How do I force Acrobat 11 Professional users to use the "save as" verses "save"?

How do I force Acrobat 11 Professional users to use the "save as" verses "save"?  I want the users to type in a fillable form, but not save their edits on the original form.  I want them to be able to save with a different file name.

You can't really force it, but you can encourage it... For example, you can set the file as read-only and add an instruction to do so before the file is saved using a script.

Similar Messages

  • How do you allow all normal users to use the IOSsimulator in Xcode without placing them in the _developer group?

    Ever since we've updated Xcode at my place of work normal users have been unable to run their applications in Xcodes iOS simulator because they're prompted with a "Developer Tools Access needs to take control of another process for debugging to continue. Type the name and password of a user in "Developer Tools" group to allow this". I work in an ever expanding office with over 200 employees so adding them all to the _developer group will just be far to time consuming. Is there a way to give normal users permissions to run the IOS simulator?
    Here is the message I would like for normal users to bypass.

    ....I don't see a way around it - either they're in a permissioned group with an applicable login or they're not, right?

  • How to prevent a portal user from using the BEx Analyzer ?

    Hi,
    we have different type of users : most users may use the portal as well
    as the analyzer ;
    we have one special user with extended authorizations : this user
    should use the portal , where he has a limited set of queries to run
    with hardcoded filters ==> this user should not be able to use the
    analyzer however, since he then would be able to call all other queries
    by using the find function ;
    how can we make sure this user cannot use the analyzer , using SAP
    authorizations ?
    best regards,
    Erwin Van Giel.

    Hi,
    if I remove the complete S_RFC authorization for the user then the BEx Analyzer cannot connect anymore to the BW system, but neither can the user run reports from the portal : it needs the S_RFC with 'SYST'.
    If I only remove the RRMX from the S_TCODE and from the S_RFC, it does not prevent the user from starting the BEx Analyzer and connecting to the BW system. It only stops the user if he would start the RRMX transaction from within an SAPGUI session.
    Perhaps there should be a value in the S_RFC that allows connections from the portal but not from the BEx Analyzer .... ?
    so not solved yet ....
    best regards,
    Erwin.

  • How many Licenses of Acrobat Professional do I need for Adobe LC PDF Generator

    Hi,
    At our customer site we have purchased 6 licenses of Adobe LiveCycle PDF Generator and have recieved a license file with the keys for Adobe LiveCycle PDF Generator and Adobe Acrobat Professional. We bought the license from a reseller of the product. We understand that the Adobe LiveCycle PDF Generator is a server based software and needs 1 license per CPU. Each of our server (Dev, Val & Prod) have 2 CPU's so we have sufficient licenses (6). We are under the impression that this would suffice. How ever we are not sure on how many licenses we need for Acrobat Professional.
    Here is a brief description of the way we would use Adobe LiveCycle PDF Generator. We are deploying a PLM system and one of the requirement is to render Word documents to PDF so we are using PDF Generator for this capability. On our Adobe servers we will install Microsoft Word, Acrobat Professional V9 Extended and the Adobe Livecycle PDF Generator. We will have around 150 users for the PLM system being deployed. The PLM system is a Web based system which means the PLM application server will be running on a Solaris server in our case. As part of the workflows in the PLM system, at the end of the workflow process, the PLM server would trigger a request to the Adobe server to convert the word document to PDF. The Adobe server processess the request and returns the PDF file that gets generated.
    Based on the above usage of the system how many licenses of Acrobat Professional do we need? We will be installing Acrobat only on the server where we install the Livecycle PDF Generator. We had a call with our purchasing person today and she cautioned us that for Adobe Acrobat Professional we might need 1 license per user of the PLM system. She has asked us to check this with the Vendor of the product. Somehow I don't think it makes sense to purchase so many Acrobat Professional licenses even though we install only once.
    So can someone tell me How does the licensing for Adobe Livecycle PDF Generator work? How many Acrobat Professional licenses we actually need? Is it based on the number of users in the system that is triggering the request? Appreciate your response on this.
    Regards,
    Ragha

    You really should talk to your Adobe Sales Rep about this.  There are all kinds of special deals, licenses and such for customers using LiveCycle.  (For instance the license for PDFG may include Acrobat licenses for certain uses).

  • How can I find out the screen size of the users moniter using the Acrobat SDK?

    How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
    Thanks,
    Gregory

    Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
    Gregory

  • How to download adobe acrobat Professional 10.0 setup

    Dear Sir or Madam,
           I Have Licence so how to download adobe acrobat Professional 10.0 setup.
    forumnotifier

    Hi Tech-ali,
    Please use the below direct link.
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
    Thanks

  • How to activate Adobe Acrobat Professional 7.0?

    Hi,
    I do have a valid serial number for Adobe Acrobat Professional 7.0. I am using a Tryout version of it. When I launch Adobe Acrobat Professional 7.0, it does not give me that option (to enter the serial number). Thanks for your help.
    Satish

    Adobe customer support had earlier told me to go to forums on adobe.com. The reason they gave me they do not support Adobe Acrobat Professional 7.0. The representative told me Forums on adobe.com do support Adobe Acrobat Professional 7.0. ???

  • How do I make a professional tenure portfolio using adobe X1 or other product?

    How do I make a professional tenure portfolio using Adobe XI or other product?

    No way with the free Reader. Perhaps with Acrobat, but you would probably need another program for the layout.

  • I had over 200 e-mails.  I went to my webmail and deleted most of them.  However, my iPhone still shows 200 e-mails.  How can I force my iPhone to update from the e-mail server?  Or will I have to delete each e-mail from my iPhone as well?  Thanks.

    I had over 200 e-mails.  I went to my webmail and deleted most of them.  However, my iPhone still shows 200 e-mails.  How can I force my iPhone to update from the e-mail server?  Or will I have to delete each e-mail from my iPhone as well?  Thanks.

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • How can I tell if a user has used IMAP?

    How can I tell if a user has used IMAP?
    <P>
    Check their mailbox for a file called "__VALIDITY__" If they have this
    file in their mailbox, they've used IMAP.

    You may want to refer to the Java Security forum at http://forum.java.sun.com/forum.jspa?forumID=545 for information on Kerberos & JAAS.
    There is a also a post in this forum, outlining how to utilise Kerberos, JAAS with JNDI to access Active Directory. JNDI, Active Directory and Authentication (Part 1) (Kerberos)
    at http://forum.java.sun.com/thread.jspa?threadID=579829&tstart=300
    Possibly the part you are looking for is the functionality included in the class that implements java.security.PrivilegedAction
    Good luck.

  • In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large

    In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large volume?
    We have 300 pdf reports and need to insert a 2 page cover page infront of each report. Not sure if Batch processing is best???
    Thanks for any tips.

    Probably each cover page is different too. I would probably just bite the bullet and do each individually. I would create the 2 cover pages in WORD or other word processor and print to cover.pdf. Then open a PDF and Pages>Insert Pages or the cover.pdf to the front of the open PDF and save as to the current PDF. Then repeat 299 times. Each time you would make the appropriate change to the DOC file and print a new cover.pdf file (you might want to turn off open in Acrobat for this processing in the printer properties to save time). Probably a good idea to keep a list of the files to check off what has been done (you can generate a list in DOS by Start>cmd, change the directory to your location [cd path], and do "dir >>list.txt". That will give you a list to use.). There may be an easier way, but by the time you get it figured out you might be done this way.

  • When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground?

    When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground? I have two signals and I want to show one overlayed on top of the other. Right now Diadem will only graph it the other way around. I have tried deleting the curves and re-adding them in differnt orders, changin the order they are in the curve list, changing their order inthe data portal, right clicking on the curve and selecting "move to forground" (this only moves the entire 2-d graph object to the foreground). Im using Diadem 12.0 Basic.
    Solved!
    Go to Solution.

    Hello Joe,
    I figured out what causes your curves to draw in the wrong "order".
    You are using two Y-axes, and DIAdem always draws the data for Y1 before Y2, no matter what the order of the curves is in the "Curve and Axis Definition" dialog.
    I am attaching your layout with a small modification, I changed the Y1 and Y2 axis order (I swapped which Y-axis the data is displayed on), and I get the following result:
    Once I looked at your layout it became clear why the order of the curves didn't reflect the order in which the curves were drawn. I didn't know this - so I just learned something new here as well.
    I hope this answers your question, feel free to ask if there is anything else I can help you with.
          Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Modified Report Layout.TDR ‏146 KB

  • OIM11gr2 - How to get currently logged in user details using oim api

    Hi All,
    I have a requirement to retrieve currently logged in users profile in the process adapter.
    I have tried with getSelfProfile in tcUserOperation and also ContextManager.getOIMUser API's however, in both the cases i am getting xelsysadm details only.
    Also as know request details in Process task mapping doesnot work for OIM11g onwards (its returning column not found exception )
    DOes any one has idea how to achieve this.
    PS. - i am using platform to retrieve API's.
    Thanks & Regards
    Swati Pandey

    You can get the logged in user name using the below java code:
    ADFContext adfCtx = ADFContext.getCurrent();
    SecurityContext secCntx = adfCtx.getSecurityContext();
    String user = secCntx.getUserPrincipal().getName();
    HTH

  • Adobe Acrobat Professional 6.0 for the Mac.    Can it be installed on multiple machines

    I own Adobe Acrobat Professional 6.0 for the Mac and no longer have my Mac machine.  I would like to send my original copy along with the serial number / license key (24 digits) to a friend in Australia.  Can I do this and will it install fine for him.  I am not sure if the key can be re-used.
    I would appreciate a response as this is a Christmas Gift. 
    Tony

    http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html

  • How can we get requester's user id using java code

    Hi,
    How can we get requester's user id using java code?
    eg: If i had logged in as xelsysadm and request a resource for user uid101 on the userid field it should display uid101 and not xelsysadm.
    also,
    I have a resoure "A" which on revoking should also revoke resources B and C. How can it be done. Resource A, B, and C are 3 different resource objects.
    ==Thanks,
    doki

    Ok, so there is a way, but it's not available during submission. You can use the findRequests api. From the result set, get the "Requests.Consolidated Data Value" value. In this information, you will get an xml formatted data. It provides the list of users on the request on the left side after submission. After the request is completed, this value is available. Upon completion, you could get the request information, get this value, and parse the information for user ids.
    In the same adapter, use the following API:
    formIntf.setObjectFormData(objInstanceKey, formHash)
    The formHash is a hashtable containing the field name on your object form, and the values you wish to populate it with. You could create a textarea box on your object form and populate the userids for who the request is for.
    However, this makes absolutely 0 sense. When you get a request, the list of userids are listed right there on the request.
    -Kevin

Maybe you are looking for

  • Share more than one photo library to apple tv

    Is it possible to share more tha one photo library to my 3rd gen AppleTV from my MacPro running Lion?  Today I loaded iPhoto with a different library, but my AppleTV can't access it - it only shows the current one. I want to stream all of my three ip

  • Monitor setup has changed - KDE Daemon after sleep

    After the monitor goes into powersave mode and is restored I keep gettung the Monitor setup has changed - KDE Daemon  box, anyone know how to get rid of this? everything seams to work but the box is getting annoying.  Logs dont show anything wrong an

  • Configuring GF4MX460 TV-OUT for Premier

    Hello All, I would like to know the steps I need to take to get Adobe Premier 6.5 outputting directly from its timeline straight to the TV-Out on my Geforce 4. I have managed to get everything else working in the past: dual display, (for both TV and

  • User defined Parent child report

    I trying to create parent child (dril down report). I able to refer parent column as bind variable in child report but unable to refer child column as bind variable in subsequent child report. select a,b from parent. select x,y,z from child1 where x

  • Wireless 5508 WLC's in a Mobility Group

    All, Scenario: Would like redundancy on 2 x 5508's but unable to utilise HA (SSO) due to internal WLC DHCP requirements. Mobility groups - Can 2 controllers in the same mobility group share a DHCP scope? I.E overlapping addresses or would the scope n