How do I "freeze" the top row

How do I freeze the top row so that I can see it even if I scroll down many cells?

Hi Spacecoder,
Though the answer you received "is not a solution" there isn't a solution. It's a fact, freeze panes is not an option in Numbers. Everyone hopes in the next version it will be an option.
Your question is the most asked question for Numbers. As you were asked, send feedback to the Numbers team explaining how important it is to you to have this feature.
Also, prior to posting any question use first the forum search feature. You would have promptly found the answer to your freeze row/column question. Using Search you'll see thousands of other questions have been asked, their answers will provide direct solutions, tips, or workarounds.
Use the regular Apple Support as well; http://www.apple.com/search/support/. In Numbers click Help > Numbers user guide, it will take you here: http://www.apple.com/support/iwork/
As Yvan stated we're endusers as yourself not Apple employees.
Again, welcome to Numbers Discussions, have fun here.
Sincerely,
RicD

Similar Messages

  • How do I enable the top row of touch buttons on Pavilion dv6000?

    How do I enable the top row of touch buttons on Pavilion dv6000, they're turned off.
    This question was solved.
    View Solution.

    Make sure that the HP Quick Launch SW is installed.
    Click the White Kudos Star to say Thanks
    Please mark Accept As Solution if it solves your problem

  • How can I freeze the header row in Numbers '08

    Hello,
    I've read through support communities and looked high and low through numbers, but can't seem to find a way to freeze my header row.  Any ideas?  Thanks!

    Hi April,
    Upgrade to Numbers '09, where the feature was added.
    The closest you can come in Numbers '08 is "Repeat Headers" in the Table menu, which will show the header row at the top of each page of the document as it would be printed.
    Regards,
    Barry

  • I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

    i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

    Hi Jay,
    Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
    "Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
    Regards,
    Barry

  • The top row of the keyboard of my iPhone 4S, in the password screen, is not responding to my fingers. How do I fix this?

    iPhone 4S
    IOS 7.1.2
    This problem occurred after a whole days use of the iPhone without any hitches. I first discovered the problem by unlocking the phone and then swiping to the password screen to find that the top row was not responding to my fingers at all. Because of this I could not type in my password to unlock my phone. I then tried to restore my phone but could not because it needed the phone to be unlocked. I then tried holding down the home and sleep button at the same time until it turned off and on again, but this did not fix the problem. I also tried switching on the Voice Over mode on and trying to unlock the phone through that but of course it didn't work. I have also left it overnight but I was still unable to unlock the phone the next day. Any suggestions on how to fix this would be greatly appreciated.

    *UPDATE*
    I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area.

  • I'm typing dates across the top row. I want the date to be 12/13 and the program changes it to Dec. 13. It is making me mad. How do I get it to stop doing the change? I want a numerical number.

    How do I get the numbers program to type a numerical date across the top row? It wants to change it to Dec. 13 instead of 12/13.

    Amy,
    I hope that you can forgive Numbers for converting the date you enter as 12/13 into the default format of "December 13, 2011", one that is popular with many users.
    You can change to any of the supported date formats by using the Cells Inspector, Date and Time options.
    Select the top row of cells and use the inspector to set the format. You may do this before or after making the entries.
    Jerry

  • HT5624 I was prompted to update to ios7 so I did as usual. But this update has made my ipad a piece of junk. I am unable to access Siri, I can't read the faint print particularly those tiny letters on the top row which show the visited websites, etc.

    I updated to iOS 7  last might after being prompted by Apple. This caused me to lose many useful features of my iPad2. First I find that Siri has disappeared. When I contacted Apple support, the guy who took my serial # and model # verified things on his end and said emphatically that I should have Siri, but could't help me find it. Another rep simply disconnected me after seeing that she was unable to help me with the problems. After wasting hours with these people and waiting several minutes for their promised supervisor to come online, I was again disconnected by them. My second major problem I wanted solved was the hard to read fine and faint print. I don't have good eyes and with iOS 7 on my iPad2 I am now unable to read the top row which has the list of websites in avery faint and fine print. I could read everything on my iPad until yesterday evening when I made the mistake of updating to iOS7. Till yesterday evening I loved my iPad but after that update to iOS 7 last night it is a piece of junk for me. Hope there is help somewhere out there to restore  Siri and other useful features of iOS 6 or get iOS6 back on my ipad So I can use it again. The chat with apple support has not helped at all as they themselves did not know that Problems like the ones I mentioned to them even existed with this iOS 7. I want my iOS 6 back!!!! CAN ANY ONE HELP !!!!! Also how can I reach anyone in Apple who is knowledgable and also has some authority to do something about it.

    Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
    As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • My slideshow doesn't show the pictures anymore - I can see them in the top row but they are not displayed in slideshow

    I created a slideshow and when I went back to look it plays the music but not the pictures - I can see them in the top row but they don't show up even if I click on them - music still plays!

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    are you able to view the photos in full size in the library?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • When searching for something on amazon or ebay the top row always goes to the far right of the screen.

    So when i look up something like "shoes" in the amazon search box the top row of items moves over to the far right. And most are no longer even on my screen
    I checked on I.E. and i had no issues with this so i assume its a firefox issue.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Why isnt the top row of my keyboard working

    my ipod touch (4th gen) was working perfectly this morning 
    later today i was playing vooleyball with my brother and i had set my ipod down in the grass 
    then when i went inside i was answering somw of my texts but the top row of my keyboard wasnt working  the backspace buttoin isnt working, its hard to press the send button, and the thing where you slide down to look at messages/notifications and the weather isnt pulling down
    PLEASE HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • The top row of keys (fn keys) stuck on function only?

    I was working normally on my Mac (Air with OS X Yosemite) and suddenly the top row of keys (such as volume, brightness etc.) stopped working normally. It acts as a function key only and I can't adjust volume, brightness etc. from there, which is annoying. I have checked I don't have the "use all F1, etc. keys as standard function keys" on in settings and I just don't know what to do.
    Does anyone knows the solution?
    Thank you

    Hello there, VeganB.
    When one or more keys are not responding, the following Knowledge Base article offers up some great steps for troubleshooting your keyboard:
    One or more keys on the keyboard do not respond - Apple Support
    Some keys don't work as expected
    From the Apple menu, choose System Preferences.
    From the View menu, choose Speech.
    Click the Text to Speech tab.
    If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
    Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
    Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
    In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
    If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
    If the issue persists, use Keyboard Viewer to help isolate the issue:
    Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
    Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
    Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
    From the Input (flag) menu, choose Show Keyboard Viewer.
    If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
    Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working.  If the keys work while started from the Install disc, then the keyboard itself is working correctly.  Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am having trouble moving any icons in the top row on my iPad.

    I know how to move icons from screen to screen, or within the same screen.  But when I move icons that are in the top row of any given screen, I can not move them very far without them jumping back to their location.  It's as if the iPad loses connection between my finger and the glass and it sends the icon to its original spot.  The only way to get the icon to move is if I drag it to a lower row of icons super slow, and then I am free to move it as I normally would.  But sometimes that doesn't even work.  I feel like it is a glitch on that specific part of my iPad because when I turn it upside down, I don't have this issue.  I was just wondering if anyone has seen this happen before.  There isn't any issue as far as I can see with using the touch feature on that part of the iPad with any other apps, just when I try to move the top row of icons.
    Thanks in advance for any help or thoughts.

    I have never experienced that or read about it either but before you resort to restoring - and that may be what you have to end up doing - try the basics first.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Sometimes just restarting the iPad can really help. The resolution may end up being more complicated, but try the simple things and then move on.

  • System preferences lost the top row

    I have lost the top row from the System Prefernces window, the one that has your preferred icons and the 'show all' icon. How do I get it back?
    Running system 10.3.9
    Thanks.

    No George, I was talking about 'Show/Hide Toolbar' item at the bottom of the 'View' menu of the 'System Preferences' application.
    Nonetheless, I agree with your suggestion.
    Cheers!
    --neeraj
    Dual 2.5 GHz G5; 23 Cinema Disp; 667 Mz TiBook, G4; 15 LCD, PMac 7500, 15 Multiscan Mon    

  • How do I repeat the same row more than once in report 10g

    How do I repeat the same row more than once in report 10g
    So I can print the bar code more than once
    in report;
    Edited by: user11106555 on May 9, 2009 5:50 AM

    GREAT THAN X MAN
    It is already working, but with the first ROW
    select ename from emp
    CONNECT BY ROWNUM<=5
    ENAME
    SMITH
    SMITH
    SMITH
    SMITH
    SMITH
    ALLEN
    WARD
    JONES
    MARTIN
    BLAKE
    CLARK
    SCOTT
    KING
    TURNER
    ADAMS
    JAMES
    FORD
    MILLER
    BUT I want this result
    Item1
    Item2
    Item3
    to
    Item1
    Item1
    Item1
    Item2
    Item2
    Item2
    Item3
    Item3
    Item3

  • How can I filter the LOV rows at the runtime

    I am working in oracle forms 6i.
    My lov is based on a view. If I selected one row from LOV, that row should not appear in list box.
    I would like to restrict rows before saving a form. How can i filer the LOV rows at the runtime?
    Please help me.

    Dear Mr.MH_BD,
    Thanks for your immediate response,
    My form is built based on master and detail link.  On the multi row detail section I am invoking this LOV.  The record group containing the following query:
    select fees_id,fees_name,term_fees from sk_fees_mst where fees_bal>0;
    fees_id
    fees_name
    term_fees
    12
    Tuition Fees
    2500
    13
    Smart Class
    100
    14
    Admin Fees
    300
    If I selected the fees_id 13 for the first row of detail section, then the LOV should display only the following in the next row:
    fees_id
    fees_name
    term_fees
    12
    Tuition Fees
    2500
    14
    Admin Fees
    300
    (ie.) Before commit form I need to filter the already selected fees ids from record group.
    Thanks in advance.

Maybe you are looking for