How do I force all url links to open only in Firefox ?

OS : WindowsXP-Prof_SP3
FF version 18.0.2
My default browser is FF, but not quite as expected.
Url links appearing Outlook 2010 messages or appearing in website pages are mostly still opening another browser (AvantBrowser) instead of Firefox.
How can I force links to access only FF ?
In other words how do I prevent to open links in any other browser ?
Most irritating are links appearing in Outlook 2010 messages.
Those links always open in AvantBrowser, which I don't want to uninstall for the moment being.
Despite the fact that I applied both procedures, according Mozilla HELP informations !
1. Settings within FF itself
2. Settings within Windows-XP (problem here)
Windows-XP refuses to modify existent current settings to the choices which I want to remain permanent... (as NOT shown in a screenshot I made ; but apparently can't be uploaded here .
After OK and closing all windows,including ControlPanel, nothing has been changed.
Going back to [ControlPanel>...> same window] to check if the option has been changed, my choices are gone and old settings remain unchanged ! Why ???
Like I wrote already procedure described in http://mzl.la/L8LwDs has already been done.

This screenshot shows the settings being asked for, but they are not registered by Windows. Each attempt to 'modify' the settings to new choices fails.
Do I have to restart system or is there some button to confirm the wanted choices ?
After closing this window and coming back to the same window, the settings which were chosen are lost and back again... as they were before.

Similar Messages

How can i force a mail link to open in the viewer and not in the Mail App?

Hello to everybody!
I've a trouble about the mail links in a digital pubblication. I've to force a mail link to open inside the viewer.
A normal mail link causes the exit of the app and switch into the iPad Mail App... Is it possible force to open the mail link inside the folio with the DPS?
I've seen other digital pubblication made outside the DPS that can open the mail tab of the Mail App without exiting the starting App...
Thank you in advance for your help!
Max

You can't with DPS, it will always launch the mail application registered with the operating system.
Neil

How can I force all photos to be stored only in low-res on my MacBook

From reading the description on the Preferences in photos it says
"Optimize Mac Storage - Store full resolution photos and videos in iCloud. Originals will also be stored on this Mac if you have enough storage space"
The last sentence here is a big issue for me. I don't know how my Mac tried to determine what 'enough' is but basically I need free space desperately and I need ALL photos to be stored in iCloud, and low-res versions only on my Mac. No ifs ... no buts. This works fine it seems on iOS devices but the amount of space saved on my Mac has been really poor.
Is there any way to do this?

Aperture makes it easy to move any Image's Originals from inside the Library to outside the Library, and from any directly-connected location outside the Library to another directly-connected location, and to move any Image's Original from outside the Library to inside the Library, at any time, singly or in batch.
Select the Photos container near the top of the Library Inspector. In the Browser, select all Images. Use "File ▹ Relocate Original", and select a destination and a Finder folder scheme. Moving 1.5 TB of files will take some time. Let it run.

Acrobat Pro 9 - URL link to open in browser in background (behind PDF)?

Hi! I've been searching for days now... does anyone know if it's possible using Acrobat Pro 9 to force a URL link to open in the background, behind a PDF in order to keep the reader at the PDF instead of instantly switching to their web browser?
This is used for a capabilities presentation, where we would like the view to continue reading the PDF but if they click links, the links will load in their browser where they can review them after finishing the PDF - instead of instantly being taken to the browser.
Any tips would be greatly appreciated.

Go the the Applications -> Utilities folder. In there you will find the Disk Utility app. When you run that application, you can select your hard drive. Then click on the Fix Permssions button.

How to add a new url link in a view of an existing webdynpro component?

How to add a new url link in a view of an existing webdynpro component?

hi ,
refer SAP online hep :
Implementing Enhancements in a View
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
Enhancements means inserting user developments into SAP development objects at predefined positions.
The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
refernce :
have a look at this article
How to Create Enhancement Implementation in Web Dynpro ABAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
as pointed correctly by Saurav in earlier thread
regards,
amit

How do I insert a URL link into a text document

How do I insert a URL link into a Word document

Don't have Word available to test, but it seems to depend on the program.
In Pages and TextEdit, if you drag the favicon from the addrss box in your browser into the document, it will be pasted in already formatted as a clickable link expressed in plain text. The favicon (I think that's the name for that element) is this item -
However, in AppleWorks 6.2.9, all that did was drop the raw URL into the document; and it is non-clickable, just text. In AW 6 you need to type the plain-text name for the link (how you want the underlined bit to appear), select that, then go to the Format menu and select Create Link, from it choosing Internet. In the new screen, the linkname will already be entered in the upper box; paste the URL into the lower box, and it's done.

URL link to open transaction in NWBC Desktop client

Hi!
I am trying to create an URL link to open a transaction in a role that I am using.
The webpage is shown in a web-chip as a part of FPM page inthe NWBC desktop client.
I have tried this type of concept: https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
The problem is that this opens the transaction in the HTML version of NWBC (inside NWBC desktop client).
However, I would do not want to use the HTML based version of the transaction. I want to use nativ abap transaction inside NWBC Desktop client.
I am able to open the transaction with a link from a webbrowser with this type of link:
sap-nwbc://https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
This link does not open at all from within NWBC....
How do I achieve opening a transaction via URL from inside the NWBC Desktop client?

Hi Stefan,
Same issue i have as well.
My Understanding is, in NWBC desktop, if you open a non sap (eg: html) page, NWBC becomes an IE Browser.
That means you are now out of SAP for that tab (with html page) and whenever you try to launch any SAP transaction (using the method from HTML) it will launch in a new window and ask for Login.
May be Experts like Samuli Kaski & Melinda Ludanyi can put some light on it.
But, I have one more solution for this which is partially working in my case. May be helpful in you case as well.
Issue: From some SAP transaction in NWBC (say tab A), you are launching the html page (say tab B) and then want to launch another SAP transaction (Say tab C) from html.
Solution: Embed the HTML in SAP using HTML Viewer class and launch SAP custom transaction using the interface IF_LSAPI. It will launch it in new tab as a sap transaction with your html page.
Now if you want to launch the SAP transaction from your html page (Which is embedded in SAP custom transaction) you can use HTML Viewer class Events and you can pass parameters as well. Re use the same interface IF_LSAPI and launch it in new tab
In my case i am facing problems as the web developer has so many things on java script and they are not working properly. He is working on it and i am hoping it will be fine.
Regards,
Nik

How do I close all tabs at one time without closing Firefox completely?

How do I close all tabs at one time without closing Firefox completely?

Open a new window. Go to the other window with all the tab. Close it. You now only have that newly open window.
Hub

Safari 3.0: How do I force all links to open in tabs without using cmd?

In a number of other browsers it's easy to set all links to open in tabs. I don't want any separate windows to open and I don't want to have to use the keyboard to force every single link into a tab.
How do I get Safari to do strictly tabbed browsing?
Thanks,
iMactel

Before posting the very same question, I searched first (like a good boy should) and found your post....which addressed the exact question I have.
I'm in the process (of hopefully) of transitioning from years of using Firefox to Safari. The reason: I'm amazed at how quickly web pages open in Safari compared to Firefox.
Anyway, after installing a few Safari add-ons, I'm feeling pretty good about the transion -- except for the fact that I NEVER want Safari to open anything in a separate window unless I specifically ask it to. Evidently, it's simply not designed to do this...

How can I extract all URL's into a list from 'mm_report' file?

I've Googled this with no luck; I have a 'mm_report' in xml format. It contains a lot of text that also includes approx 800 URL links I need to extract these URLs into a separate list. I've tried using a regular expression: href=\"([^\"]+) in 'Find and Replace' which successfully highlights the links but now need to know how to reverse this process so it deletes [strips] all surrounding text & only leaves me with a list of all URL's in this file.
Any advise, much appreciated.

Hi Hans,
here's an edited version to show just 3 links:
<?xml version="1.0" standalone="yes" ?>
<mm_report>
          <mm_reportname>          ResultsReport.xml</mm_reportname>
          <mm_reportdate>12/08/11 21:29:33</mm_reportdate>
          <mm_reportlocation>E:\\bond\</mm_reportlocation>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\1.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/1.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\2.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/2.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\3.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/3.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\4.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/4.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
</mm_report>
I would like this to return just:
http://www.mywebsite.com/1.jpg
http://www.mywebsite.com/2.jpg
http://www.mywebsite.com/3.jpg
Thanks.

How Can I Remove All the Links in a Document?

I want to remove all the internal and external bound links in
a number of my html documents. Is there any way I can do this with
one action. I tried using Control + F on </a> and replacing
it with nothing and that works. But Control + F on <a
href="URL"> doesn't work as the url for that is different every
time.
Is it possible to remove all the links in one sweep, I hate
to do it manually one by one as there are just so many?

Tanim23 wrote:
> Is it possible to remove all the links in one sweep
Yes. In the Find and Replace dialog box, set Search to
Specific Tag, and
select a in the drop-down menu alongside. Then set Action to
Strip Tag.
You can do this in the current document, a particular folder,
or the
entire site, depending on what you select in the Find in
drop-down menu.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS4",
"PHP Solutions" & "PHP Object-Oriented Solutions"
http://foundationphp.com/

How to add an outside url link to a navagation button in Dreamweaver Cs5.5

How or can I add an outside url link to a navagation button in Dreamweaver Cs5.5. If I try the properties/link it says that the link is an html and not a css.....
Thank you

Linking is done in HTML, not CSS (with the exception of a link to a background picture)
So, if your navigation is a list, you'd have the following in your HTML:
<nav>
     <ul>
          <li><a href="index.html">Home</a></li>
          <li><a href="about.html">About</a></li>
          <li><a href="books.html">Books</a></li>
          <li><a href="http://www.myexternalwebsitelink.com/inboundfromotherwebsite.html">External Link</a></li>
          <li><a href="contact.php">Contact</a></li>
        </ul>
</nav>
Here, in the example above, I'm using the HTML5 <nav>, but that could be an HTML4 <div class="nav"> and you will see a link to an internal page on the same website server for Home, About, Books and Contact with "External Link" pointing to another website external to the one we're on.
Make sense?

How to supply events with url links in a public readable event calendar?

When creating a new event on this calendar, how do I supply a url with
hypertext links so reader can click on it and lead to a 'more info' page?
I tried the example supplied by "Reviewer's Guide, iPlanet Calendar Server
5.0". From chapter 4, Advanced Features, I imported a supplied ical file
(ba_music.ics) to JSmith's BayAreaMusic calendar, I got no problem when
importing. Then, when I looked at the calendar, I expected to see hyperlinks,
yet what I saw were only plain text html, no links, no images( such as -
<html>
<a target=ics2 href=http://www.sfsymphony.org/>
<img src=imf/greynte2.gif align=left width=27 height=28>Symphony Concert<br>
8:00pm
</html>
What did I do wrong?
Ching-I

When creating a new event on this calendar, how do I supply a url with
hypertext links so reader can click on it and lead to a 'more info' page?
I tried the example supplied by "Reviewer's Guide, iPlanet Calendar Server
5.0". From chapter 4, Advanced Features, I imported a supplied ical file
(ba_music.ics) to JSmith's BayAreaMusic calendar, I got no problem when
importing. Then, when I looked at the calendar, I expected to see hyperlinks,
yet what I saw were only plain text html, no links, no images( such as -
<html>
<a target=ics2 href=http://www.sfsymphony.org/>
<img src=imf/greynte2.gif align=left width=27 height=28>Symphony Concert<br>
8:00pm
</html>
What did I do wrong?
Ching-I

HT1937 how do i find the url link from a video i recorded on my ipod

I recorded a video on my ipod touch and i have to send it in to the radio station. All they want is the url link but for the life of me i can't find it on my ipod or when i uploaded it to the computer.

When you connect your iPod to iTunes and select it from the device pane, does it not show the capacity and amount of space being used by music, videos, and apps?
You do not have to sync your entire library to your iPod, you can selectively control what does and does not sync.
No device has the exact stated capacity, this is not specific to iPods. There is always overhead that must be accounted for in the operating system running the device. Also, every hard drive is unique in it's capacity.... could you imagine the disaster of marketing if every package had to accurately (to the byte) reflect the capacity of the device?

How do I add a URL link to a JTextArea?

Hi,
I have a JTextArea that updates the status of my program.
How do I make some of the status updates URL links?
Thanks.
Vsh

JEditorPane can provide support for links relatively easily. Read the abstract at the top of the JavaDocs for an example.

How do I force all url links to open only in Firefox ?

Similar Messages

Maybe you are looking for