How do I force a rerender in Premiere Pro cs6

I have a clip in my project in Premiere CS6.. I renderd my whole work space and all was ok but one clip. The clip got a bad render and I can't figure out how to force it to rerender it...
want Im at now
the render area is green. I changed some setting on the clip.. the preview runs fine but when I change it back to the way I want it. it see's that it has a render job already and loads that one up and even if I rerender whole workspace it will only rerenders for like 3 sec's not like the 4 mins it should do.. I searched several; furms and I can't find anyone that say's how to force it to rerender it after a bad render job it did.. basically the clip looks like a broken lcd screen flickering green and black. play s part of the pre clip on bottem and the clip it should play on the top left.. s part of the pre clip on bottem and the clip it should play on the top left..
like I said the clip played fine on preview out put screen but after I rendered my whole work space it got corruped. I change anything on the clip that cuases it not to play prerender data it works fine. just when the render bar is green its all mested up.

It didn't fix it but thanks.. What I end up doing is deleting the clip and converting the file format to something diffrent and re importing it... Each time I deleted and re-rendered it would become corrupted... weird for some reason it, didn't like the format the file was in,,, I got it fixed, thanks for your help

Similar Messages

How Can I transfer settings on Adobe Premiere Pro CS6 to CC 2015

I had Adobe Premiere Pro CS6 with magic bullets and alot of presets, saved presets etc. but my windows crashed and i had to reinstall it all over. I have a backup of my complete drive before windows crashed
When i went to install Adobe Premere Pro CS6 again on new windows 7.. I saw CS6 is no longer. Its just CC 2014. So how can i transfer all my presets, settings from Adobe Premiee CS6 to CC 2014? which folder should i overwrite transfe

By presets i mean on effects tab

How to Import Chapter Names Created in Premiere Pro CS6 to Encore CS6?

I edited a sequence in Prmiere Pro CS6 and then I created and named all my Encore Chapter Markers while still in Ppro. I then opened Encore CS6 and used the Adobe Dynamic Link to import my Premiere Pro CS6 sequence into Encore CS6 and created a new timeline from that sequence. I imported a Menu (which I created in Photoshop) and linked the first chapter to button 1 in my menu and then used Create Chapter Index to bhild all the menus. How do I get the Chapter names to automatically appear in these menus without having to retype each one?

Select a button and look at properties. Check the option "Set Name From Link." You can select multiple buttons and do them at one go.

How to edit iPhone 5 video in Premiere Pro CS6?

I am new to Premiere Pro CS6 (new to video actually), and iPhones as well, and was wondering if there is a detailed procedure on editing iPhone 5 video in Premiere Pro CS6. Do I just attach the phone to the computer like any movie camera?

>new to Premiere Pro
A good place to start is the tutorial list in message #3 http://forums.adobe.com/message/2276578

How to prepare for OS clean install - Premiere Pro CS6

Hi!
I am running Windows 7 which is starting to show off signs of trouble. I am closing in the point of fresh OS install needed. I have recently bought an upgrade version of Premiere Pro CS5.5 -> CS6 (individual app). Now, if I start from fresh grounds, I do not have the CS5.5 installed in the system. What is the easiest way to get Premiere Pro CS6 up and running in the new system?
Kristian E.

Install the CS6 upgrade, enter your CS6 upgrade serial number then enter your CS5.5 serial number when prompted.

How do I crop a frame in Premiere Pro CS6?

In FCP, you can crop a frame by going to wireframe and simply adjusting it to crop the image area you want to show. I want to maintain 16:9 but simple make the clip 'zoomed in' to an area that I want. It won't be too drastic of a crop. Does Premiere Pro have the ability to do this?
TIA,
Ken

I see that, like the beginner that I am, I used the wrong terminology. Crop does indeed crop, but, working in print media for most of my life, what I was looking for was to seclect a portion of the view and 'enlarge it' to fill the frame with some selective positioning of the area to be used. It might be more correctly called 'zooming in' on an area of the original frame, and also filling the frame with that selected area. I hope that this helps give an idea of what I am after.
Another way of putting it might be like a car in the distance coming at the camera and then getting close to the camera. With that scene, what I would want to do is start by filling the frame with the car in the distance and keyframe a 'zoom out' effect that would keep the car filling the screen and eventually wind up with the car close to the camera. So the car would be big, filling the frame, all the while it was coming toward the camera. I belive this would be called starting with a full zoom and then 'zooming out' until the car was at the point near the camera.
PS: after trying everything again, I see that 'Scale' is indeed the answer to what I wanted. Keeping things centered on the screen is a trick and I've added many keyframes, almost at every frame in one instance, to keep the subject centered on screen. Also, I see that 600% is the maximum scale I can use to start with, so some responsibility must lie in the hands of the videographer and the zoom lens on the camera.
Any comments you have to possible help as I flounder with my beginning efforts would be appreciated. I believe control will come if I put the time in now.

How do you change sequence settings in Premiere Pro CS6, and earlier?

Is it possible to change a sequences settings once you've set up the sequence?
In Sequence Settings everything is grayed out so I can't change it.

What type of camera did you record your AVCHD footage on? The reason I ask is because I'm thinking the most likely reason it thought your video was interlaced is because several AVCHD camera's shoot footage that they call "1080p" but it's not actually normal progressive footage. It's actually PsF footage. (Progressive segmented frame) Which with this footage it just records both fields, so what ends up happening is that Premiere ends up reading the footage like it's interlaced which it basically is, except unlike normal interlaced footage this PsF has both fields. Anyways though you can find out if this is the case by using the modify>interpet option from inside your bin, then if it says that you files field order is anything besides progressive then you'll know you will need to conform the footage to progressive as explained in this article in order to make Premiere work with it properly. Although this issue might not be the same thing you're experincing I just figured I'd mention that since it's fairly common place for AVCHD cameras to record PsF.
You may want to check out this article although it may not apply to you depending on what type of camera you're using. Although they cover basically all the major AVCHD camera makers
http://provideocoalition.com/index.php/atepper/story/psf8217s_missing_workflow_em_part_1_b enign_psf_versus_malignant_psf/
http://provideocoalition.com/index.php/atepper/story/psf8217s_missing_workflow_part_7_adob e_premiere_pro_cs5.5.x/
http://provideocoalition.com/index.php/atepper/story/psf8217s_missing_workflow_part_6_tepp er_asks_the_camera_manufacturers8230/
They talk about several Cannon, Panasonic and Sony avchd cameras that all currently record footage this way.

How do I force a download of Premiere CS6?

I'm trying to download CS6 to get Encore. When I click on Download Premiere CS6 from the Premiere page, the CC "app list" launches from my top menu bar (Mac). The app list tells me that my CS6 is up-to-date. Problem is, I deleted the files weeks ago. Somehow CC is not up-to-date with the apps running on my machine, and seems to be blocking my attempts to re-download. Yes, I dragged the apps to the trash a few weeks ago, rather that doing an uninstall.
How can I force download Premiere CS6 to get Encore? Tried also quitting CC, but when I click on Download, the CC app launches again.
Thanks for any help!
Theo

Hi
Thanks for posting on Adobe forums.
Please try to download Premiere Pro CS6 from this link: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Regards,
Sandeep

How can I re touch the model in Premiere PRO CS6?

Hello !
I am using Premiere Pro CS6. We are shooting a documentary where i have the host who some pimples, moles etc.
So How can i retouch it and make perfect ?

Welcome to the forum.
One possible treatment, within PrPro would be to do a Track Matte Key, where a little bit of Blur is added. Once, there was a great tutorial on softening blemishes in skin tone, but it is no longer.
This article covers some of the high-points of the process. The success, and handwork, will depend on how much the host moves about: http://forums.adobe.com/message/4575874#4575874
Because so much can be Keyframed, and limited via Track Matte Keying, one is limited only by their imagination. I would first Duplicate the Clip, add a bit of Blur to that Duplicate, then limit that Blur to just the facial areas with a Track Matte.
Good luck,
Hunt
PS - Beyond that, there are some neat tools in After Effects, that go beyond.

How do I export a video on Premiere Pro exactly as it is in my sequence?

I've only used Premiere Pro CS6 for a week so I'm fairly new to it. I just completed editing my first video but when I tried exporting it, the video didn't show all the clips I used in my sequence and/or had extra clips that I did not use.
This screeshot says that this video is 2 minutes 15 seconds long. Ok good. That's how long I needed it to be.
BUT HERE. The file says its only 1 minute and 4 seconds long and once I scrolled through it, I saw that it didn't have all the clips I used and instead inserted itself clips I DIDN'T use. This is a fan video so I used a large file as a source and used the input-output to grab clips and edit and added music and transitions. That's it.

You need the Work Area Bar to cover what you want exported.
You can see in your screen grab of the sequence...that the yellow tabs are short of the ends.
Drag them out to cover is one way.
In and Out points is another.
Entire sequence option is another
The options are in the Export Window.

How do I get Premiere Pro CS6 off Creative Cloud?

I have spent over 100 hours in Premiere Pro CS6 putting together four hours of complicated video (at least for me, a first timer) all with the end objective of producing two DVDs which I’ll replicate for the 100+ members of my son’s high school marching band. So it came time to burn them to the DVD, make a menu, etc.
Which brought me to the apparently complicated and confusing task of trying to first FIND – and then use – Encore.
After reading many threads in multiple forums, it seemed what I needed to do was to download Premiere Pro CC, uninstall Premiere Pro CS6, leaving the box unchecked for Encore, and then use them together.
I installed Premiere Pro CC. Opened a project apparently fine.
Then realized that perhaps Encore was already available and accessible to me via CS6. So tried to open a project there…. and now none of my projects could open in CS6!!! I was getting the dreaded “Sequence not available” error message.
I tried uninstalling CC just to see if that would fix it (since installing it seemed to cause the problem). Didn’t solve it.
Then came upon an Adobe help page that seemed to imply if I uninstalled CS6, ran a cleaner utility, and then reinstalled it, it would likely fix it.
So I uninstalled it.
Then I went to Creative Cloud to download CS6... but I can’t find CS6 anywhere in Creative Cloud!!!! I got a "single-app" membershi to Creative Cloud in June of last year just for Premiere Pro. I never bought a DVD or anything so I THINK that's the only way I can re-install the program.
Forget the nightmare of trying to figure out how to get Encore - I just want Premiere Pro back at this point. What the heck is a person supposed to do?

John -
Thanks for your patience in explaining the page number stuff to a "newbie."
If I understood you correctly, was the ultimate URL you were suggesting I click on this one?
http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
If so..
a) I already watched that due to finding it in another thread where I think you were the guy that posted it (thank you!)
b) Those directions were in part why I uninstalled Premiere Pro CS6 in the first place
c) That video does not address my problem: I can't find CS6 loaded in Creative Cloud
However, your Indesign-related link DID address my problem. Thank you very much!!!

How to change the language to English in Premiere Pro CS6?

Hi there,
I recently bought the Master Suite over Amazon, because the Adobe Online Store seemed broken (Unknown Errors after ordering and a Telephone Number which you couldn't call) and I really needed it before the end of the year (Tax Reasons). So now I got the German Version. I want it to be in English because the Translations are sometimes really bad and also most of the Tutorials and Learning Materials are in English. No big deal I thought, you can surely change it to English. I did my Research and I could change Photoshop and AfterEffects to English. What is left of my most used Tools is Premiere Pro. So:
How can I change my Premiere Pro CS6 to english? There has do be a way?
Thanks a lot!
Edit: Also I can't request a language swap as recommend http://forums.adobe.com/message/4702895#4702895 because i couldn't order it via adobe store.

I know that the PrPro S/N's are platform-specific, i.e. Mac, OR PC, but I am not sure if they are also language-specific. Others WILL know. If they are NOT, then it should be possible to download the trial for English, and unlock that with your S/N. I have never done a trial, so have never converted to the full-paid with my S/N, but am just thinking there.
As for the Adobe Store, you are correct that they had issues (many related to Adobe cookies in one's browser), and I had to make a purchase, about the same time that you did, from another browser.
With your invoice and S/N, Adobe Customer Support (not Technical Support), should either be able to help you, or give you the definitive answer to your question. If you bought directly FROM Amazon, they are a certified reseller, so that should not be a problem. If you bought from someone else, just THROUGH Amazon, then there could be a problem.
Good luck,
Hunt

How do I find past projects in Premiere Pro?

Hey Everyone,
I was wanting to make an alteration to a project I finalized last month but since then it has gone off my 'recent project' list once I open premiere. I can't find it in my auto save folder on my PC also. I can only find the rendered files and some peak files. How do I find old projects in Premiere Pro? Thanks in advance, all of you guys are awesome.
Mike Diaz

When I create a new project I have PPro put "everything" in an Adobe folder on my temp file drive... E:\Adobe
INCLUDING the files that default to the C: drive - Drive C space http://forums.adobe.com/thread/1007934?tstart=0 see reply 4

How do I export a .wmv in premiere pro cc?

How do I export a .wmv in premiere pro cc?
In the format dialogue box I dont see a Windows Media option.
See attached picture.
Thanks
R

You wont get that option on a Mac.

How does Sony Vegas Pro 12 compare to Premiere Pro CS6?

About 2 months ago, I purchased Premiere Pro CS6 retail box version from Best Buy. With everything going to the CC, I can't get upgrades unless I join the CC. This is NOT something I want to do! I would like to know if the chroma keying and image stabilization in Sony Vegas pro 12 are just as good or similar to Premiere Pro? I already read about how to transfer the product license on the Adobe website. If I decide to make the switch, I will list my Premiere Pro on Ebay. Another reason why I may want to get Vegas Pro is because I found out about the AVCHD bug in Premiere AFTER I purchased it. It has been over a year and Adobe has still not fixed the bug. I have a feeling they will never fix the bug because of the new CC vesion. I am currently about half way through the classroom in a book from Adobe and have not yet edited any of my own videos. My video camera is a Canon Vixia HF S20 and my computer is a new Dell XPS 8500 with Core i7 and 12 GB of ram. Just a bit frustrated on what to do. If I can't sell my Premiere Pro for a good enough price, I will keep it and switch to Vegas or some other program after it becomes obsolete.

You can download a fully functional demo of Sony Vegas 12 Pro. That's what I did. So far I like it and will be making the switch to Sony Vegas 12 Pro.
They also have Suite version which include HitFilm 2 Ulimate. This program is like After Effects. I haven't started playing with that yet.
Also, there is Movie Studio 12 Platinum Visual Effects Suite 2. That's a mouth full. Anyhow, it is based on Sony Vegas 12 and it comes with HitFilm 2 Express. The Express version is a stripped down version of HitFilm 2 Ulimate. The Express version is still a great program for adding effects. For some people Movie Studio 12 is all they will need,
Both version, Vegas and Movie Studio, have GPU acceleration which is really nice.
I also just picked up Corel PaintShop Pro X5 Ultimate. It sells for $69.95 and it can open and save .PSD files. So I don't have to worry about all of the .PSD files I saved in Photoshop
Right now I have CS5 and CS6. Premiere CS6 has a lot of bug, the AVCHD spanning clips, slow motion that jitters, caching problem, slower exports, etc.
Dave

How do I force a rerender in Premiere Pro cs6

Similar Messages

Maybe you are looking for