How do I format a internal Hard Drive from a PC/laptop

How do I format a internal Hard Drive from a PC/laptop...My old internal hard drive had problems so I took it out and I have a 100 gb Seagate ATA drive that I replaced it with. In the mean time I've been using a external drive to boot up my powerbook g4. Not sure of what to do.

Hi, capitala1. Start your Powerbook up from your Mac OS X installer disc and open Disk Utility from the Installer or Utilities menu (depending on which OS version it is). Select the newly-installed Seagate drive inside your Powerbook as the target, and format it "Mac OS Extended (Journaled)". It makes no difference at all that the drive came out of a PC laptop: this is exactly the same procedure you'd use if the drive had just come brand new from its manufacturer.

Similar Messages

  • Wndr4700 media router formatting hfs internal hard drive

    Recently switched over to all macs in our house.  I was thinking about getting a Netgear Wmdr4700 instead of a time capsule.  The router utility can only format hard drives as ext4 which from what I've read is not read/write compatible with macs without additional software.  However the router supports and recognizes pre formatted  hfs+, or hfs+ journaled drives.  Any ideas on how I can format an internal hard drive with a Mac mini or MacBook Air before installing it in the router?  Mabye I'm missing something...

    Hello,
    here is some info to help you out.
    time machine will work perfectly fine with ext4 file system this is the default file system for the unit, i have have other netgear NAS devices with ext4 and btrfs and they also work fine with time machine. but if you so desire...
    to format the drive with HFS+ you would need to do this via USB sata enclosure attached to mac mini or macbook air they cost about $20-30 the other option is if you know anyone with older mac pro (tower) they could format if for you or take it a place that repairs computers and they should be able to do this in just a few mins if they have a mac around, makes sure you create only 1 partition, GUID and choose mac osx entended journaled. make sure the wndr4700 firmware is updated first...ver 1.0.0.52 is the latest...then add newly formatted HFS+ drive  turn back on and wait until unit shows green HD lights up on front. then follow instuctions to backup..my other advice is to buy an external 2.5 inch USB 3 drive as a secondary backup for your macs using time machine as well attaching it to your macs once a month (dont attach it to the netgear, even though you could), for backup...1 drive will work for several macs, buy according to size needed, backup once a month to this as well and then hide drive in your sock drawer, 2 backups are better than 1, good luck.
    once your backups are all done, upgrade all your MACs to mavericks for free!!!!

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

    After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
    How can i do that?

    What did you "put as slave?" What Mac model do you have, exactly?

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • How can a format an external hard drive to Fat 32 format

    how can i format an external hard drive to a Fat 32

    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS (FAT)  Click on the Partition button and wait until the process has completed.

  • How can i get an internal hard drive cable replacement?

    how can i get an internal hard drive cable replacement?

    I believe iFixit sells them:
    http://www.ifixit.com/
    You can also go to an Apple store, they won't sell you the part, but they will replace it for a fee.

  • How do you dump a external hard drive from PC to mac

    How do i dump my external hard drive from a PC to my Mac

    If you don't see the external HD when you connect it to the Mac, then you need to use Disk Utility to format the XHD to a FAT32 drive. Once done it will read on the Mac and PC without any problems.

  • I'm trying to clone a internal hard drive from another mac using a usb connection.

    I'm trying to clone a internal hard drive from another mac using a usb connection to an external drive so that I don't lose the file before reinstalling the software but I keep on getting a message:
    "Restore Failure
    Source volume is read-write and cannot be unmounted, so it can't be block copied."
    Any advice on how to make a copy of this internal drive?
    Thanks!
    ....also the internal hard drive i am trying to copying run on a mac os x 10.5 and i'm reinstalling the software because the computer is not starting and only shows a grey folder with a question marks inside.

    I've had my Maxtor external OneTouch 250GB for about 18 months now and it hasn't skipped a beat. I have hear of people having their Maxtor drive just up and die but you will probably find that goes for all manufacturers.
    By the way, Maxtor is, amongst others, an OEM supplier to Apple.

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • Switched internal hard drives from G4 to Mac Pro - not being recognized

    I just transfered to internal hard drives from my G4 MDD OS Tiger and my Mac Pro isn't recognizing them in the bays. Jumpers were removed for slave option. Are the older drives not compatible with the newer computer? What am I missing?

    I did, and it bent a couple of the pins in the drives. I'm going to try to put them back in my G4 to see if they still work. In the meantime I went to Best Buy and talked to the Geek Squad who set me straight. I bought an SATA drive and now it's up and running with time machine.
    I just wish they were a little more descriptive in the type of hard drive to install.
    Thanks for your help!
    Pat

  • I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?

    I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?
    It is not showing on the Desktop or the left colomn of Finder (Set to do both in Finder Prefernces) and is not showing up under the Disk application under Utilities (Sorry can't remember the name off the top of my head!)

    cjz0r wrote:
     ...I'm starting to think it is most likely NTFS, am I looking at needing an Application to read the NTFS partitions on the drive?
    You should be able to read NTFS formatted drives, just not write to them. For that matter, USB Flash drives generally come formatted NTFS for use with PC's and they have to be able to mount on a Mac in order to reformat them for Mac use. The Windows utilities supplied on those Flash drives will be deleted when the drive is reformatted for Mac use so I routinely copy them to the Mac desktop first before reformatting.
    You might look into something like this http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ if the enclosure is an issue. It looks weird but it works.

  • If I have my old hard drive from my windows laptop, can I use that as a partition?

    i was wondering since i recently upgraded to a mac, if i could use my old hard drive from my windows laptop, with a usb connection, if i could use that as a windows partition for gaming and other things of that nature that are only support windows.

    If you mean that you want to run Windows from a USB
    drive, you can't.  Windows itself can only boot from
    internal drives.  This is a limitation of Windows.

  • Can I take a hard drive from a different laptop and replace it in my MacBook pro 2007

    My MacBook pro (2007) has  failing hard drive. Can I remove the hard drive from a different laptop ie. Toshiba, or HP and replace it with the failing hard drive?

    yes you can....but any files/data on the other drive will be gone.  also make sure that the drive you install is a SATA drive which is in your Macbook...
    make sure you have your original install disk if you plan on doing a clean install.

Maybe you are looking for

  • User exit /function module include in WM : how to write the code

    Hi all, I would like when TO creation in WM the field Queue (LTAK-QUEUE) to take a specific value I found the user exit MWMTO001  Enhancements for end of transfer order generation . First is it the correct user exit  for this purpose? Then as  I have

  • FM to simulate posting of a FI document

    Hi Experts ,                                I want to know the function module using which we can simulate a finance doucment (To check if the document has all the data required to be posted ) in transaction FV60.                  I will be very grea

  • I am unable to convert a Quark 9 file to pdf. Any suggestions?

    I've tried everything I can think of. It's a 340 page book with maps. I'm exporting it at 72ppi, but it may be that the maps are too large,

  • What if you gift an app to someone who already owns that app?

    I'd like to know what happens if you gift an app to someone who happens to already own it. Ideally, iTunes would check, and let you know there's no need to gift that app, and maybe suggest something else. Anyone know for sure what happens? Otherwise,

  • CC Adobe XI pro and Lifecycle

    I'm trying to get some help acquiring Lifecycle.  I understood that CC memberships activated before Oct 15th, 2012 were eligible for a free Lifecycle download.  My susbscription started Sept 26th.  Any help appreciated.