How do i gain points in the community?

Guys i'm new here, just wanna know how can i earn points?

Welcome to the Support Communities. These tutorials may also be of help:
Reputation, status levels, and privileges
Answering questions

Similar Messages

How to remove links pointing to the same page?

I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, Windows

Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

How do I get rid of the community toolbar error message

how do I get rid of the community toolbar error message

Folks,
Here is THE answer. This has been a problem of mine for MONTHS. Use this link and it will DELETE that "community toolbar" notice. Thanks to another person for posting this:
http://thefreedictionarycom.ourtoolbar.com/uninstall/
IT WORKS!

Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

How do I get rid of the community toolbar error message when I select Safari?

How do i get rid of the community toolbar error meessage when i select safari

Folks,
Here is THE answer. This has been a problem of mine for MONTHS. Use this link and it will DELETE that "community toolbar" notice. Thanks to another person for posting this:
http://thefreedictionarycom.ourtoolbar.com/uninstall/
IT WORKS!

How does someone earn points in the Apple Support Communities?

How does someone earn points in the Apple Support Communities?

Hi mariksmit,
mariksmit wrote:
Too bad most guys i replied to found solutions but didn't acknowledge it.
That happens. Many Original Posters don't reply. Just keep helping.
When I get a thank you (without points) that gives me a buzz. With points, a bigger buzz.
Regards,
Ian.

How do I gain points in LUV?

QuestionHow do I gain points in LUV?
Answer
There are two ways to gain points for LUV. Let me just explain how that works.
One way is by giving LUV to another user. Each time you give LUV you'll earn points. See this chart below to see how much you get for each package.
The other way to get points from LUV is to receive it. Everytime you receive LUV you'll earn points too! This next chart shows you how many points you get from those packages above.
You also see those gold hearts. Those hearts are the LUV the recipient gets in turn for receiving LUV! So if I give Laura 100 hearts she gets 1,100 points and 50 LUV. Laura can give out that 50 LUV to me or whomever she chooses.
Now go out there and share the LUV!
Click here if you would like more info on giving LUV.

Exciting~~~ NOT Confusing~~~VERY.. the reason I am confused: I have a friend who also didn't quite understand the new system so we wanted to TEST IT..... WE AGREED to send each other 3 luvs (He was at my house) I sent him 3 and he sent me back 3 (these were our 3 free luvs) Please EXPLAIN how that works? We FEEL that we should have had the SAME amount of LUV points in the END. It appears that my
friend did not receive all the LUV I sent to him. SO ? ?? how come I ended up with total of 435 luv ~ YET he only received 370 luv ~~~~ We both started with NONE; we did the exact same thing???? I sent my 3 LUV hearts to him, he sent his 3 LUV hearts me.. (25 for each LUV heart sent) I earned a total of 75 points for this; plus he sent me 3, which should have been an additional 60 points I earned ~ 20 per heart received. Grand total of 75 plus 60 equals =135 points. This does NOT seem FAIR to me at all.
Also, You don't actually give a GOLD price listed that the the hearts will cost YOU.. so how much is it to buy say 10 HEARTS ?? an actual gold price per heart would be nice to know, or even for 10, 50 or 100 hearts. I also prefer the old game.. I agree with what sendmenoflowers had to say above "If you wanted to add a way of cashing in gold to buy extra luvs, you could have done so without completely doing away with the old system. All I wanted to do is send some luv this morning and I am not sure if it actually sent. The old system had a screen that showed me what I sent to my friends and what I have received."

How can I assign points to the alternatives in a question?

Hi! I am building my first quiz in Captivate and I have this little problem I haven´t been able to solve. I want a make a test that meassures how stress you are att work. It looks like a survey, I´ll have about 20 or more questions with the same type of alternatives, no right or wrong alternatives, but you choose the one you agree the most with. The thing is that i want to give a value point to each alternative and be able to have a score at the end. See the example.
How often do you feel stressed att work?
1. never : 0 points
2. one a week: 2 points
3. three times a week: 3 points
4. Everyday: 4 points
Att the end, the score you get tells you how stressed you are, but instead of showing a result in term of points, you´ll get a text giving you feedback and recomendations for better health. Can I do that in Captivate? I haven´t been able to find a way to do that yet...
Thanks for any help you can give me!

Hello,
Tried putting something together that could be possible, concentrated on the workflow. There will be some repetitive tasks to be done however, problem is that a click box cannot stay for a whole project, which means that a click box gets its proper ID on each slide. Will try to explain, it is up to you to judge if this is acceptable, or if you'd go better with a Flash app.
Created (for the moment, perhaps you'll need more if p.e. for Q1-Q10 you need a separate result for A and for B, result for Q11-Q20...) two user variables:
v_AClick to store the number of clicks on A-option
v_BClick to store the number of clicks on B-option
The results can then be used later on for a condition (did not write it yet).
Created a first slide with these objects:
dummy Text Caption 'Option A' (will be replaced later on with question text)
click box covering up this Text Caption, named it (ID) ClickA1 (this is the tedious part, has to be done for each CB; ClickA2, ClickA3...)
dummy Text Caption 'Option B' (will be replaced later on with question text)
click box covering up this Text Caption, named it (ID) ClickB1 (this is the tedious part, has to be done for each CB; ClickB2, ClickB3...)
imported a 'sign' to be showed after the user clicked into the Library, and put an instance to the right of each Text Caption, those were labeled VinkA and VinkB. Very important: set those instances to 'Show for the entire project', which avoids to have them duplicated to each slide, we will hide and show them as necessary.
button 'Next' which on Succes jumps to next slide.
The blue Text Caption was for me, to check if the actions were functioning, shouldn't be there in the end file.
I created a first Advanced action, labeled it HideVink (sorry for the Dutch, Vink = the green symbol), to be triggered on entering the slide:
Hide VinkA
Hide VinkB
Second/third action, labeled A_Action1/B_Action1 to be triggered by clicking on the ClickA1/ClickB2 with these actions:
increment v_AClick/v_BClick with 1
hide the other clickbox, thus ClickB1/ClickA1 to avoid that the user could click on both options
show AVink/BVink
Here is an example, action A_Action1
Those two actions have to be duplicated for each Question slide (A_Action2, B_Action2,....). What has to be changed in the duplicates is only the number of the Click Box, that is why I labeled them to make the process easier.
Now I duplicated the slide as many times as necessary. The actions for button and entering slide are OK, but the actions for the click boxes have to be adapted (tedious).
Why did I use 'dummy' Text Captions: I should export (File menu) the Text Captions to a Word-document, change the dummy texts (left column) to the real captions (much easier in one doc) and re-import them into the CP-file.
That was my homework, as promised. Hope it helps, even if you choose to go the Flash-way after all.
Lilybiri

How to increase Decimal Points for the BOM Component Quantity

Hi All,
While creating BOM:
Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
I can able to give only upto 3 decimal points, but the requirement is more than that.
I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
Thanks and Regards
Khadeer

Khadeer,
You would be better off changing the base quantity of the parent part. Instead of "1 EA parent contains .00003MG of component" you could say "100 EA parents contain .003MG of component".
Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP. In my view, there is no need of this kind of headache.
Best Regards,
DB49

How to put break point in the update routine

I am trying to create a break point in update routine. I can do that in the start routine but I would like to know how I can include a break point in update routine in Q.
Thanks

Go to Monitor Screen of the data load -> Details tab -> data processing -> right click on Data Packets -> select simulation -> select update rules and give no.of records you want to debug and then system will display the code where you can debug by giving break points.
Hope it helps..

How Do I Turnoff Getting Emails The Community?

How do I turnoff/stop getting messages from the Apple Support Community? Help!

Try the following user tip with that one:
Stopping emails from ASC

My iPhone 3GS has now died on me three times within a fairly short time. I have seen how to restart it here in the community, but that cannot be a permanent solution. Is it a battery problem, I wonder.

Is it a battery problem when my iphone dies repeatedly?

Most likely is battery problem. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.

How to do bullet points?

Hi...i have read the keynote manual but i am not sure how to have bullet points in the middle of a slide as opposed to always being on the left hand side of the slide. Can anyone please help. I've tried inspector and the help guides but im not getting anywhere. If anyone could help i would be extremely grateful
Thanks
Rob

What you want to do is just make the edge of the text box be in the center of the slide. This will be easier if you turn on guides for the edges of objects - to go your preferences, rulers preferences, and check "show guides at object edges".
Now take your text box and just resize it so that the bullets are where you want them to be. You may need to set them to no indent (using the inspector) in order for the object edge guides to be helpful - when the edge of the object is in the middle of the slide, you should see a yellow vertical line that cuts through the entire slide to indicate this.

HOW points get you privileges within the community

1. Create an account.
2. Receive welcome email: "Welcome to Apple Support Communities! ... "Participate: Check out the community by reading existing discussions and see what the latest buzz is about. Got answers? Post responses, enlighten the community, and earn points! See how points get you privileges within the community."
3. Go to link to see how points get you privileges.
4. Read what points are...
OK, so it explains how to get points and that they give you privileges, but no mention of how points get you privileges or link to that information. Not that I really care, but pointing it out. Is it just another "status" in our communities for people to feel good about [authoratative, look at me], or does it really provide something worthwhile relative to being helpful and providing Apple's support for them?

Refer to ... 'More like this', this page, right hand column, bottom entry ... 'What's the benefit of accruing points in Apple communities'
Carolyn Samit's excellent answer details all the levels and the justification for taking part in community discussions.
Personally, simply scouting around the different sections is an education in itself and I would heartily recommend you to take an interest.

How to include a KB Update into a WIM in order to point to the WIM when using DISM (details inside)?

Hi, I was told in another of the forums that my issue
is best suited for the TechNet audience. Previously, I posted it here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/how-to-include-a-kb-update-into-a-wim-in-order-to/e7015076-b4a9-4862-a73b-6c58b4c82461?tm=1409598696763
I've been struggling to fix a corrupted file.
Context: I feel that something is not right with the computer, so I started poking around.
I used "sfc /scannow" from an elevated command prompt and the result was:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log <var style="border:0px;margin:0px;padding:0px;vertical-align:top;-webkit-font-smoothing:antialiased;">%WinDir%</var>\Logs\CBS\CBS.log.
I looked in the log. This message appears 4 times:
Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate",
TypeName neutral, PublicKey neutral in the store, hash mismatch
There is also the following message:
This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
I'm not positive what to do next, but I have been led to believe the problem is that Flash files in version 6.3.9600.16407 are corrupted, that I need to find which KB updates Flash to this version, download the file, add it to a new WIM, and point
to it when using DISM. I'm not positive this is correct, but it was suggested.
I downloaded the KB update: kb2889543, but I do not know how to add it to a new WIM or what the repercussions of doing so will be (e.g. Will I lose everything and have to restore my documents, etc from my external drive by doing this?).
So, the question is: How can I include a KB Update into a WIM and tell me what the result will be when once I do and point to it when using DISM?
Secondarily, if this is a bad way to move forward with the issue, would some kind soul offer sage advise on how to move forward with resolving the original issue?

Hi TTQSTTQS,
As you mentioned in the answers forum, when run the command DISM /Online /Cleanup-Image /RestoreHealth, we received the error message “The source files could not be downloaded. Use the "source" option to specify the
location of the files that are required to restore the feature”.
When run the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess, we met the same error message.
I think there are some mistakes in the source setting, so we meet the same error messages.
As I mentioned in the last reply, we need a mounted image as a repair source, and then use this path.
We need to configure a Windows repair source. Please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825020.aspx
Please refer to the following steps to set the source image.
1. Assign Drive Letters to Partitions by Windows PE.
2. Capture Partition Images using DISM
For more information, please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825072.aspx
Then, we could try the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How do i gain points in the community?

Similar Messages

Maybe you are looking for