not say anything - but I was insulted at the excessive cost of a dumb phone (with 7 months left in contract) and almost no data for an old smart phone (not in contract). Does ANYONE else charge that much?Hello there acraftlady..... congrats on your personal plan. Even though you are paying double what I am paying for the same service, I suspect that you are still happy and can afford the cost. That is a great savings over Vzn - but no where near the best that you can do! If you have a contract for your services....PLEASE read no further.
If you copy and paste http://www.discountfanatics.com/cheapest-cell-phone-plans.html into your web page, you will find MY service provider (rated #1, by the way) along with 5 or 6 others.
Please note, if you DO not have access to wi-fi, then these plans are a bit less desirable - but still about half of what you are currently paying.
I used to have about 80% coverage with Vzn in my home...I now have 100% with my new provider.
I used to NOT have data with Vzn cause it was too expensive...I now have unlimited data - EVERYWHERE I travel.
To compliment my provider, I have yet to pay the full $25 per month - because I get a $20 credit everytime a person whom I referred to my provider signs up...BOTH get a $20 dollar credit. In otherwords, I have been paying (for 3 months now), $5 per month for unlimited everything on my MotoG (#1 or 2 rated smart phone).
Just wanted to share that you have done great!! and you can do better!!
Your son and hubby can do $10 per month each for unlimited everything (data via wi-fi only).
Congrats on your progress - and looking forward to you doing even better!
Jim -
Sequences - Test Organzer: How to move more than 1 test case at a time
Hello,
I would like to be able to move multiple test cases within a sequence but I do not know how. If I highlight multiple rows and select Move Test Case only 1 of the rows will move. This is fine if your test package only has a few transactions but if you have many it becomes very time consuming.
Does anyone know how to move more than one test case at a time within a sequence?
Regards,
Corinne TaylorHi Corinne,
Actually I do not have any solution for that either. I am also only able to move the test cases one by one, which indeed can become very time consuming. There I have a small question to you: when I am in the web-based application to change the sequence of the test cases, everything goes really slow. Selecting the test package in the browser, going to change mode, selecting the test cases, creating a test sequence...it all takes time before I can continue. Is it the same with you? Else I will need to look at what is going wrong on our side.
Thanks and best regards,
Kristof -
How to handle the control records in case of file to idoc scenario.
Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri -
How to use a CTE in a CASE statement?
Hi everyone,
I'm trying to use a CTE in a CASE statement and getting error. In fact, I'm not sure how to use a CTE in this case and this is the first time I'm using a CTE. I managed to build a CTE successfully but, failed to incorporate it in the CASE statement.
SELECT wbs,
MIN(srt),
MAX(srt)
CASE ust
WHEN
WITH CTE AS
SELECT p_id + p_name + ps_name AS colg, p_id
FROM pd_info
WHERE s_desc = 'warehouse'
OR p_desc = 'Originated from warehouse'
OR p_desc = 'Originated from a partner store'
SELECT colg FROM CTE
WHERE cte.colg IN (SELECT p_id + p_name + ps_name AS c
omb from pd_info)
OR cte.p_id = 'xxxxxxxx' THEN 'invalid'
ELSE 'valid'
END,
p_name,
sub_name,
ps_name,
FROM pd_info;
Could experts here please help me?
Thank you,
Bangaaram
Known is a DROP, Unknown is an OCEAN.With the help from some experts, I've figured out that CTE doesn't work in this case. Here are the queries that I'm using for the above. Either of them is working good so far.
SELECT Wbs
, MIN ( Srt )
, MAX ( Srt )
, CASE
WHEN S_Desc = 'warehouse'
OR P_Desc = 'Originated from warehouse'
OR P_Desc = 'Originated from a partner store'
OR P_Id = 'xxxxxxxx'
THEN 'invalid'
ELSE 'valid'
END AS Ust
, P_Name
, Sub_Name
, Ps_Name
FROM Pd_Info
GROUP BY Wbs
, CASE
WHEN S_Desc = 'warehouse'
OR P_Desc = 'Originated from warehouse'
OR P_Desc = 'Originated from a partner store'
OR P_Id = 'xxxxxxxx'
THEN 'invalid'
ELSE 'valid'
END
, P_Name
, Sub_Name
, Ps_Name;
SELECT wbs,
MIN(srt),
MAX(srt)
CASE
WHEN cte.p_id = 'xxxxxxxx'
or exists
(select *
from pd_info p2
WHERE (s_desc = 'warehouse'
OR p_desc = 'Originated from warehouse'
OR p_desc = 'Originated from a partner store' )
and p2.p_id = p1.p_id and p2.p_name = p1.p_name and p2.ps_name = p1.ps_name
THEN 'invalid'
ELSE 'valid'
END ust,
p_name,
sub_name,
ps_name,
FROM pd_info p1;
Thank you,
Bangaaram
Known is a DROP, Unknown is an OCEAN. -
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA
HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBAThanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
L_STATUS TYPE SWR_WISTAT-STATUS,
L_NEW_STATUS TYPE SWR_WISTAT,
L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
RECEIVING
RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
EXPORTING
WORKITEM_ID = LCL_L_WID
STATUS = L_STATUS
USER = SY-UNAME
LANGUAGE = SY-LANGU
DO_COMMIT = 'X'
IMPORTING
NEW_STATUS = L_NEW_STATUS
RETURN_CODE = SY-SUBRC
TABLES
MESSAGE_LINES = L_SWR_MESSAG
MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa -
How to set up an automatic upper case at the begining of a sentence
Can someone help me if or how to set up an automatic upper case at the beggining of each sentence. I am doing huge amount of writing and just got fed up with it.
What application? Pages? If so, that option (and many others) is not available in the current version. You can use the previous version which should be in your application folder. Or you can do what I finally did and use Open Office or Libre Office.
-
How can the following error incurred when trying to access the Itunes Store be corrected: an unknown error occurred There was an error in the store. Please try later 0x80092013
Try here > http://support.apple.com/kb/TS3221
And/or... see the More Like This section on the right. -
How to convert following ABAP routine into Java
Hi Experts
I m new to IPC
How to convert following ABAP routine int java
READ TABLE XKOMV INTO XKOMV_AUX WITH KEY
KSCHL = 'ZCU2'
KPOSN = komp-kposn.
IF SY-SUBRC EQ 0.
MOVE XKOMV_AUX-KWERT TO XKWERT.
MOVE XKOMV_AUX-KBETR TO XKOMV-KBETR.
w_kwert = xkomv_aux-kwert * -1.
DO any one has documentation on convertion of abap routines into java
Thanks & Regards
SowmyaHi sowmya,
download this document through this u can solveur problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/107adc1a-0501-0010-de8e-973e0fb4049b
Reward if helps
Regards
Manohar -
How to convert a string from upper case to lower case in FOX formula
Hi Experts,
How to convert a string from upper case to lower case in FOX formula?
Thanks,
Cheers!!!
PANKAJThe last result.append( c ) should be:
result.append( Character.toLowerCase(c) ); -
How to convert a string from lower case to upper case withour using transla
Hi all,
how to convert a string from lower case to upper case withour using translate,
Thanks in Advance,
ReddyRefer to this related thread
Re: hi guys this very urgent please help -
How I can fix my iPad smart case ?
How I can fix my iPad smart case ?
If you close your smart case it's have to get log off but mine it doesn't work it's mean when I close mine it doesn't get off automatically !
-
GRC CUP - How to change SNC Name to lower case during user creation.
Hi All,
We are using GRC 5.3. CUP automatically creates user in R3 but SNC p:username'@'DOMAIN.COM is in upper case.
1. During automated user creation.
2. How change default DOMAIN.COM to lower case "domain.com"
Currently we have to manually change is via SU01 after user has been created.
Thank you
Regards,
JackySorry please ignore this thread. I got the wrong details. Post cancelled
-
How to pick document id for perticular case id from RMS
Hi,
Can anybody answer if you know "how to pick document id for perticular case id
from RMS".
please do the needful.
Thanks and REgards
-SujathaAlireza,
This is a really, really, really, really, really (really) really bad idea.
Using the max(id) + 1 trick:
1). WILL get you duplicates (think what happens when two people do this at roughly the same time.
2). Is horrible for scalability in general
3). If you use table locking to get around issue #1 is truly atrociously horrible for scalability.
[url http://forums.oracle.com/forums/thread.jspa?messageID=1901057]here is a previous discussion on this topic.
[url http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3379873654938]here is an AskTom article on this topic (note the title of that post is "Locking Problems" - should give you a hint as to whether this is a great idea or not).
Sorry for refusing to answer your question directly, but the best answer is here:
I do not want to use insert triggers or
sequence generators or stored procedures, yes, you do So i have to read the max id
and increment it by one from inside the application. no you don't
This is a really bad idea.
Best,
john
Maybe you are looking for
-
Here goes. My iPod touch has all my songs on it. I have changed computers several times and iTunes has a library of similar but not as many songs as iPod. When I plug iPod in ans go to sync it says that iTunes library will replace iPod songs. I don't
-
Unable to open any books in iBooks after 7 download
Unable to open any books from iBooks app after downloading new 7
-
How do I get a full screen canvas back
I'm a 20 year user -- today I lost 90 percent of my canvas - an inaccurate way of saying the screen on which the canvas sits is 1.5" wide and 22 " tall. The little thingy that one clicks on and holding down the mouse to drag it to full screen is not
-
Will adding keywords or other metadata changes to jpeg cause file to be compressed?
Hi, I've been searching on this for hours and not finding a definitive answer. Will adding/modifying keywords or metadata (ok if this is two seperate questions) cause a jpeg file to be compressed again while the changes are saved to disk? thanks for
-
Dear Extperts, Though there are many issues with respect to Plan updation of FAGLFLTXT, but i didn't find a correct solution: I switched on the "Integrated Planning" under Controlling Area settings Switched ON Online Transfer and Line items under Pro