How do I fully Utilize the GPU's in CUDA enabled Projects?
We have purchased a Dell R7610 for testing in our facility.
It has two Quadra 4000's installed, updated, and working with Premiere Pro CC 2014.1 fully updated as of today.
We are successfully using CUDA in our projects.
I have two questions:
1. When rendering or exporting or both at the same time, the GPU's never get above 25% utilization. How do we better use the available power?
2. When rendering and replacing in, the GPU's aren't being used at all.
Thanks for any info that you might have.
You might want to download our Premiere Pro Benchmark (PPBM) and the second test is a very heavily loaded MPE timeline that on most systems will show almost 100% GPU usage. If you do not have much in your test that can use the GPU it will just sit there and wait. Take a look at this
Similar Messages
-
Fix: Change the Linux kernel to fully utilize the 6GB memory
Problem:
We installed Oracle apps 11.5.10 on Redhat AS2.1 with 6GB memory and couldn't run it well one year ago.
Fix:
Change the Linux kernel to fully utilize the 6GB memory.thank you very much thestringer.
I have replaced the mirrorlist with the pacnew one.
I don't use pppoe, so I ignore the message
I've been looking into /var/log/errors.log and I found this:
Date, time etc: Intel AES-NI instructions are not detected
Should I install these AES-NI instructions ? -
How can I fully used the display power in VMWare Fusion
Hi,
I am a newbie in in MAC. I've bought a MBP with embedded & standalone display card. I have installed windows in VMWare. However, it's display power in Windows Experience index is just 1. I think it's due to the display driver used in something call "WM SVG2", (not sure, as I am not next to it now). Also, I found there is an unknown device which I think is related to the build in Webcam
Can someone help me:
Can I fully utilized the display power of my MAC and how?
How to resolve the unknown device related to the Webcam?
THX.
MacPro Mac OS X (10.5.7) Windows VISTANo, sorry. There's no way to do that in a virtual machine. Remember, that OS X is the booted operating system and it has control over your hardware. The virtual machine, as far as OS X is concerned, is just another application running alongside any and all other applications (and really, that IS all it is, just very clever software to emulate a computer within a computer). Any hardware calls from Windows have to go through the virtual machine software interface and then are handled by OS X. OS X does not support using both video subsystems simulataneously, and even if it did (or perhaps will, in future machines) your installation of Windows cannot access ANY hardware directly, so you still would be unable to achieve true native Windows performance.
-
Hi all, Am really hoping someone can assist me. I accidentally deleted the PWA web directory on our Project Online (online MS hosted) which includes all the reference web pages and services.
How do I reinstall/recover this?
ThanksHello lethalleigh03,
There are few points to note down here.
1. If you simply clicked on delete the site you can restore that site by going to Recyle bin.
2. If you remove the feature and then delete the site in that case your PWA feature is removed so all your data will be deleted.
Either of the case you can approch Microsoft support to restore the site. After deleting the site data will be still there with Microsoft for 14days post that it will be deleted Permanently.
Amol -
How to activate and utilize the Creative Cloud with a proxy server.
Anyone know how to get the cloud activated from behind a firewall / proxy server?
My Adobe Application Manager connects, updates and downloads all applications.
However, when I open an application, it does not detect a connection to the internet and states that an "Internet connection is required for subscriptions."
So what is it that I have to do to get this to work? Many people are having this issue, do a google search on this and you will not find a solution. We need one from Adobe.
Thanks! -
How do you fully drain the battery faster or give me a step by step how to fully drain the battery
please help
Put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034 -
How can I enable the GPU option on a new mac pro with 2 AMD D700 graphic cards?
I have recently purchased the new mac pro and I saw the GPU option is not enable and only recognizes the CPU one, what is frustrating. Does anybody know how to enable the GPU option?
thanksSee this for details of how the GPU is used in After Effects:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html
Note that your card will be used for all of the GPU acceleration features but one---the ray-traced 3D renderer---which requires an Nvidia GPU. That is an obsolete feature that you don't need to worry about, anyway. There are many better alternatives to using 3D in After Effects, including Cinema 4D, which is now included with After Effects:
http://blogs.adobe.com/aftereffects/2013/04/details-of-cinema-4d-integration-with-after-ef fects.html -
Final Cut Pro 4 utilize the G5?
I am running have Final Cut Pro 4.0 on a G5.
I was wondering, does FCP 4 fully utilize the all the features of the G5? Does FCP 4 use the 64 bit motherboard? Does it take advantage of the Dual processors?To crib from Shane:
#29: Need AGP Graphics card
Shane's Stock Answer #29
You either need to either:
1) use the following hack -
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
or
2) Upgrade to FCP 5
http://docs.info.apple.com/article.html?artnum=302667
Right now you can upgrade to the Full Final Cut Studio for $199 - see:
http://www.apple.com/universal/crossgrade/
Patrick -
I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?
I had a year long CC membership that expired at the beginning of the October.
After realizing that, I attempted to start a free trial of photoshop to work on a project. My Adobe account states that i'm on a trial, but my (Mac) dashboard CC app won't allow me to start the program. I have reinstalled both Creative Cloud and Photoshop CC but still get this message. -
How can we tell if the iphone is already fully charged in ios7? Even if its 100% the thunderbolt icon is still displayed. Not like in ios 6 that we will know when to unplug the charger because there is an indicator.
For those who seem unfamiliar with what is being asked:
On iOS 6 and older, just because the phone reached 100%, didn't mean it was Fully Charged. The way you could tell was the lightning bolt symbol that indicated the device was charging would change to an outlet plug when the device was not only 100%, but also stopped accepting further charge. This symbol switch would occur anywhere from 5-15 minutes after the device already was displaying 100%.
Now, on iOS 7, while it still reaches 100% with that same lightning bolt charge symbol, during the 100% point, it never switches to the plug symbol to indicate the charge period is totally finished.
Can anyone confirm if there is a way to see this charge completion in iOS 7 since it appears that there is no longer a symbol for it? Is there any indication that Apple may have changed the charging display so that now it only displays 100% when it would have previously displayed that plug symbol? -
How to connect utilize the optical drive in G4PowerPC to a 2013 intel Macmini?
How do I connect and utilize the optical drive on my G4 PowerPC Macmini with my new Intel Core i5 Macmini running 10.8.4?
You can use your G4's DVD drive with your Mac mini if the old computer has got Mac OS X 10.4.11 or newer. See > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US
-
How can I utilize the feature "Project Proposal Workflow"?
Hello,
I am looking for any reference shows how can I utilize the feature "Project Proposal Workflow" in creating a Demand Managment process in Project Server 2013.
ThanksHi New_page,
Basically this feature allows you doing what is called "ideation" in Project Server. From a SharePoint list (either in a dedicated site or directly in PWA), you can create ideas of projects and then initiate a project in Project Server from
this list, mapping the list's columns with enterprise project custom fields and choosing an enterprise project type.
See some references below:
https://azlav.wordpress.com/2013/12/09/bulk-importing-projects-into-2013/
http://www.alexandervanwynsberghe.be/basic-ideation-with-sharepoint-and-project-online/
http://blogs.office.com/2012/11/05/demand-management-and-ideation-in-microsoft-project-online/
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
I cannot determine how to utilize the voice function while in the fitness mode. On one or two occassions it worked but I do not know how it was activated. It gives a voice summary and new summary screen for the workout.
Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
would appreciate any help on this matter how to centralize the window it is fully to the right of the screen it is an imac 20" 2006 model
Even when I move the screen far to the right as I can, there is at least a pixal or two that I can drag to the left.
Are you wanting to auto center the screen. You would need to use AppleScript to do this.
How are you trying to move the screen to the center? Any, why does this fail you?
Robert -
How to fully close the process? Let the light close under the widget on desk?
How to fully close the process? Let the light close under the widget on desk?
Make the App active. The to completely close that App do one of these:
Mouse click the App name in the menu bar and select Quit "App name"
or
Commnad-Q
Maybe you are looking for
-
I got my ipod for christmas this year its the 4th generation.It keeps turning the volume down by its self,when i try to turn it up it does not work. It wont let me i dont know why so i cannot play music on my ipod which defeates the reason i got it.A
-
Disabling onboard sound on K8T Neo?
Hello, I'm probably being really stupid here but I just can't seem to find the BIOS setting to disable the onboard sound. Can't find it on any of the BIOS pages, can't find it in the manual and there doesn't seem to be a dipswitch on the board itself
-
Facebook chat - sending messages to offline contac...
Whenever I am writing something to a Facebook contact via Skype, and this person happens to go offline, even if it is just for a minute, the Skype window prohibits me from typing anything else as it changes to the "x is offline. Send SMS" window imme
-
Hi, I have a requirement to Print the Company name in GE Inspira font. I have installed the GE Inspira font in my local machine. Then in my template I selected the same font ,but PDF output it is showing Arial Font. Could any body please tell me the
-
WLS 8 Once the db password has been set through the console, is there a way to update it at run-time (preferrably programmatically)? OR EVEN BETTER: is the db password maybe exposed as a manageable resource? (Hmm.. I guess first and second question a